[U-Boot] Using u-boot with qemu-system-mips(qemu-2.1.2) caused infinite loop

[Daniel Schwierzeck <daniel.schwierzeck@gmail.com>]

Hi,

On 04.12.2014 08:55, jiang wrote:
> Hello all:
> I just downloaded the latest u-boot source code,then compiled with:
> make qemu_mips_defconfig
> make CROSS_COMPILE=mips-linux-uclibc-
> then create image:
> # dd of=flash bs=1k count=4k if=/dev/zero
> # dd of=flash bs=1k conv=notrunc if=u-boot.bin
> 
> run with:
> qemu-system-mips -M mips -pflash flash -nographic
> 
> but I got nothing then I try to debug with gdb,I got this:
> 
> 0xbfc001fc <_start+508>:    nop
> 0xbfc00200 <_start+512>:    b    0xbfc00200 <_start+512>
> 0xbfc00204 <_start+516>:    nop
> 0xbfc00208 <_start+520>:    nop

with recent Qemu versions there occurs a CPU exception in CFI probing

> 
> Another thing, the file u-boot.bin I got was 215k, is that ok?
> 
> What should I do to use u-boot in qemu?:)
> 

if you don't need 64bit support, you should use the malta board for Qemu

$ make malta_defconfig
$ make CROSS_COMPILE=mips-linux-uclibc-
$ qemu-system-mips -M malta -m 256 -nographic -bios u-boot.bin


U-Boot 2015.01-rc2-00163-g97cdf64 (Dec 05 2014 - 15:06:30)

Board: MIPS Malta CoreLV
DRAM:  256 MiB
Flash: 4 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   pcnet#0
Warning: pcnet#0 using MAC address from net device

malta #



-- 
- Daniel