All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Christie <michaelc-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
To: "Martin K. Petersen"
	<martin.petersen-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
Cc: open-iscsi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	jazz-jYkeLfz6glqHXe+LvDLADg@public.gmane.org,
	linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: iSCSI request keep rejected by microsoft iSCSI target because of write_same check
Date: Wed, 03 Dec 2014 11:08:23 -0600	[thread overview]
Message-ID: <547F4387.5010207@cs.wisc.edu> (raw)
In-Reply-To: <yq17fy9mnsx.fsf-+q57XtR/GgMb6DWv4sQWN6xOck334EZe@public.gmane.org>

On 12/2/14, 9:09 PM, Martin K. Petersen wrote:
>>>>>> "Mike" == Michael Christie <michaelc-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org> writes:
>
> Mike,
>
> Mike> This was the issue we worked with Microsoft on wasn’t it? You guys
> Mike> figured out it was fixed in their target in a recent release
> Mike> right?
>
> The issue we worked recently was wrt. the thin provisioning reporting.
>
> The WRITE SAME problem was that the target returns an iSCSI-specific
> error code rather than a check condition with ILLEGAL REQUEST. You were
> going to talk to MS.

Are you sure about this? The issue you are talking about and the one 
jazz is is the same issue right?

I do not have any of the old replies from MS, but I have some of the 
mails I sent them. It looks like we were asking them about when sd.c 
would send a REPORT SUPPORTED OPERATION, the old MS target would return 
the iscsi specific error code. And it looks like they had us try a 
updated version and in there it was changed to just work on their side.

Jazz-jYkeLfz6glqHXe+LvDLADg@public.gmane.org's patch would work around the same problem because in 
sd_read_write_same, sd would see no_write_same is set and not send 
REPORT SUPPORTED OPERATION.

The subject of that email thread with MS was "Linux iSCSI and Microsoft 
target interop question". I started it with MS on Jan 14, 2014. Vaughan 
ccd you on that thread a little later to get your help. I do not have 
the replies though. I am just going by truncated snippets in mails sent, 
so I do not know what version that was fixed in. Do you guys have the 
replies by any chance?

-- 
You received this message because you are subscribed to the Google Groups "open-iscsi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to open-iscsi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To post to this group, send email to open-iscsi-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
Visit this group at http://groups.google.com/group/open-iscsi.
For more options, visit https://groups.google.com/d/optout.

  parent reply	other threads:[~2014-12-03 17:08 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-09 10:20 iSCSI request keep rejected by microsoft iSCSI target because of write_same check vaughan
     [not found] ` <52CE77FB.8020100-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-01-09 18:38   ` Mike Christie
     [not found]     ` <52CEEC97.8050108-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
2014-01-09 22:55       ` The Lee-Man
2014-01-10  1:43     ` Martin K. Petersen
2014-01-10  6:11     ` vaughan
     [not found]       ` <52CF8F0C.3040304-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-01-10  7:41         ` Mike Christie
2014-01-10  8:09           ` vaughan
     [not found]             ` <52CFAA9F.5010706-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-01-10 20:24               ` Mike Christie
2014-01-11  1:22                 ` Vaughan Cao
     [not found]                   ` <52D09CE6.80200-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-12-01  7:25                     ` jazz-jYkeLfz6glqHXe+LvDLADg
     [not found]                       ` <a90377a8-3ef9-4fc2-a3e9-bfff23560674-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>
2014-12-01  9:01                         ` vaughan
     [not found]                           ` <547C2E4D.1030802-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>
2014-12-01 18:37                             ` Michael Christie
2014-12-03  3:09                               ` Martin K. Petersen
     [not found]                                 ` <yq17fy9mnsx.fsf-+q57XtR/GgMb6DWv4sQWN6xOck334EZe@public.gmane.org>
2014-12-03 17:08                                   ` Mike Christie [this message]
     [not found]                                     ` <547F4387.5010207-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
2014-12-03 23:00                                       ` Martin K. Petersen
     [not found]                                         ` <yq1fvcwl4oy.fsf-+q57XtR/GgMb6DWv4sQWN6xOck334EZe@public.gmane.org>
2014-12-03 23:49                                           ` Mike Christie
     [not found]                                             ` <547FA18D.7030706-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
2014-12-04  2:20                                               ` Martin K. Petersen
     [not found]           ` <52CFA440.7030104-hcNo3dDEHLuVc3sceRu5cw@public.gmane.org>
2014-01-10  8:29             ` vaughan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=547F4387.5010207@cs.wisc.edu \
    --to=michaelc-hcno3ddehluvc3sceru5cw@public.gmane.org \
    --cc=jazz-jYkeLfz6glqHXe+LvDLADg@public.gmane.org \
    --cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=martin.petersen-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
    --cc=open-iscsi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.