Please, see my comments inline Daiane On Wed, Dec 10, 2014 at 10:44 AM, Subodh Chiwate <subodh.chiwate@ufomoviez.com> wrote:Hi Diane, I am using the source provided by FSL BSP. http://git.freescale.com/git/cgit.cgi/imx/fsl-arm-yocto-bsp.git/tree/README?h=imx-3.10.31-1.1.0_betaThanks, I think that's enough. Please, take a look on this: http://freescale.github.io/doc/release-notes/1.7/index.html#the-differences-between-project-name-and-freescale-release-nameI'm not sure you saw my other question, please see below:I'm sorry. I did not understood the question. I guess you want to play a raw h264 movie (no container) and want to define the FPS previously. Because a raw h264 does not have timing, so you can change it anyway you want/need. But, you have one working cmd-line and one not-working cmd-line. If you have one working cmd-line, what's the problem? (here is where I got confused and need your help) Daianethanks Daiane
-- Regards, Subodh-- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. UFOMoviez India Ltd. has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. UFOMoviez India Ltd. reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the UFOMoviez India Ltd.'s e-mail system. ***************** End of Disclaimer *******************