diff for duplicates of <5488F398.2000605@broadcom.com> diff --git a/a/1.txt b/N1/1.txt index e2671bf..9c355be 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,13 +1,13 @@ On 12/10/2014 2:34 AM, Alexandre Courbot wrote: -> On Tue, Dec 9, 2014 at 5:41 AM, Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote: +> On Tue, Dec 9, 2014 at 5:41 AM, Ray Jui <rjui@broadcom.com> wrote: >> This GPIO driver supports all 3 GPIO controllers in the Broadcom Cygnus >> SoC. The 3 GPIO controllers are 1) the ASIU GPIO controller, 2) the >> chipCommonG GPIO controller, and 3) the ALWAYS-ON GPIO controller >> ->> Signed-off-by: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> ->> Reviewed-by: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> +>> Signed-off-by: Ray Jui <rjui@broadcom.com> +>> Reviewed-by: Scott Branden <sbranden@broadcom.com> >> --- >> drivers/gpio/Kconfig | 11 + >> drivers/gpio/Makefile | 1 + @@ -776,7 +776,3 @@ We do need to use global GPIO numbers, at least before sysfs GPIO interface is updated to use gpiod. I'm fine with using "linux,gpio-base". Btw, I assume that's per GPIO controller based device tree property, correct? --- -To unsubscribe from this list: send the line "unsubscribe devicetree" in -the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 6e60dd6..0d8af6f 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,43 +1,22 @@ - "ref\0rjui@broadcom.com\0" "ref\01418071319-11779-1-git-send-email-rjui@broadcom.com\0" "ref\01418071319-11779-3-git-send-email-rjui@broadcom.com\0" "ref\0CAAVeFuJ875fvEwPbnc-Eewsw4Rp7hLbv7nXWBb=OgvLwhQBVvQ@mail.gmail.com\0" - "ref\0CAAVeFuJ875fvEwPbnc-Eewsw4Rp7hLbv7nXWBb=OgvLwhQBVvQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org\0" - "From\0Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\0" - "Subject\0Re: [PATCH v4 2/5] gpio: Cygnus: add GPIO driver\0" + "From\0rjui@broadcom.com (Ray Jui)\0" + "Subject\0[PATCH v4 2/5] gpio: Cygnus: add GPIO driver\0" "Date\0Wed, 10 Dec 2014 17:30:00 -0800\0" - "To\0Alexandre Courbot <gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" - "Cc\0Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>" - Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> - Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> - Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> - Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> - Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> - Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> - Christian Daudt <bcm-xK7y4jjYLqYh9ZMKESR00Q@public.gmane.org> - Matt Porter <mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> - Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org> - Joe Perches <joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org> - Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org> - Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> - Linux Kernel Mailing List <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> - linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org - " devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "\n" "\n" "On 12/10/2014 2:34 AM, Alexandre Courbot wrote:\n" - "> On Tue, Dec 9, 2014 at 5:41 AM, Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote:\n" + "> On Tue, Dec 9, 2014 at 5:41 AM, Ray Jui <rjui@broadcom.com> wrote:\n" ">> This GPIO driver supports all 3 GPIO controllers in the Broadcom Cygnus\n" ">> SoC. The 3 GPIO controllers are 1) the ASIU GPIO controller, 2) the\n" ">> chipCommonG GPIO controller, and 3) the ALWAYS-ON GPIO controller\n" ">>\n" - ">> Signed-off-by: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\n" - ">> Reviewed-by: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\n" + ">> Signed-off-by: Ray Jui <rjui@broadcom.com>\n" + ">> Reviewed-by: Scott Branden <sbranden@broadcom.com>\n" ">> ---\n" ">> drivers/gpio/Kconfig | 11 +\n" ">> drivers/gpio/Makefile | 1 +\n" @@ -805,10 +784,6 @@ "We do need to use global GPIO numbers, at least before sysfs GPIO \n" "interface is updated to use gpiod. I'm fine with using \n" "\"linux,gpio-base\". Btw, I assume that's per GPIO controller based device \n" - "tree property, correct?\n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" - "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + tree property, correct? -f47e38ad1ac85e5672e1cb1959e19859b19c60e66460c201094726a7a7ad3a70 +1f3fada2f58893c0b8aab2c9acb47840ccf4c44063f50d4d7302517c9d98db4b
