All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Snow <jsnow@redhat.com>
To: Peter Wu <peter@lekensteyn.nl>, qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Stefan Hajnoczi <stefanha@redhat.com>
Subject: Re: [Qemu-devel] [PATCH v2 06/12] block/dmg: process XML plists
Date: Wed, 07 Jan 2015 13:06:10 -0500	[thread overview]
Message-ID: <54AD7592.4040402@redhat.com> (raw)
In-Reply-To: <1420566495-13284-7-git-send-email-peter@lekensteyn.nl>



On 01/06/2015 12:48 PM, Peter Wu wrote:
> The format is simple enough to avoid using a full-blown XML parser. It
> assumes that all BLKX items begin with the "mish" magic word, therefore
> it is not a problem if other values get matched which are not a BLKX
> block.
>
> The offsets are based on the description at
> http://newosxbook.com/DMG.html
>
> Signed-off-by: Peter Wu <peter@lekensteyn.nl>
> ---
>   v2: added offset check, allow resource fork to be located at beginning
>       of file (removed `rsrc_fork_offset != 0` condition)
>
> It got a `Reviewed-by: John Snow <jsnow@redhat.com>` for v1. I have not
> copied the R-b as I wanted to be sure that John agrees with the removal
> of the offset != 0 condition.

It makes sense to me, but as I don't really have an authoritative 
standard to follow, this really relies on "This didn't break anything 
obvious."

I think you have more images than I do, and as long as you tested them 
again under v2:

Reviewed-by: John Snow <jsnow@redhat.com>

> ---
>   block/dmg.c | 74 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 74 insertions(+)
>
> diff --git a/block/dmg.c b/block/dmg.c
> index 5f6976b..1a0fa0e 100644
> --- a/block/dmg.c
> +++ b/block/dmg.c
> @@ -26,6 +26,7 @@
>   #include "qemu/bswap.h"
>   #include "qemu/module.h"
>   #include <zlib.h>
> +#include <glib.h>
>
>   enum {
>       /* Limit chunk sizes to prevent unreasonable amounts of memory being used
> @@ -345,12 +346,66 @@ fail:
>       return ret;
>   }
>
> +static int dmg_read_plist_xml(BlockDriverState *bs, DmgHeaderState *ds,
> +                              uint64_t info_begin, uint64_t info_length)
> +{
> +    BDRVDMGState *s = bs->opaque;
> +    int ret;
> +    uint8_t *buffer = NULL;
> +    char *data_begin, *data_end;
> +
> +    /* Have at least some length to avoid NULL for g_malloc. Attempt to set a
> +     * safe upper cap on the data length. A test sample had a XML length of
> +     * about 1 MiB. */
> +    if (info_length == 0 || info_length > 16 * 1024 * 1024) {
> +        ret = -EINVAL;
> +        goto fail;
> +    }
> +
> +    buffer = g_malloc(info_length + 1);
> +    buffer[info_length] = '\0';
> +    ret = bdrv_pread(bs->file, info_begin, buffer, info_length);
> +    if (ret != info_length) {
> +        ret = -EINVAL;
> +        goto fail;
> +    }
> +
> +    /* look for <data>...</data>. The data is 284 (0x11c) bytes after base64
> +     * decode. The actual data element has 431 (0x1af) bytes which includes tabs
> +     * and line feeds. */
> +    data_end = (char *)buffer;
> +    while ((data_begin = strstr(data_end, "<data>")) != NULL) {
> +        gsize out_len = 0;
> +
> +        data_begin += 6;
> +        data_end = strstr(data_begin, "</data>");
> +        /* malformed XML? */
> +        if (data_end == NULL) {
> +            ret = -EINVAL;
> +            goto fail;
> +        }
> +        *data_end++ = '\0';
> +        g_base64_decode_inplace(data_begin, &out_len);
> +        ret = dmg_read_mish_block(s, ds, (uint8_t *)data_begin,
> +                                  (uint32_t)out_len);
> +        if (ret < 0) {
> +            goto fail;
> +        }
> +    }
> +    ret = 0;
> +
> +fail:
> +    g_free(buffer);
> +    return ret;
> +}
> +
>   static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
>                       Error **errp)
>   {
>       BDRVDMGState *s = bs->opaque;
>       DmgHeaderState ds;
>       uint64_t rsrc_fork_offset, rsrc_fork_length;
> +    uint64_t plist_xml_offset, plist_xml_length;
>       int64_t offset;
>       int ret;
>
> @@ -384,12 +439,31 @@ static int dmg_open(BlockDriverState *bs, QDict *options, int flags,
>           ret = -EINVAL;
>           goto fail;
>       }
> +    /* offset of property list (XMLOffset) */
> +    ret = read_uint64(bs, offset + 0xd8, &plist_xml_offset);
> +    if (ret < 0) {
> +        goto fail;
> +    }
> +    ret = read_uint64(bs, offset + 0xe0, &plist_xml_length);
> +    if (ret < 0) {
> +        goto fail;
> +    }
> +    if (plist_xml_offset >= offset ||
> +        plist_xml_length > offset - plist_xml_offset) {
> +        ret = -EINVAL;
> +        goto fail;
> +    }
>       if (rsrc_fork_length != 0) {
>           ret = dmg_read_resource_fork(bs, &ds,
>                                        rsrc_fork_offset, rsrc_fork_length);
>           if (ret < 0) {
>               goto fail;
>           }
> +    } else if (plist_xml_length != 0) {
> +        ret = dmg_read_plist_xml(bs, &ds, plist_xml_offset, plist_xml_length);
> +        if (ret < 0) {
> +            goto fail;
> +        }
>       } else {
>           ret = -EINVAL;
>           goto fail;
>

