All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laszlo Ersek <lersek@redhat.com>
To: Olivier Martin <olivier.martin@arm.com>
Cc: peter.maydell@linaro.org, drjones@redhat.com,
	edk2-devel@lists.sourceforge.net, qemu-devel@nongnu.org,
	ard.biesheuvel@linaro.org
Subject: Re: [Qemu-devel] [edk2] [edk2 PATCH 01/12] ArmVirtualizationPkg: VirtFdtDxe: forward FwCfg addresses from DTB to PCDs
Date: Fri, 05 Dec 2014 18:39:29 +0100	[thread overview]
Message-ID: <5481EDD1.1030100@redhat.com> (raw)
In-Reply-To: <1417130367-17777-2-git-send-email-lersek@redhat.com>

On 11/28/14 00:19, Laszlo Ersek wrote:
> Qemu's firmware configuration interface consists of two MMIO registers, a
> 16-bit selector and an 8-bit data register. Parse their addresses and
> verify their sizes from the DTB, and expose them to the rest of DXE by
> storing them in dynamic PCDs.
> 
> Contributed-under: TianoCore Contribution Agreement 1.0
> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
> ---
>  ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf |  2 ++
>  ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c   | 26 ++++++++++++++++++++++++++
>  ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationPkg.dec  |  3 +++
>  ArmPlatformPkg/ArmVirtualizationPkg/ArmVirtualizationQemu.dsc |  3 +++
>  4 files changed, 34 insertions(+)
> 
> diff --git a/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf b/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
> index 1c9dd20..daafe6c 100644
> --- a/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
> +++ b/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf
> @@ -47,6 +47,8 @@
>  [Pcd]
>    gArmVirtualizationTokenSpaceGuid.PcdDeviceTreeBaseAddress
>    gArmVirtualizationTokenSpaceGuid.PcdArmPsciMethod
> +  gArmVirtualizationTokenSpaceGuid.PcdFwCfgSelectorAddress
> +  gArmVirtualizationTokenSpaceGuid.PcdFwCfgDataAddress
>    gArmTokenSpaceGuid.PcdGicDistributorBase
>    gArmTokenSpaceGuid.PcdGicInterruptInterfaceBase
>    gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum
> diff --git a/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c b/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c
> index d002e66..f1b5283 100644
> --- a/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c
> +++ b/ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.c
> @@ -44,6 +44,7 @@ typedef enum {
>    PropertyTypeUart,
>    PropertyTypeTimer,
>    PropertyTypePsci,
> +  PropertyTypeFwCfg,
>  } PROPERTY_TYPE;
>  
>  typedef struct {
> @@ -59,6 +60,7 @@ STATIC CONST PROPERTY CompatibleProperties[] = {
>    { PropertyTypeTimer,   "arm,armv7-timer"     },
>    { PropertyTypeTimer,   "arm,armv8-timer"     },
>    { PropertyTypePsci,    "arm,psci-0.2"        },
> +  { PropertyTypeFwCfg,   "fw-cfg,mmio"         },

The part of the DTB that exposes this device was slightly changed. Since
there were no review comments thus far, I'll post a v2 of this edk2 series.

Thanks
Laszlo

  reply	other threads:[~2014-12-05 17:40 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-27 23:17 [Qemu-devel] expose QEMU's fw_cfg boot order to ARM guest firmware (Intel BDS) Laszlo Ersek
2014-11-27 23:18 ` [Qemu-devel] [qemu PATCH 0/2] DTB- and MMIO-based fw_cfg for hw/arm/virt Laszlo Ersek
2014-11-27 23:18   ` [Qemu-devel] [qemu PATCH 1/2] fw_cfg: make the FW_CFG_SIZE and FW_CFG_DATA_SIZE macros public Laszlo Ersek
2014-11-27 23:18   ` [Qemu-devel] [qemu PATCH 2/2] arm: add fw_cfg to "virt" board Laszlo Ersek
2014-11-27 23:28     ` Peter Maydell
2014-11-27 23:34       ` Laszlo Ersek
2014-11-27 23:37         ` Peter Maydell
2014-11-28 10:38     ` Andrew Jones
2014-11-28 10:43       ` Laszlo Ersek
2014-11-28 10:49         ` Laszlo Ersek
2014-11-28 11:17           ` Andrew Jones
2014-11-28 10:51         ` Andrew Jones
2014-11-27 23:19 ` [Qemu-devel] [edk2 PATCH 00/12] consume fw_cfg boot order in ArmVirtualizationQemu Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 01/12] ArmVirtualizationPkg: VirtFdtDxe: forward FwCfg addresses from DTB to PCDs Laszlo Ersek
2014-12-05 17:39     ` Laszlo Ersek [this message]
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 02/12] ArmVirtualizationPkg: introduce QemuFwCfgLib instance for DXE drivers Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 03/12] ArmVirtualizationPkg: clone PlatformIntelBdsLib from ArmPlatformPkg Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 04/12] ArmVirtualizationPkg: PlatformIntelBdsLib: add basic policy Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 05/12] OvmfPkg: extract QemuBootOrderLib Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 06/12] OvmfPkg: QemuBootOrderLib: featurize PCI-like device path translation Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 07/12] OvmfPkg: introduce VIRTIO_MMIO_TRANSPORT_GUID Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 08/12] ArmVirtualizationPkg: VirtFdtDxe: use dedicated VIRTIO_MMIO_TRANSPORT_GUID Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 09/12] OvmfPkg: QemuBootOrderLib: widen ParseUnitAddressHexList() to UINT64 Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 10/12] OvmfPkg: QemuBootOrderLib: OFW-to-UEFI translation for virtio-mmio Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 11/12] ArmVirtualizationPkg: PlatformIntelBdsLib: adhere to QEMU's boot order Laszlo Ersek
2014-11-27 23:19   ` [Qemu-devel] [edk2 PATCH 12/12] ArmVirtualizationPkg: identify "new shell" as builtin shell for Intel BDS Laszlo Ersek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5481EDD1.1030100@redhat.com \
    --to=lersek@redhat.com \
    --cc=ard.biesheuvel@linaro.org \
    --cc=drjones@redhat.com \
    --cc=edk2-devel@lists.sourceforge.net \
    --cc=olivier.martin@arm.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.