[PATCH 0/5] Feature enhancements for ses module

[PATCH 0/5] Feature enhancements for ses module

[Song Liu]

1: close potential race condition by at enclosure race condition

2,3,4: add enclosure id and device slot, so we can create symlink
       in /dev/disk/by-slot:
  # ls -d /dev/disk/by-slot/*
    /dev/disk/by-slot/enclosure-0x5000ae41fc1310ff-slot0

5: add ability to power on/off device with power_status file in
   sysfs.

Due to the complexity of SES standard, the module is not to replace implement \
all features of sg_ses (sg3_utils).

Patch 5 and existing features for device element and array device elements control \
of HDDs. It is helpful to handle some HDD related fields in the kernel, as the \
kernel can generate mapping between a device to the SES device element (or array \
device element):

/sys/block/sdc/device/enclosure_deviceXXX/

With patch 5, we can easily power off a running HDD by

echo off > /sys/block/sdc/device/enclosure_deviceXXX/power_status

This is very useful for systems like Cold Storage, where HDDs are being powered \
on/off frequently


Dan Williams (4):
  ses: close potential registration race
  ses: generate KOBJ_CHANGE on enclosure attach
  ses: add enclosure logical id
  ses: add reliable slot attribute

Song Liu (1):
  ses: Add power_status to SES device slot

 drivers/misc/enclosure.c  | 106 +++++++++++++++++++++++++++++----
 drivers/scsi/ses.c        | 148 +++++++++++++++++++++++++++++++++++++++-------
 include/linux/enclosure.h |  13 +++-
 3 files changed, 232 insertions(+), 35 deletions(-)

-- 
1.8.1

[PATCH 1/5] ses: close potential registration race

[Song Liu]

From: Dan Williams <dan.j.williams@intel.com>

The slot and address fields have a small window of instability when
userspace can read them before initialization. Separate
enclosure_component
allocation from registration.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Cc: Hannes Reinecke <hare@suse.de>
---
 drivers/misc/enclosure.c  | 35 +++++++++++++++++++++++++----------
 drivers/scsi/ses.c        | 21 ++++++++++++++-------
 include/linux/enclosure.h |  5 +++--
 3 files changed, 42 insertions(+), 19 deletions(-)

diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 180a544..d566f0f 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -273,23 +273,22 @@ enclosure_component_find_by_name(struct enclosure_device *edev,
 static const struct attribute_group *enclosure_component_groups[];
 
 /**
- * enclosure_component_register - add a particular component to an enclosure
+ * enclosure_component_alloc - prepare a new enclosure component
  * @edev:	the enclosure to add the component
  * @num:	the device number
  * @type:	the type of component being added
  * @name:	an optional name to appear in sysfs (leave NULL if none)
  *
- * Registers the component.  The name is optional for enclosures that
- * give their components a unique name.  If not, leave the field NULL
- * and a name will be assigned.
+ * The name is optional for enclosures that give their components a unique
+ * name.  If not, leave the field NULL and a name will be assigned.
  *
  * Returns a pointer to the enclosure component or an error.
  */
 struct enclosure_component *
-enclosure_component_register(struct enclosure_device *edev,
-			     unsigned int number,
-			     enum enclosure_component_type type,
-			     const char *name)
+enclosure_component_alloc(struct enclosure_device *edev,
+			  unsigned int number,
+			  enum enclosure_component_type type,
+			  const char *name)
 {
 	struct enclosure_component *ecomp;
 	struct device *cdev;
@@ -327,14 +326,30 @@ enclosure_component_register(struct enclosure_device *edev,
 	cdev->release = enclosure_component_release;
 	cdev->groups = enclosure_component_groups;
 
