From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Thu, 18 Dec 2014 14:05:43 +0000 Subject: Re: [lm-sensors] System Monitor cannot read sensors anymore Message-Id: <5492DF37.4040100@roeck-us.net> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On 12/18/2014 04:29 AM, Richard Llom wrote: > Jean Delvare wrote: >> On Thu, 11 Dec 2014 16:06:02 +0100, Richard Llom wrote: >>> Jean Delvare wrote: >>>> No service is doing that. The information is available in sysfs, and >>>> libsensors gets it from there and makes it available to applications in >>>> an easy way. >>> >>> Where exactly in /sys ? Because here I can't find anything there related >>> to my sensors... >> >> In /sys/class/hwmon. >> > Hmm, but didn't you wrote earlier that k10temp and it87 are not (yet) > converted? > > This is my directory listing from [hwmon]$ ls -Rl > .: > total 0 > lrwxrwxrwx 1 root root 0 18.12.2014 09:23 hwmon0 -> > ../../devices/pci0000:00/0000:00:02.0/0000:01:00.0/hwmon/hwmon0/ > lrwxrwxrwx 1 root root 0 18.12.2014 09:23 hwmon1 -> > ../../devices/pci0000:00/0000:00:18.3/hwmon/hwmon1/ > lrwxrwxrwx 1 root root 0 18.12.2014 09:23 hwmon2 -> > ../../devices/platform/it87.552/hwmon/hwmon2/ > > should there be a directory lmsensors? > No. Look in /sys/class/hwmon/hwmonX/device. Guenter >>>> (...) >>>> Can you run ksysguard from a terminal and see if it's >>>> spitting any error message (or logging them somewhere maybe?) >>> >>> This is the output from the terminal >>> ksysguard(3168) KSGRD::SensorAgent::processAnswer: Received UNKNOWN >>> COMMAND >>> for: "lmsensors/k10temp-pci-00c3/temp1?" >>> ksysguard(3168) KSGRD::SensorAgent::processAnswer: Received UNKNOWN >>> COMMAND >>> for: "lmsensors/it8720-isa-0228/temp1?" >>> ksysguard(3168) KSGRD::SensorAgent::processAnswer: Received UNKNOWN >>> COMMAND >>> for: "lmsensors/nouveau-pci-0100/temp1?" >>> ksysguard(3168) KSGRD::SensorAgent::processAnswer: Received UNKNOWN >>> COMMAND >>> for: "lmsensors/it8720-isa-0228/fan1?" >>> ksysguard(3168) KSGRD::SensorAgent::processAnswer: Received UNKNOWN >>> COMMAND >>> for: "lmsensors/it8720-isa-0228/fan2?" >> >> This should be reported to the maintainers of ksysguardd, this is an >> application error after all. >> > Or ksysguard actually doesn't use libsensors at all and is looking for the > information in the wrong place? > > > _______________________________________________ > lm-sensors mailing list > lm-sensors@lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors > _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors