From: "Peter Kümmel" <syntheticpp@gmx.net>
To: linux-omap@vger.kernel.org
Subject: 3.18.1->3.19-rc2: In-band Error seen by MPU
Date: Thu, 01 Jan 2015 19:12:51 +0100 [thread overview]
Message-ID: <54A58E23.5080103@gmx.net> (raw)
When updating (custom DM3730 board) from 3.18.1 ro 3.19-rc2 I see a "In-band ERROR" warning which wasn't present in 3.18.1.
Could it be that I missed some DT updates?
And should I care of "irq: no irq domain found for /ocp/pinmux@48002030"?
Many thanks!
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/166/600 MHz
[ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 65536000000000ns
[ 0.000030] OMAP clocksource: 32k_counter at 32768 Hz
[ 0.000183] Console: colour dummy device 80x30
[ 0.000244] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[ 0.118988] pid_max: default: 32768 minimum: 301
[ 0.119140] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.119171] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.119934] CPU: Testing write buffer coherency: ok
[ 0.120330] Setting up static identity map for 0x803d5b28 - 0x803d5b80
[ 0.121856] devtmpfs: initialized
[ 0.122680] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.138458] omap_hwmod: mcbsp2_sidetone using broken dt data from mcbsp
[ 0.138977] omap_hwmod: mcbsp3_sidetone using broken dt data from mcbsp
[ 0.182159] omap_hwmod: mcbsp2: cannot be enabled for reset (3)
[ 0.228424] pinctrl core: initialized pinctrl subsystem
[ 0.259399] NET: Registered protocol family 16
[ 0.260131] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.288696] cpuidle: using governor ladder
[ 0.318572] cpuidle: using governor menu
[ 0.324981] Reprogramming SDRC clock to 166000000 Hz
[ 0.333160] OMAP GPIO hardware version 2.5
[ 0.340515] irq: no irq domain found for /ocp/pinmux@48002030 !
[ 0.356994] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
[ 0.360015] platform 48058000.ssi-controller: Cannot lookup hwmod 'ssi'
[ 0.366882] In-band Error seen by MPU at address 0
[ 0.366912] ------------[ cut here ]------------
[ 0.366943] WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_smx.c:166 omap3_l3_app_irq+0x100/0x134()
[ 0.366943] Modules linked in:
[ 0.366973] CPU: 0 PID: 1 Comm: swapper Not tainted 3.19.0-rc2-DM+ #2
[ 0.366973] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 0.367004] Backtrace:
[ 0.367034] [<c00117a4>] (dump_backtrace) from [<c00119c8>] (show_stack+0x18/0x1c)
[ 0.367034] r6:c0213e50 r5:00000009 r4:00000000 r3:00000000
[ 0.367065] [<c00119b0>] (show_stack) from [<c03cf9c8>] (dump_stack+0x24/0x28)
[ 0.367095] [<c03cf9a4>] (dump_stack) from [<c002f688>] (warn_slowpath_common+0x8c/0xb8)
[ 0.367126] [<c002f5fc>] (warn_slowpath_common) from [<c002f758>] (warn_slowpath_null+0x24/0x2c)
[ 0.367126] r8:00000000 r7:00000000 r6:04001b00 r5:00000000 r4:f8001400
