From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull u-boot-fsl-qoriq.git master
Date: Thu, 11 Dec 2014 10:52:00 -0800 [thread overview]
Message-ID: <5489E7D0.7090108@freescale.com> (raw)
Tom,
The following changes since commit 32fdf0e4d82bdca5d64d86330e461e59685f9959:
Prepare v2015.01-rc3 (2014-12-08 16:35:08 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-fsl-qoriq.git master
for you to fetch changes up to 0de15707a71ec64dbc1ead2831457f1550179ea7:
kconfig: ls102xa: Change the prompt messages (2014-12-11 09:42:41 -0800)
----------------------------------------------------------------
Alison Wang (12):
ls102xa: pblimage: Add pblimage tool support for LS102xA
spl: Use u-boot.img instead of u-boot.bin
arm: spl: Add I2C linker list in generic .lds
kconfig: ls1021a: add SUPPORT_SPL
ls102xa: qixis: Add CONFIG_QIXIS_I2C_ACCESS macro
arm: ls102xa: Add SD boot support for LS1021AQDS board
arm: ls102xa: Add SD boot support for LS1021ATWR board
arm: ls1021a: Add CONFIG_DOS_PARTITION and CONFIG_CMD_FAT support
arm: ls102xa: Fix SD/NAND/QSPI boot defination error for QE support
arm: ls102xa: Add QSPI boot support for LS1021AQDS/TWR board
arm: ls102xa: Add NAND boot support for LS1021AQDS board
kconfig: ls102xa: Change the prompt messages
Chenhui Zhao (1):
ls1021aqds: set the default I2C channel before DDR init
Jaiprakash Singh (1):
driver/mtd: Fix IFC compilation warnings
Minghuan Lian (1):
arm: ls102xa: Update PCIe dts node status
Nikhil Badola (3):
drivers: usb: Make usb device-tree fixup code architecture independent
drivers: usb: fsl: Add USB device-tree errata framework
drivers: usb: fsl: Check USB Erratum A007792 applicability
Tang Yuantian (2):
arm: ls102xa: fixed a bus frequency setting error
fsl/sleep: updated the deep sleep framework for QorIQ platforms
Xiubo Li (6):
ARM: HYP/non-sec: add the pen address BE mode support.
ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.
ls1021a: adding a secondary core boot address and kick functions
ls102xa: changing a few targets' configurations.
ARM: ls102xa: allow all the peripheral access permission as R/W.
ARM: ls102xa: Setting device's stream id for SMMUs.
Yao Yuan (1):
ls1021aqds: add hwconfig setting to do pin mux
chenhui zhao (1):
arm: ls102xa: clear EPU registers for deep sleep
Makefile | 11 +-
arch/arm/Kconfig | 6 +-
arch/arm/cpu/armv7/ls102xa/Makefile | 2 +
arch/arm/cpu/armv7/ls102xa/cpu.c | 34 +++
arch/arm/cpu/armv7/ls102xa/fdt.c | 2 +-
arch/arm/cpu/armv7/ls102xa/fsl_epu.c | 57 ++++
arch/arm/cpu/armv7/ls102xa/fsl_epu.h | 68 +++++
arch/arm/cpu/armv7/ls102xa/spl.c | 33 +++
arch/arm/cpu/armv7/nonsec_virt.S | 7 +-
arch/arm/cpu/u-boot-spl.lds | 3 +
arch/arm/include/asm/arch-ls102xa/config.h | 9 +
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 9 +
.../include/asm/arch-ls102xa/ls102xa_stream_id.h | 17 ++
arch/arm/include/asm/arch-ls102xa/ns_access.h | 118 ++++++++
arch/arm/include/asm/arch-ls102xa/spl.h | 20 ++
arch/arm/include/asm/pcie_layerscape.h | 13 +
arch/powerpc/cpu/mpc8xxx/fdt.c | 104 -------
board/freescale/common/Makefile | 10 +
board/freescale/common/arm_sleep.c | 95 +++++++
board/freescale/common/ls102xa_stream_id.c | 18 ++
board/freescale/common/mpc85xx_sleep.c | 88 ++++++
board/freescale/common/ns_access.c | 30 +++
