All of lore.kernel.org
 help / color / mirror / Atom feed
From: Phillip Susi <psusi@ubuntu.com>
To: "linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>
Subject: PMP product ID mismatch
Date: Mon, 05 Jan 2015 20:25:38 -0500	[thread overview]
Message-ID: <54AB3992.5090106@ubuntu.com> (raw)

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

I'm getting a PMP product ID mismatch error after the two drives in my
esata dock are attached to the scsi layer and IO fails to them and
they are then offlined.  When I connect the dock to another controller
it works fine.  What could cause this?  One thing I noticed is that
the good controller does not support FIS Based Switching, but the bad
one does.  Is there a way to disable fbs to see if that fixes it?

Here's what dmesg shows repeatedly:

[  860.620374] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  860.620979] ata9.15: Port Multiplier 1.1, 0x197b:0x2352 r0, 2
ports, feat 0x0/0x0
[  860.620984] ata9.15: Asynchronous notification not supported,
hotplug won't work on fan-out ports. Use warm-plug instead.
[  860.621002] ahci 0000:09:00.0: FBS is enabled
[  860.621134] ata9.00: hard resetting link
[  860.940645] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[  860.940691] ata9.01: hard resetting link
[  861.260340] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[  861.260991] ata9.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max
UDMA/100
[  861.260994] ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth
31/32), AA
[  861.261909] ata9.00: configured for UDMA/100
[  861.262607] ata9.01: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max
UDMA/100
[  861.262612] ata9.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth
31/32), AA
[  861.263362] ata9.01: configured for UDMA/100
[  861.263445] ata9: EH complete
[  861.263457] ata9.00: detaching (SCSI 8:0:0:0)
[  861.266097] sd 8:0:0:0: [sdc] Synchronizing SCSI cache
[  861.266236] sd 8:0:0:0: [sdc] Stopping disk
[  861.676148] ata9.01: detaching (SCSI 8:1:0:0)
[  861.676650] sd 8:1:0:0: [sde] Synchronizing SCSI cache
[  861.676781] sd 8:1:0:0: [sde] Stopping disk
[  862.086251] scsi 8:0:0:0: Direct-Access     ATA      WDC
WD10EZEX-08M 1A01 PQ: 0 ANSI: 5
[  862.086528] sd 8:0:0:0: Attached scsi generic sg2 type 0
[  862.086637] scsi 8:1:0:0: Direct-Access     ATA      WDC
WD10EZEX-08M 1A01 PQ: 0 ANSI: 5
[  862.086903] sd 8:1:0:0: Attached scsi generic sg5 type 0
[  862.087745] sd 8:0:0:0: [sdc] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[  862.087750] sd 8:0:0:0: [sdc] 4096-byte physical blocks
[  862.087765] sd 8:1:0:0: [sde] 1953525168 512-byte logical blocks:
(1.00 TB/931 GiB)
[  862.087768] sd 8:1:0:0: [sde] 4096-byte physical blocks
[  862.087851] sd 8:1:0:0: [sde] Write Protect is off
[  862.087854] sd 8:1:0:0: [sde] Mode Sense: 00 3a 00 00
[  862.087867] sd 8:0:0:0: [sdc] Write Protect is off
[  862.087870] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[  862.087901] sd 8:0:0:0: [sdc] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[  862.087989] sd 8:1:0:0: [sde] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[  863.448163]  sde: sde1
[  863.448862] sd 8:1:0:0: [sde] Attached SCSI disk
[  863.523189]  sdc: sdc1
[  863.523947] sd 8:0:0:0: [sdc] Attached SCSI disk
[  863.612233] ata9.15: PMP product ID mismatch
[  863.612239] ata9.15: hard resetting link
[  863.929205] ata9.15: SATA link down (SStatus 0 SControl 300)
[  864.555564] ata9.15: failed to read PMP GSCR[0] (Emask=0x100)
[  864.555569] ata9.15: PMP revalidation failed (errno=-5)
[  864.555574] ata9.15: limiting SATA link speed to 1.5 Gbps
[  868.924411] ata9.15: hard resetting link
[  869.415954] ata9.15: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  869.416451] ata9.15: Port Multiplier vendor mismatch '0x197b' != '0x0'
[  869.416456] ata9.15: PMP revalidation failed (errno=-19)
[  872.209944] ata9.15: hard resetting link
[  872.700815] ata9.15: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  872.701358] ata9.15: Port Multiplier vendor mismatch '0x197b' != '0x0'
[  872.701363] ata9.15: PMP revalidation failed (errno=-19)
[  877.696028] ata9.15: hard resetting link
[  878.187571] ata9.15: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  878.188111] ata9.15: Port Multiplier vendor mismatch '0x197b' != '0x0'
[  878.188115] ata9.15: PMP revalidation failed (errno=-19)
[  878.188118] ata9.15: failed to recover PMP after 5 tries, giving up
[  878.188120] ata9.15: Port Multiplier detaching
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBCgAGBQJUqzmPAAoJENRVrw2cjl5R4fcH/RI0anQe3J5PcmcSYnW3f2r2
g0FGxVG0uwHWygHrBNt5HjTdJ1hmXM6HU8xFcNl8TfMpCBGtwOi3gu4IV0vGXjZ9
wALRcwQiWwUmvrK+/MUyfmHzSz4ITAhMHVdTDCpMsy/dCstP3p8XwhOl+GWSZe1o
RY0G6353Z3TugyfGLT9ddYRdAMyWns2VNXJbxiVtQUWLNWcmhEdbMUINYjF3BUjE
pYTJ9lnR9irnyXWlyiVtwAD/LYnGnKA7ev/1h/A1vW7azYxou0N90NxXB9I0Tp1M
x9n7tlDxCIjlW+Qi9q9rPwl60gd4sD2JcyQlCf5Q+j3P12OcL2EmKgqUuo+W/eA=
=BeK5
-----END PGP SIGNATURE-----

             reply	other threads:[~2015-01-06  1:25 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-06  1:25 Phillip Susi [this message]
2015-01-07  2:40 ` PMP product ID mismatch Phillip Susi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54AB3992.5090106@ubuntu.com \
    --to=psusi@ubuntu.com \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.