From: Mike Looijmans <mike.looijmans@topic.nl>
To: Guenter Roeck <linux@roeck-us.net>
Cc: <wim@iguana.be>, <linux-watchdog@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3] gpio_wdt: Add "always_running" feature to GPIO watchdog
Date: Thu, 11 Dec 2014 08:04:36 +0100 [thread overview]
Message-ID: <54894204.4070104@topic.nl> (raw)
In-Reply-To: <1416562828-3978-1-git-send-email-mike.looijmans@topic.nl>
Is this v3 patch okay or are you waiting for additional changes?
Kind regards,
Mike.
On 11/21/2014 10:40 AM, Mike Looijmans wrote:
> On some chips, like the TPS386000, the trigger cannot be disabled
> and the CPU must keep toggling the line at all times. Add a switch
> "always_running" to keep toggling the GPIO line regardless of the
> state of the soft part of the watchdog. The "armed" member keeps
> track of whether a timeout must also cause a reset.
>
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> ---
> v3: Indentation adjusted to match
> Fix error path in probe when notification registration fails
> Prevent double assignment of "armed" variable
>
> .../devicetree/bindings/watchdog/gpio-wdt.txt | 5 +++
> drivers/watchdog/gpio_wdt.c | 39 ++++++++++++++++----
> 2 files changed, 36 insertions(+), 8 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
> index 37afec1..1987949 100644
> --- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
> @@ -13,6 +13,11 @@ Required Properties:
> by the GPIO flags.
> - hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds).
>
> +Optional Properties:
> +- always-running: If the watchdog timer cannot be disabled, add this flag to
> + have the driver keep toggling the signal without a client. It will only cease
> + to toggle the signal when the device is open and the timeout elapsed.
> +
> Example:
> watchdog: watchdog {
> /* ADM706 */
> diff --git a/drivers/watchdog/gpio_wdt.c b/drivers/watchdog/gpio_wdt.c
> index 220a9e0..9bfbd73 100644
> --- a/drivers/watchdog/gpio_wdt.c
> +++ b/drivers/watchdog/gpio_wdt.c
> @@ -31,6 +31,8 @@ struct gpio_wdt_priv {
> int gpio;
> bool active_low;
> bool state;
> + bool always_running;
> + bool armed;
> unsigned int hw_algo;
> unsigned int hw_margin;
> unsigned long last_jiffies;
> @@ -48,10 +50,8 @@ static void gpio_wdt_disable(struct gpio_wdt_priv *priv)
> gpio_direction_input(priv->gpio);
> }
>
> -static int gpio_wdt_start(struct watchdog_device *wdd)
> +static void gpio_wdt_start_impl(struct gpio_wdt_priv *priv)
> {
> - struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
> -
> priv->state = priv->active_low;
> gpio_direction_output(priv->gpio, priv->state);
> priv->last_jiffies = jiffies;
> @@ -60,12 +60,25 @@ static int gpio_wdt_start(struct watchdog_device *wdd)
> return 0;
> }
>
> +static int gpio_wdt_start(struct watchdog_device *wdd)
> +{
> + struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
> +
> + gpio_wdt_start_impl(priv);
> + priv->armed = true;
> +
> + return 0;
> +}
> +
> static int gpio_wdt_stop(struct watchdog_device *wdd)
> {
> struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
>
> - mod_timer(&priv->timer, 0);
> - gpio_wdt_disable(priv);
> + priv->armed = false;
> + if (!priv->always_running) {
> + mod_timer(&priv->timer, 0);
> + gpio_wdt_disable(priv);
> + }
>
> return 0;
> }
> @@ -91,8 +104,8 @@ static void gpio_wdt_hwping(unsigned long data)
> struct watchdog_device *wdd = (struct watchdog_device *)data;
> struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
>
> - if (time_after(jiffies, priv->last_jiffies +
> - msecs_to_jiffies(wdd->timeout * 1000))) {
> + if (priv->armed && time_after(jiffies, priv->last_jiffies +
> + msecs_to_jiffies(wdd->timeout * 1000))) {
> dev_crit(wdd->dev, "Timer expired. System will reboot soon!\n");
> return;
> }
> @@ -197,6 +210,9 @@ static int gpio_wdt_probe(struct platform_device *pdev)
> /* Use safe value (1/2 of real timeout) */
> priv->hw_margin = msecs_to_jiffies(hw_margin / 2);
>
> + priv->always_running = of_property_read_bool(pdev->dev.of_node,
> + "always-running");
> +
> watchdog_set_drvdata(&priv->wdd, priv);
>
> priv->wdd.info = &gpio_wdt_ident;
> @@ -216,8 +232,15 @@ static int gpio_wdt_probe(struct platform_device *pdev)
> priv->notifier.notifier_call = gpio_wdt_notify_sys;
> ret = register_reboot_notifier(&priv->notifier);
> if (ret)
> - watchdog_unregister_device(&priv->wdd);
> + goto error_unregister;
>
> + if (priv->always_running)
> + gpio_wdt_start_impl(priv);
> +
> + return 0;
> +
> +error_unregister:
> + watchdog_unregister_device(&priv->wdd);
> return ret;
> }
>
>
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) (0) 499 33 69 79
Telefax: (+31) (0) 499 33 69 70
E-mail: mike.looijmans@topic.nl
Website: www.topic.nl
Please consider the environment before printing this e-mail
Topic zoekt gedreven (embedded) software specialisten!
http://topic.nl/vacatures/topic-zoekt-software-engineers/
next prev parent reply other threads:[~2014-12-11 7:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-20 13:16 [PATCH] gpio_wdt: Add "always_running" feature to GPIO watchdog Mike Looijmans
2014-11-20 17:23 ` Guenter Roeck
2014-11-21 6:53 ` [PATCH v2] " Mike Looijmans
2014-11-21 7:28 ` Guenter Roeck
2014-11-21 7:51 ` Mike Looijmans
2014-11-21 9:40 ` [PATCH v3] " Mike Looijmans
2014-12-11 7:04 ` Mike Looijmans [this message]
2015-01-13 21:06 ` [v3] " Guenter Roeck
2015-01-13 21:52 ` Guenter Roeck
2015-01-14 6:28 ` [PATCH v4] " Mike Looijmans
2015-01-16 5:01 ` Guenter Roeck
2015-02-03 12:54 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54894204.4070104@topic.nl \
--to=mike.looijmans@topic.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.