[ 0.367156] [<c002f734>] (warn_slowpath_null) from [<c0213e50>] (omap3_l3_app_irq+0x100/0x134)
[ 0.367187] [<c0213d50>] (omap3_l3_app_irq) from [<c005b50c>] (handle_irq_event_percpu+0x80/0x148)
[ 0.367218] r9:c3953e00 r8:00000013 r7:00000000 r6:00000000 r5:c39581c0 r4:c39581c0
[ 0.367248] [<c005b48c>] (handle_irq_event_percpu) from [<c005b63c>] (handle_irq_event+0x68/0x90)
[ 0.367248] r10:c3856000 r9:80000000 r8:c3803200 r7:00000001 r6:00000000 r5:c39581c0
[ 0.367279] r4:c3953e00
[ 0.367279] [<c005b5d4>] (handle_irq_event) from [<c005dfd0>] (handle_level_irq+0xa4/0x160)
[ 0.367309] r5:00000000 r4:c3953e00
[ 0.367309] [<c005df2c>] (handle_level_irq) from [<c005ac0c>] (generic_handle_irq+0x34/0x44)
[ 0.367340] r4:00000013 r3:c005df2c
[ 0.367370] [<c005abd8>] (generic_handle_irq) from [<c005ae70>] (__handle_domain_irq+0x5c/0xb0)
[ 0.367370] r4:c055db00 r3:00000106
[ 0.367401] [<c005ae14>] (__handle_domain_irq) from [<c000866c>] (omap_intc_handle_irq+0xd0/0xd8)
[ 0.367401] r8:60000113 r7:0000000a r6:c05842c0 r5:c3857d00 r4:c055dd20 r3:c3857d00
[ 0.367431] [<c000859c>] (omap_intc_handle_irq) from [<c0012500>] (__irq_svc+0x40/0x74)
[ 0.367431] Exception stack(0xc3857d00 to 0xc3857d48)
[ 0.367462] 7d00: 00000000 0000001c 00000001 00000000 c38b7e00 c0554a80 0000001c 00000000
[ 0.367492] 7d20: 60000113 80000000 c3856000 c3857d74 c3857d28 c3857d48 c005e3c0 c005c8f8
[ 0.367492] 7d40: 40000113 ffffffff
[ 0.367492] r7:c3857d34 r6:ffffffff r5:40000113 r4:c005c8f8
[ 0.367523] [<c005c66c>] (__setup_irq) from [<c005cc3c>] (setup_irq+0x48/0x90)
[ 0.367523] r8:20000113 r7:c39ec400 r6:c0554a80 r5:0000001c r4:c38b7e00
[ 0.367553] [<c005cbf4>] (setup_irq) from [<c002a7fc>] (omap_system_dma_probe+0x224/0x2f8)
[ 0.367584] r6:00000600 r5:c057342c r4:0000001c r3:00000030
[ 0.367614] [<c002a5d8>] (omap_system_dma_probe) from [<c02875d8>] (platform_drv_probe+0x4c/0xac)
[ 0.367614] r10:00000000 r9:c04ff5f0 r8:00000000 r7:fffffdfb r6:c0554a3c r5:c39ec410
[ 0.367645] r4:c05875f0
[ 0.367645] [<c028758c>] (platform_drv_probe) from [<c0285eb8>] (driver_probe_device+0x110/0x244)
[ 0.367675] r7:c0554a3c r6:00000000 r5:c39ec410 r4:c05875f0
[ 0.367675] [<c0285da8>] (driver_probe_device) from [<c02860cc>] (__driver_attach+0x94/0x98)
[ 0.367706] r8:0000006a r7:00000000 r6:c39ec444 r5:c0554a3c r4:c39ec410 r3:00000000
[ 0.367736] [<c0286038>] (__driver_attach) from [<c0284270>] (bus_for_each_dev+0x74/0xa8)
[ 0.367736] r6:c0286038 r5:c0554a3c r4:00000000 r3:00000000
[ 0.367767] [<c02841fc>] (bus_for_each_dev) from [<c02859ac>] (driver_attach+0x24/0x28)
[ 0.367797] r6:c0564448 r5:c39d4c00 r4:c0554a3c
[ 0.367828] [<c0285988>] (driver_attach) from [<c0285664>] (bus_add_driver+0x150/0x1f8)
[ 0.367828] [<c0285514>] (bus_add_driver) from [<c028655c>] (driver_register+0x80/0x100)