diff --git a/a/1.txt b/N2/1.txt index e2671bf..9c355be 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -1,13 +1,13 @@ On 12/10/2014 2:34 AM, Alexandre Courbot wrote: -> On Tue, Dec 9, 2014 at 5:41 AM, Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote: +> On Tue, Dec 9, 2014 at 5:41 AM, Ray Jui <rjui@broadcom.com> wrote: >> This GPIO driver supports all 3 GPIO controllers in the Broadcom Cygnus >> SoC. The 3 GPIO controllers are 1) the ASIU GPIO controller, 2) the >> chipCommonG GPIO controller, and 3) the ALWAYS-ON GPIO controller >> ->> Signed-off-by: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> ->> Reviewed-by: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> +>> Signed-off-by: Ray Jui <rjui@broadcom.com> +>> Reviewed-by: Scott Branden <sbranden@broadcom.com> >> --- >> drivers/gpio/Kconfig | 11 + >> drivers/gpio/Makefile | 1 + @@ -776,7 +776,3 @@ We do need to use global GPIO numbers, at least before sysfs GPIO interface is updated to use gpiod. I'm fine with using "linux,gpio-base". Btw, I assume that's per GPIO controller based device tree property, correct? --- -To unsubscribe from this list: send the line "unsubscribe devicetree" in -the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N2/content_digest index 6e60dd6..dae2538 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,43 +1,41 @@ - "ref\0rjui@broadcom.com\0" "ref\01418071319-11779-1-git-send-email-rjui@broadcom.com\0" "ref\01418071319-11779-3-git-send-email-rjui@broadcom.com\0" "ref\0CAAVeFuJ875fvEwPbnc-Eewsw4Rp7hLbv7nXWBb=OgvLwhQBVvQ@mail.gmail.com\0" - "ref\0CAAVeFuJ875fvEwPbnc-Eewsw4Rp7hLbv7nXWBb=OgvLwhQBVvQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org\0" - "From\0Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\0" + "From\0Ray Jui <rjui@broadcom.com>\0" "Subject\0Re: [PATCH v4 2/5] gpio: Cygnus: add GPIO driver\0" "Date\0Wed, 10 Dec 2014 17:30:00 -0800\0" - "To\0Alexandre Courbot <gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" - "Cc\0Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>" - Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org> - Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> - Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org> - Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org> - Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> - Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> - Christian Daudt <bcm-xK7y4jjYLqYh9ZMKESR00Q@public.gmane.org> - Matt Porter <mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> - Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> - Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org> - Joe Perches <joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org> - Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org> - Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> - Linux Kernel Mailing List <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> - linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> - bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org - " devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>\0" + "To\0Alexandre Courbot <gnurou@gmail.com>\0" + "Cc\0Rob Herring <robh+dt@kernel.org>" + Pawel Moll <pawel.moll@arm.com> + Mark Rutland <mark.rutland@arm.com> + Ian Campbell <ijc+devicetree@hellion.org.uk> + Kumar Gala <galak@codeaurora.org> + Linus Walleij <linus.walleij@linaro.org> + Grant Likely <grant.likely@linaro.org> + Christian Daudt <bcm@fixthebug.org> + Matt Porter <mporter@linaro.org> + Florian Fainelli <f.fainelli@gmail.com> + Russell King <linux@arm.linux.org.uk> + Joe Perches <joe@perches.com> + Arnd Bergmann <arnd@arndb.de> + Scott Branden <sbranden@broadcom.com> + Linux Kernel Mailing List <linux-kernel@vger.kernel.org> + linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org> + linux-gpio@vger.kernel.org <linux-gpio@vger.kernel.org> + <bcm-kernel-feedback-list@broadcom.com> + " devicetree@vger.kernel.org <devicetree@vger.kernel.org>\0" "\00:1\0" "b\0" "\n" "\n" "On 12/10/2014 2:34 AM, Alexandre Courbot wrote:\n" - "> On Tue, Dec 9, 2014 at 5:41 AM, Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote:\n" + "> On Tue, Dec 9, 2014 at 5:41 AM, Ray Jui <rjui@broadcom.com> wrote:\n" ">> This GPIO driver supports all 3 GPIO controllers in the Broadcom Cygnus\n" ">> SoC. The 3 GPIO controllers are 1) the ASIU GPIO controller, 2) the\n" ">> chipCommonG GPIO controller, and 3) the ALWAYS-ON GPIO controller\n" ">>\n" - ">> Signed-off-by: Ray Jui <rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\n" - ">> Reviewed-by: Scott Branden <sbranden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>\n" + ">> Signed-off-by: Ray Jui <rjui@broadcom.com>\n" + ">> Reviewed-by: Scott Branden <sbranden@broadcom.com>\n" ">> ---\n" ">> drivers/gpio/Kconfig | 11 +\n" ">> drivers/gpio/Makefile | 1 +\n" @@ -805,10 +803,6 @@ "We do need to use global GPIO numbers, at least before sysfs GPIO \n" "interface is updated to use gpiod. I'm fine with using \n" "\"linux,gpio-base\". Btw, I assume that's per GPIO controller based device \n" - "tree property, correct?\n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" - "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + tree property, correct? -f47e38ad1ac85e5672e1cb1959e19859b19c60e66460c201094726a7a7ad3a70 +f8a0e030e42e68a92a3fec4220ff40ea4ffc277933a71db3389816435dd3c7da
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.