From: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 2/2] spi: fsl-espi: add (un)prepare_transfer_hardware calls to save power if SPI is not in use
Date: Wed, 03 Dec 2014 07:56:19 +0100 [thread overview]
Message-ID: <547EB413.8050604@gmail.com> (raw)
Use (un)prepare_transfer_hardware calls to set fsl-espi to
low-power idle if not in use. Reference manual states:
"The eSPI is in a idle state and consumes minimal power.
The eSPI BRG is not functioning and the input clock is disabled"
Signed-off-by: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
drivers/spi/spi-fsl-espi.c | 46 +++++++++++++++++++++++++++++++++++-----------
1 file changed, 35 insertions(+), 11 deletions(-)
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index e5702c9..d0a73a0 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -588,6 +588,38 @@ static void fsl_espi_remove(struct mpc8xxx_spi *mspi)
iounmap(mspi->reg_base);
}
+static int fsl_espi_suspend(struct spi_master *master)
+{
+ struct mpc8xxx_spi *mpc8xxx_spi;
+ struct fsl_espi_reg *reg_base;
+ u32 regval;
+
+ mpc8xxx_spi = spi_master_get_devdata(master);
+ reg_base = mpc8xxx_spi->reg_base;
+
+ regval = mpc8xxx_spi_read_reg(®_base->mode);
+ regval &= ~SPMODE_ENABLE;
+ mpc8xxx_spi_write_reg(®_base->mode, regval);
+
+ return 0;
+}
+
+static int fsl_espi_resume(struct spi_master *master)
+{
+ struct mpc8xxx_spi *mpc8xxx_spi;
+ struct fsl_espi_reg *reg_base;
+ u32 regval;
+
+ mpc8xxx_spi = spi_master_get_devdata(master);
+ reg_base = mpc8xxx_spi->reg_base;
+
+ regval = mpc8xxx_spi_read_reg(®_base->mode);
+ regval |= SPMODE_ENABLE;
+ mpc8xxx_spi_write_reg(®_base->mode, regval);
+
+ return 0;
+}
+
static struct spi_master * fsl_espi_probe(struct device *dev,
struct resource *mem, unsigned int irq)
{
@@ -614,6 +646,8 @@ static struct spi_master * fsl_espi_probe(struct device *dev,
master->setup = fsl_espi_setup;
master->cleanup = fsl_espi_cleanup;
master->transfer_one_message = fsl_espi_do_one_msg;
+ master->prepare_transfer_hardware = fsl_espi_resume;
+ master->unprepare_transfer_hardware = fsl_espi_suspend;
mpc8xxx_spi = spi_master_get_devdata(master);
mpc8xxx_spi->spi_remove = fsl_espi_remove;
@@ -761,25 +795,15 @@ static int of_fsl_espi_remove(struct platform_device *dev)
static int of_fsl_espi_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
- struct mpc8xxx_spi *mpc8xxx_spi;
- struct fsl_espi_reg *reg_base;
- u32 regval;
int ret;
- mpc8xxx_spi = spi_master_get_devdata(master);
- reg_base = mpc8xxx_spi->reg_base;
-
ret = spi_master_suspend(master);
if (ret) {
dev_warn(dev, "cannot suspend master\n");
return ret;
}
- regval = mpc8xxx_spi_read_reg(®_base->mode);
- regval &= ~SPMODE_ENABLE;
- mpc8xxx_spi_write_reg(®_base->mode, regval);
-
- return 0;
+ return fsl_espi_suspend(master);
}
static int of_fsl_espi_resume(struct device *dev)
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
reply other threads:[~2014-12-03 6:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=547EB413.8050604@gmail.com \
--to=hkallweit1-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.