  reply	other threads:[~2015-01-07 18:06 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-06 17:48 [Qemu-devel] [PATCH v2 00/12] block/dmg: (compatibility) fixes and bzip2 support Peter Wu
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 01/12] block/dmg: properly detect the UDIF trailer Peter Wu
2015-01-07 13:19   ` Stefan Hajnoczi
2015-01-07 14:19     ` Peter Wu
2015-01-14 16:17       ` Stefan Hajnoczi
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 02/12] block/dmg: extract mish block decoding functionality Peter Wu
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 03/12] block/dmg: extract processing of resource forks Peter Wu
2015-01-07 18:05   ` John Snow
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 04/12] block/dmg: process a buffer instead of reading ints Peter Wu
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 05/12] block/dmg: validate chunk size to avoid overflow Peter Wu
2015-01-07 18:05   ` John Snow
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 06/12] block/dmg: process XML plists Peter Wu
2015-01-07 18:06   ` John Snow [this message]
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 07/12] block/dmg: set virtual size to a non-zero value Peter Wu
2015-01-07 18:07   ` John Snow
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 08/12] block/dmg: fix sector data offset calculation Peter Wu
2015-01-07 18:08   ` John Snow
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 09/12] block/dmg: use SectorNumber from BLKX header Peter Wu
2015-01-07 18:08   ` John Snow
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 10/12] block/dmg: factor out block type check Peter Wu
2015-01-07 18:09   ` John Snow
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 11/12] block/dmg: support bzip2 block entry types Peter Wu
2015-01-07 11:08   ` Paolo Bonzini
2015-01-07 18:09   ` John Snow
2015-01-06 17:48 ` [Qemu-devel] [PATCH v2 12/12] block/dmg: improve zeroes handling Peter Wu
2015-01-07 18:10   ` John Snow
2015-01-14 16:16 ` [Qemu-devel] [PATCH v2 00/12] block/dmg: (compatibility) fixes and bzip2 support Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54AD7592.4040402@redhat.com \
    --to=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=peter@lekensteyn.nl \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.