From: Guenter Roeck <linux@roeck-us.net>
To: "Pali Rohár" <pali.rohar@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-kernel@vger.kernel.org, Valdis.Kletnieks@vt.edu,
Steven Honeyman <stevenhoneyman@gmail.com>,
Jean Delvare <jdelvare@suse.de>,
Gabriele Mazzotta <gabriele.mzt@gmail.com>,
Jochen Eisinger <jochen@penguin-breeder.org>
Subject: Re: [PATCH v4] i8k: Autodetect maximal fan speed and fan RPM multiplier
Date: Sun, 21 Dec 2014 10:51:19 -0800 [thread overview]
Message-ID: <549716A7.2040207@roeck-us.net> (raw)
In-Reply-To: <201412211940.06980@pali>
On 12/21/2014 10:40 AM, Pali Rohár wrote:
> On Sunday 21 December 2014 19:27:34 Guenter Roeck wrote:
>> On 12/21/2014 09:23 AM, Pali Rohár wrote:
>>> This patch adds new function i8k_get_fan_nominal_speed() for
>>> doing SMM call which will return nominal fan RPM for
>>> specified fan speed. It returns nominal RPM value at which
>>> fan operate when speed (0, 1, 2, 3) is set. It looks like
>>> RPM value is not accurate, but still provides very useful
>>> information.
>>>
>>> First it can be used to validate if certain fan speed could
>>> be accepted by SMM for setting fan speed and we can use
>>> this routine to detect maximal fan speed.
>>>
>>> Second it returns RPM value, so we can check if value looks
>>> correct with multiplier 30 or multiplier 1 (until now only
>>> these two multiplier were used). If RPM value with
>>> multiplier 30 is too high, then multiplier 1 is used.
>>>
>>> In case when SMM reports that new function is not supported
>>> we will fallback to old hardcoded values. Maximal fan speed
>>> would be 2 and RPM multiplier 30.
>>>
>>> Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
>>> Tested-by: Pali Rohár <pali.rohar@gmail.com>
>>
>> Tested-by the submitter is kind of implied.
>>
>> Anyway, this patch does not apply to 3.19-rc1, nor to 3.18.
>> What is your baseline ? Can you rebase to 3.19-rc1 ?
>> Or do I need to apply some other patch first ?
>>
>> Thanks,
>> Guenter
>
> You need to apply these old patches:
> i8k: Add support for temperature sensor labels
> i8k: Register only temperature sensors which have labels
> i8k: Return -ENODATA for invalid temperature
> i8k: Rework error retries
>
I think it would make sense to re-send the entire series at this
point (including my patch and all Reviewed-by: tags). Problem is
that not all patches have a version number (for example there
are multiple versions of the label patch, but the version
I reviewed does not have version information). This makes it
very difficult to find the correct (reviewed) version, and I
suspect that Greg may neither have the time nor the desire
to do it.