+	return ecomp;
+}
+EXPORT_SYMBOL_GPL(enclosure_component_alloc);
+
+/**
+ * enclosure_component_register - publishes an initialized enclosure component
+ * @ecomp:	component to add
+ *
+ * Returns 0 on successful registration, releases the component otherwise
+ */
+int enclosure_component_register(struct enclosure_component *ecomp)
+{
+	struct device *cdev;
+	int err;
+
+	cdev = &ecomp->cdev;
 	err = device_register(cdev);
 	if (err) {
 		ecomp->number = -1;
 		put_device(cdev);
-		return ERR_PTR(err);
+		return err;
 	}
 
-	return ecomp;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(enclosure_component_register);
 
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index b7e79e7..7dd9cf5 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -423,16 +423,23 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
 			    type_ptr[0] == ENCLOSURE_COMPONENT_ARRAY_DEVICE) {
 
 				if (create)
-					ecomp =	enclosure_component_register(edev,
-									     components++,
-									     type_ptr[0],
-									     name);
+					ecomp =	enclosure_component_alloc(
+						edev,
+						components++,
+						type_ptr[0],
+						name);
 				else
 					ecomp = &edev->component[components++];
 
-				if (!IS_ERR(ecomp) && addl_desc_ptr)
-					ses_process_descriptor(ecomp,
-							       addl_desc_ptr);
+				if (!IS_ERR(ecomp)) {
+					if (addl_desc_ptr)
+						ses_process_descriptor(
+							ecomp,
+							addl_desc_ptr);
+					if (create)
+						enclosure_component_register(
+							ecomp);
+				}
 			}
 			if (desc_ptr)
 				desc_ptr += len;
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
index 9a33c5f..a835d33 100644
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -120,8 +120,9 @@ enclosure_register(struct device *, const char *, int,
 		   struct enclosure_component_callbacks *);
 void enclosure_unregister(struct enclosure_device *);
 struct enclosure_component *
-enclosure_component_register(struct enclosure_device *, unsigned int,
-				 enum enclosure_component_type, const char *);
+enclosure_component_alloc(struct enclosure_device *, unsigned int,
+			  enum enclosure_component_type, const char *);
+int enclosure_component_register(struct enclosure_component *);
 int enclosure_add_device(struct enclosure_device *enclosure, int component,
 			 struct device *dev);
 int enclosure_remove_device(struct enclosure_device *, struct device *);
-- 
1.8.1

[PATCH 2/5] ses: generate KOBJ_CHANGE on enclosure attach

[Song Liu]

From: Dan Williams <dan.j.williams@intel.com>

In support of a /dev/disk/by-slot populated with data from the enclosure
and ses modules udev needs notification when the new interface
files/links are available.  Otherwise, any udev rules specified for the
disk cannot assume that the enclosure topology has settled.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/ses.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 7dd9cf5..6662b0c 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -349,7 +349,8 @@ static int ses_enclosure_find_by_addr(struct enclosure_device *edev,
 		if (scomp->addr != efd->addr)
 			continue;
 
-		enclosure_add_device(edev, i, efd->dev);
+		if (enclosure_add_device(edev, i, efd->dev) == 0)
+			kobject_uevent(&efd->dev->kobj, KOBJ_CHANGE);
 		return 1;
 	}
 	return 0;
-- 
1.8.1

[PATCH 3/5] ses: add enclosure logical id

[Song Liu]

From: Dan Williams <dan.j.williams@intel.com>

Export the NAA logical id for the enclosure.  This is optionally
available from the sas_transport_class, but it is really a property of
the enclosure.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Cc: Hannes Reinecke <hare@suse.de>
---
 drivers/misc/enclosure.c  | 13 +++++++++++++
 drivers/scsi/ses.c        |  9 +++++++++
 include/linux/enclosure.h |  1 +
 3 files changed, 23 insertions(+)

diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index d566f0f..ab4de85 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -432,8 +432,21 @@ static ssize_t components_show(struct device *cdev,
 }
 static DEVICE_ATTR_RO(components);
 