[ 0.367828] r7:c050d4bc r6:c39ed580 r5:c053fba0 r4:c0554a3c
[ 0.367858] [<c02864dc>] (driver_register) from [<c028751c>] (__platform_driver_register+0x5c/0x64)
[ 0.367889] r5:c053fba0 r4:c053fba0
[ 0.367889] [<c02874c0>] (__platform_driver_register) from [<c050d4d8>] (omap_system_dma_init+0x1c/0x20)
[ 0.367919] [<c050d4bc>] (omap_system_dma_init) from [<c0008868>] (do_one_initcall+0x94/0x1dc)
[ 0.367950] [<c00087d4>] (do_one_initcall) from [<c04ffdc0>] (kernel_init_freeable+0x12c/0x1d0)
[ 0.367950] r10:c0528b78 r9:c04ff5f0 r8:0000006a r7:c0572880 r6:c0572880 r5:00000003
[ 0.367980] r4:c0535b80
[ 0.367980] [<c04ffc94>] (kernel_init_freeable) from [<c03cdd9c>] (kernel_init+0x10/0xf0)
[ 0.368011] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c03cdd8c
[ 0.368011] r4:00000000
[ 0.368041] [<c03cdd8c>] (kernel_init) from [<c000ea78>] (ret_from_fork+0x14/0x3c)
[ 0.368041] r4:00000000 r3:c3856000
[ 0.368103] ---[ end trace 417eab97f066e1a5 ]---
next reply other threads:[~2015-01-01 18:12 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-01 18:12 Peter Kümmel [this message]
2015-01-01 18:20 ` 3.18.1->3.19-rc2: In-band Error seen by MPU Aaro Koskinen
2015-01-02 16:19 ` Tony Lindgren
2015-01-02 18:31 ` Peter Kümmel
2015-01-02 20:19 ` Aaro Koskinen
2015-01-02 20:40 ` Tony Lindgren
2015-01-02 22:34 ` Aaro Koskinen
2015-01-03 0:02 ` Tony Lindgren
2015-01-03 11:24 ` Peter Kümmel
2015-01-03 12:16 ` Aaro Koskinen
2015-01-05 15:43 ` Felipe Balbi
2015-01-05 23:16 ` Aaro Koskinen
2015-01-06 0:12 ` Tony Lindgren
2015-01-06 2:02 ` Felipe Balbi
2015-01-06 2:01 ` Felipe Balbi
2015-01-06 12:38 ` Aaro Koskinen
2015-01-06 16:51 ` [PATCH] irqchip: omap-intc: fix legacy DMA regression Felipe Balbi
2015-01-06 16:51 ` Felipe Balbi
2015-01-06 17:48 ` Aaro Koskinen
2015-01-06 17:48 ` Aaro Koskinen
2015-01-06 17:52 ` Tony Lindgren
2015-01-06 17:52 ` Tony Lindgren
2015-01-06 18:05 ` Russell King - ARM Linux
2015-01-06 18:05 ` Russell King - ARM Linux
2015-01-06 18:24 ` Aaro Koskinen
2015-01-06 18:24 ` Aaro Koskinen
2015-01-06 18:30 ` Tony Lindgren
2015-01-06 18:30 ` Tony Lindgren
2015-01-06 20:38 ` [PATCH v2] " Felipe Balbi
2015-01-06 20:38 ` Felipe Balbi
2015-01-07 3:00 ` Jason Cooper
2015-01-07 3:00 ` Jason Cooper
2015-01-19 18:34 ` Tony Lindgren
2015-01-19 18:34 ` Tony Lindgren
2015-01-07 11:12 ` [PATCH] " Peter Kümmel
2015-01-07 11:12 ` Peter Kümmel
2015-01-06 11:25 ` 3.18.1->3.19-rc2: In-band Error seen by MPU Peter Kümmel
2015-01-06 11:52 ` Sebastian Reichel
2015-01-06 12:47 ` Aaro Koskinen
2015-01-06 13:47 ` Peter Kümmel
2015-01-06 13:04 ` Peter Kümmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54A58E23.5080103@gmx.net \
--to=syntheticpp@gmx.net \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.