Thanks,
Guenter
next prev parent reply other threads:[~2014-12-21 18:52 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-09 20:06 [PATCH 0/3] i8k: Rework fan_mult and fan_max code Pali Rohár
2014-12-09 20:06 ` [PATCH 1/3] i8k: cosmetic: distinguish between fan speed and fan rpm Pali Rohár
2014-12-09 20:23 ` Guenter Roeck
2014-12-09 20:39 ` Pali Rohár
2014-12-09 22:49 ` Guenter Roeck
2014-12-09 20:07 ` [PATCH 2/3] i8k: Autodetect maximal fan speed and fan RPM multiplier Pali Rohár
2014-12-09 20:20 ` Guenter Roeck
2014-12-09 20:23 ` Pali Rohár
2014-12-09 22:42 ` Guenter Roeck
2014-12-10 11:50 ` Pali Rohár
2014-12-10 14:08 ` Guenter Roeck
2014-12-18 11:13 ` Pali Rohár
2014-12-19 18:33 ` Guenter Roeck
2014-12-09 20:07 ` [PATCH 3/3] i8k: Remove laptop specific config data (fan_mult, fan_max) from driver Pali Rohár
2014-12-10 11:51 ` Pali Rohár
2014-12-10 13:32 ` Gabriele Mazzotta
2014-12-18 11:08 ` Pali Rohár
2014-12-18 15:08 ` Valdis.Kletnieks
2014-12-18 16:34 ` Pali Rohár
2014-12-18 16:44 ` Valdis.Kletnieks
2014-12-25 21:54 ` Gabriele Mazzotta
2014-12-27 14:13 ` Gabriele Mazzotta
2014-12-28 8:22 ` Pali Rohár
2014-12-28 8:28 ` Guenter Roeck
2014-12-28 8:46 ` Pali Rohár
2014-12-28 15:25 ` Gabriele Mazzotta
2014-12-28 15:48 ` Pali Rohár
2014-12-28 16:02 ` Gabriele Mazzotta
2014-12-28 16:07 ` Pali Rohár
2014-12-28 16:17 ` Gabriele Mazzotta
2014-12-29 12:22 ` Pali Rohár
2014-12-29 12:50 ` Gabriele Mazzotta
2014-12-30 7:35 ` Guenter Roeck
2014-12-17 17:54 ` Pali Rohár
2014-12-17 18:20 ` Steven Honeyman
2014-12-18 9:02 ` Valdis.Kletnieks
2014-12-18 11:11 ` Pali Rohár
2014-12-10 13:41 ` Gabriele Mazzotta
2014-12-19 18:04 ` [PATCH v2 1/2] i8k: Autodetect maximal fan speed and fan RPM multiplier Pali Rohár
2014-12-19 18:32 ` Guenter Roeck
2014-12-19 18:51 ` Pali Rohár
2014-12-19 19:28 ` Guenter Roeck
2014-12-20 8:57 ` Pali Rohár
2014-12-20 12:04 ` Guenter Roeck
2014-12-20 12:18 ` Pali Rohár
2014-12-20 12:44 ` Guenter Roeck
2014-12-20 12:54 ` Pali Rohár
2014-12-20 17:20 ` Guenter Roeck
2014-12-20 17:27 ` Steven Honeyman
2014-12-20 18:07 ` Guenter Roeck
2014-12-21 9:06 ` Pali Rohár
2014-12-20 18:38 ` Guenter Roeck
2014-12-21 9:13 ` Pali Rohár
2014-12-21 11:47 ` Guenter Roeck
2014-12-20 19:02 ` Guenter Roeck
2014-12-21 9:15 ` Pali Rohár
2014-12-21 9:20 ` [PATCH v3] " Pali Rohár
2014-12-21 11:57 ` Guenter Roeck
2014-12-21 12:09 ` Pali Rohár
2014-12-21 12:23 ` Guenter Roeck
2014-12-21 16:37 ` Pali Rohár
2014-12-21 16:55 ` Steven Honeyman
2014-12-21 17:25 ` Pali Rohár
2014-12-21 17:23 ` [PATCH v4] " Pali Rohár
2014-12-21 18:27 ` Guenter Roeck
2014-12-21 18:40 ` Pali Rohár
2014-12-21 18:51 ` Guenter Roeck [this message]
2014-12-21 19:56 ` Pali Rohár
2014-12-21 19:51 ` Guenter Roeck
2014-12-22 15:07 ` Pali Rohár
2014-12-23 13:52 ` Guenter Roeck
2014-12-23 19:11 ` Pali Rohár
2014-12-19 18:04 ` [PATCH v2 2/2] i8k: Remove DMI config data for Latitude E6x40 Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=549716A7.2040207@roeck-us.net \
--to=linux@roeck-us.net \
--cc=Valdis.Kletnieks@vt.edu \
--cc=arnd@arndb.de \
--cc=gabriele.mzt@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jdelvare@suse.de \
--cc=jochen@penguin-breeder.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pali.rohar@gmail.com \
--cc=stevenhoneyman@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.