All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miguel Barrio Orsikowsky <megamik@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: PROBLEM: 0489:e062 [Sony VAIO SVF1531C5E] Bluetooth adapter does not see BT devices
Date: Wed, 31 Dec 2014 12:25:15 +0100	[thread overview]
Message-ID: <54A3DD1B.4040100@gmail.com> (raw)
In-Reply-To: <FB8B7DF3-D835-4270-8932-BAED0DA050BE@holtmann.org>

El 30/12/14 a las 20:09, Marcel Holtmann escribió:
> Hi Miguel,
>
>> [1.] One line summary of the problem:
>>
>> 0489:e062 [Sony VAIO SVF1531C5E] Bluetooth adapter does not see BT devices
>>
>> [2.] Full description of the problem/report:
>>
>> The Bluetooth adapter is detected and apparently working but, when executing "hcitool scan", the device list is always empty: it cannot see any BT device around.
>>
>> But, if I boot into Windows just before booting into Linux, the adapter works perfectly and it sees all BT devices. It seems Windows driver is performing some activation to the BT adapter.
>>
>> Test case:
>> Step 1: power on the Sony VAIO SVF1531C5E and boot into Linux.
>> Step 2: while having around one or more devices with BT enabled and visible, type "hcitool scan" and wait for a few seconds just to see that nothing gets listed.
>> Step 4: reboot the laptop and boot into a Windows partition (mine is Windows 8.1 x64).
>> Step 5: wait until it is completely booted, then just reboot into Linux again.
>> Step 6: while having around one or more devices with BT enabled and visible, type "hcitool scan" and wait for a few seconds just to see all of your devices correctly listed this time. You will be able to pair and use them later without any issue.
>>
>> [3.] Keywords (i.e., modules, networking, kernel):
>>
>> [4.] Kernel version (from /proc/version):
>>
>> Linux version 3.19.0-031900rc2-generic (apw@tangerine) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201412290135 SMP Mon Dec 29 01:36:54 UTC 2014
> just include the content of /sys/kernel/debug/usb/devices for this adapter. I assume it is connected via USB.

Yes, it is integrated and connected via USB:

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e062 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM43142A0
S:  SerialNumber=3C77E6DC7494
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Regards,
Miguel.

  reply	other threads:[~2014-12-31 11:25 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-30 16:30 PROBLEM: 0489:e062 [Sony VAIO SVF1531C5E] Bluetooth adapter does not see BT devices Miguel Barrio Orsikowsky
2014-12-30 19:09 ` Marcel Holtmann
2014-12-31 11:25   ` Miguel Barrio Orsikowsky [this message]
2014-12-31 11:31     ` Marcel Holtmann
2014-12-31 12:54       ` Miguel Barrio Orsikowsky
2014-12-31 22:51         ` Marcel Holtmann
2015-01-01 13:40           ` Miguel Barrio Orsikowsky
2015-01-01 19:47             ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54A3DD1B.4040100@gmail.com \
    --to=megamik@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=marcel@holtmann.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.