board/freescale/common/qixis.h | 7 +
board/freescale/common/sleep.h | 21 ++
board/freescale/ls1021aqds/MAINTAINERS | 3 +
board/freescale/ls1021aqds/ddr.c | 5 +-
board/freescale/ls1021aqds/ls1021aqds.c | 283 ++++++++++++++++++--
board/freescale/ls1021aqds/ls102xa_pbi.cfg | 12 +
board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg | 7 +
board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg | 14 +
board/freescale/ls1021atwr/MAINTAINERS | 2 +
board/freescale/ls1021atwr/ls1021atwr.c | 151 +++++++++++
board/freescale/ls1021atwr/ls102xa_pbi.cfg | 12 +
board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg | 14 +
configs/ls1021aqds_nand_defconfig | 4 +
configs/ls1021aqds_qspi_defconfig | 3 +
configs/ls1021aqds_sdcard_defconfig | 4 +
configs/ls1021atwr_qspi_defconfig | 3 +
configs/ls1021atwr_sdcard_defconfig | 4 +
drivers/ddr/fsl/arm_ddr_gen3.c | 45 +++-
drivers/ddr/fsl/fsl_ddr_gen4.c | 44 ++-
drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 67 ++---
drivers/mtd/nand/fsl_ifc_nand.c | 2 +-
drivers/mtd/nand/fsl_ifc_spl.c | 10 +
drivers/pci/Makefile | 1 +
drivers/pci/pcie_layerscape.c | 51 ++++
drivers/usb/host/ehci-fsl.c | 186 +++++++++++++
include/configs/ls1021aqds.h | 175 +++++++++++-
include/configs/ls1021atwr.h | 95 ++++++-
include/configs/sun7i.h | 1 +
include/fsl_ddr_sdram.h | 12 +-
include/fsl_usb.h | 23 ++
tools/pblimage.c | 110 +++++---
53 files changed, 1904 insertions(+), 221 deletions(-)
create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_epu.c
create mode 100644 arch/arm/cpu/armv7/ls102xa/fsl_epu.h
create mode 100644 arch/arm/cpu/armv7/ls102xa/spl.c
create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/ns_access.h
create mode 100644 arch/arm/include/asm/arch-ls102xa/spl.h
create mode 100644 arch/arm/include/asm/pcie_layerscape.h
create mode 100644 board/freescale/common/arm_sleep.c
create mode 100644 board/freescale/common/ls102xa_stream_id.c
create mode 100644 board/freescale/common/mpc85xx_sleep.c
create mode 100644 board/freescale/common/ns_access.c
create mode 100644 board/freescale/common/sleep.h
create mode 100644 board/freescale/ls1021aqds/ls102xa_pbi.cfg
create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
create mode 100644 board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
create mode 100644 board/freescale/ls1021atwr/ls102xa_pbi.cfg
create mode 100644 board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
create mode 100644 configs/ls1021aqds_nand_defconfig
create mode 100644 configs/ls1021aqds_qspi_defconfig
create mode 100644 configs/ls1021aqds_sdcard_defconfig
create mode 100644 configs/ls1021atwr_qspi_defconfig
create mode 100644 configs/ls1021atwr_sdcard_defconfig
create mode 100644 drivers/pci/pcie_layerscape.c
Thanks.
York
next reply other threads:[~2014-12-11 18:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-11 18:52 York Sun [this message]
2014-12-11 19:15 ` [U-Boot] Please pull u-boot-fsl-qoriq.git master York Sun
-- strict thread matches above, loose matches on Subject: below --
2014-12-11 20:41 York Sun
2014-12-12 1:33 ` Tom Rini
2016-01-27 17:30 york sun
2016-01-28 23:18 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5489E7D0.7090108@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.