All of lore.kernel.org
 help / color / mirror / Atom feed
From: Goffredo Baroncelli <kreijack@inwind.it>
To: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: lists@colorremedies.com, linux-btrfs@vger.kernel.org
Subject: Re: [PATCH] Btrfs: get more accurate output in fd command.
Date: Tue, 09 Dec 2014 19:47:42 +0100	[thread overview]
Message-ID: <548743CE.1020403@inwind.it> (raw)
In-Reply-To: <1418124037-8210-1-git-send-email-yangds.fnst@cn.fujitsu.com>

Hi Dongsheng
On 12/09/2014 12:20 PM, Dongsheng Yang wrote:
> When function btrfs_statfs() calculate the tatol size of fs, it is calculating
> the total size of disks and then dividing it by a factor. But in some usecase,
> the result is not good to user.
> 
> Example:
> 	# mkfs.btrfs -f /dev/vdf1 /dev/vdf2 -d raid1
> 	# mount /dev/vdf1 /mnt
> 	# dd if=/dev/zero of=/mnt/zero bs=1M count=1000
> 	# df -h /mnt
> Filesystem      Size  Used Avail Use% Mounted on
> /dev/vdf1       3.0G 1018M  1.3G  45% /mnt
> 
> 	# btrfs fi show /dev/vdf1
> Label: none  uuid: f85d93dc-81f4-445d-91e5-6a5cd9563294
> 	Total devices 2 FS bytes used 1001.53MiB
> 	devid    1 size 2.00GiB used 1.85GiB path /dev/vdf1
> 	devid    2 size 4.00GiB used 1.83GiB path /dev/vdf2
> 
> a. df -h should report Size as 2GiB rather than as 3GiB.
> Because this is 2 device raid1, the limiting factor is devid 1 @2GiB.

I agree

> b. df -h should report Avail as 0.15GiB or less, rather than as 1.3GiB.
> 2 - 1.85 = 0.15

I cannot agree; the avail should be: 
    1.85           (the capacity of the allocated chunk)
   -1.018          (the file stored)
   +(2-1.85=0.15)  (the residual capacity of the disks
                    considering a raid1 fs)
   ---------------
=   0.97           

> 
> This patch drops the factor at all and calculate the size observable to
> user without considering which raid level the data is in and what's the
> size exactly in disk.
> 
> After this patch applied:
> 	# mkfs.btrfs -f /dev/vdf1 /dev/vdf2 -d raid1
> 	# mount /dev/vdf1 /mnt
> 	# dd if=/dev/zero of=/mnt/zero bs=1M count=1000
> 	# df -h /mnt
> Filesystem      Size  Used Avail Use% Mounted on
> /dev/vdf1       2.0G 1018M  713M  59% /mnt

I am confused: in this example you reported as Avail 713MB, when previous
you stated that the right value should be 150MB...

What happens when the filesystem is RAID5/RAID6 or Linear ?


[...]
-- 
gpg @keyserver.linux.it: Goffredo Baroncelli <kreijackATinwind.it>
Key fingerprint BBF5 1610 0B64 DAC6 5F7D  17B2 0EDA 9B37 8B82 E0B5

  reply	other threads:[~2014-12-09 18:46 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-29  2:19 [bug] df reports wrong Size and Avail on raid1, 3.18rc2 Chris Murphy
2014-10-29  2:26 ` Eric Sandeen
2014-12-09 11:20 ` [PATCH] Btrfs: get more accurate output in fd command Dongsheng Yang
2014-12-09 18:47   ` Goffredo Baroncelli [this message]
2014-12-10  1:08     ` Dongsheng Yang
2014-12-10 10:53       ` Robert White
2014-12-10 13:21         ` Duncan
2014-12-10 15:02           ` Dongsheng Yang
2014-12-10 19:05             ` Goffredo Baroncelli
2014-12-11  8:23               ` Dongsheng Yang
2014-12-11  3:53             ` Duncan
2014-12-11  8:25               ` Dongsheng Yang
2014-12-10 20:36           ` Robert White
2014-12-10 21:03             ` Goffredo Baroncelli
2014-12-10 14:51         ` Dongsheng Yang
2014-12-10 18:25         ` Goffredo Baroncelli
2014-12-11  8:28           ` Dongsheng Yang
2014-12-10 13:59   ` Shriramana Sharma
2014-12-10 14:56     ` Dongsheng Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=548743CE.1020403@inwind.it \
    --to=kreijack@inwind.it \
    --cc=linux-btrfs@vger.kernel.org \
    --cc=lists@colorremedies.com \
    --cc=yangds.fnst@cn.fujitsu.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.