+static ssize_t id_show(struct device *cdev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct enclosure_device *edev = to_enclosure_device(cdev);
+
+	if (edev->cb->show_id)
+		return edev->cb->show_id(edev, buf);
+	return -EINVAL;
+}
+static DEVICE_ATTR_RO(id);
+
 static struct attribute *enclosure_class_attrs[] = {
 	&dev_attr_components.attr,
+	&dev_attr_id.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(enclosure_class);
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 6662b0c..1041556 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -258,6 +258,14 @@ static int ses_set_active(struct enclosure_device *edev,
 	return ses_set_page2_descriptor(edev, ecomp, desc);
 }
 
+static int ses_show_id(struct enclosure_device *edev, char *buf)
+{
+	struct ses_device *ses_dev = edev->scratch;
+	unsigned long long id = get_unaligned_be64(ses_dev->page1+8+4);
+
+	return sprintf(buf, "%#llx\n", id);
+}
+
 static struct enclosure_component_callbacks ses_enclosure_callbacks = {
 	.get_fault		= ses_get_fault,
 	.set_fault		= ses_set_fault,
@@ -265,6 +273,7 @@ static struct enclosure_component_callbacks ses_enclosure_callbacks = {
 	.get_locate		= ses_get_locate,
 	.set_locate		= ses_set_locate,
 	.set_active		= ses_set_active,
+	.show_id		= ses_show_id,
 };
 
 struct ses_host_edev {
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
index a835d33..807622b 100644
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -79,6 +79,7 @@ struct enclosure_component_callbacks {
 	int (*set_locate)(struct enclosure_device *,
 			  struct enclosure_component *,
 			  enum enclosure_component_setting);
+	int (*show_id)(struct enclosure_device *, char *buf);
 };
 
 
-- 
1.8.1

[PATCH 4/5] ses: add reliable slot attribute

[Song Liu]

From: Dan Williams <dan.j.williams@intel.com>

The name provided by firmware is in a vendor specific format, publish
the slot number to have a reliable mechanism for identifying slots
across firmware implementations.  If the enclosure does not provide a
slot number fallback to the component number which is guaranteed unique,
and usually mirrors the slot number.

Cleaned up the unused ses_component.desc in the process.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
---
 drivers/misc/enclosure.c  | 20 +++++++++++++++++++-
 drivers/scsi/ses.c        | 17 ++++++++++++-----
 include/linux/enclosure.h |  1 +
 3 files changed, 32 insertions(+), 6 deletions(-)

diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index ab4de85..b7995ed 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -145,8 +145,10 @@ enclosure_register(struct device *dev, const char *name, int components,
 	if (err)
 		goto err;
 
-	for (i = 0; i < components; i++)
+	for (i = 0; i < components; i++) {
 		edev->component[i].number = -1;
+		edev->component[i].slot = -1;
+	}
 
 	mutex_lock(&container_list_lock);
 	list_add_tail(&edev->node, &container_list);
@@ -589,6 +591,20 @@ static ssize_t get_component_type(struct device *cdev,
 	return snprintf(buf, 40, "%s\n", enclosure_type[ecomp->type]);
 }
 
+static ssize_t get_component_slot(struct device *cdev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct enclosure_component *ecomp = to_enclosure_component(cdev);
+	int slot;
+
+	/* if the enclosure does not override then use 'number' as a stand-in */
+	if (ecomp->slot >= 0)
+		slot = ecomp->slot;
+	else
+		slot = ecomp->number;
+
+	return snprintf(buf, 40, "%d\n", slot);
+}
 
 static DEVICE_ATTR(fault, S_IRUGO | S_IWUSR, get_component_fault,
 		    set_component_fault);
@@ -599,6 +615,7 @@ static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, get_component_active,
 static DEVICE_ATTR(locate, S_IRUGO | S_IWUSR, get_component_locate,
 		   set_component_locate);
 static DEVICE_ATTR(type, S_IRUGO, get_component_type, NULL);
+static DEVICE_ATTR(slot, S_IRUGO, get_component_slot, NULL);
 
 static struct attribute *enclosure_component_attrs[] = {
 	&dev_attr_fault.attr,
@@ -606,6 +623,7 @@ static struct attribute *enclosure_component_attrs[] = {
 	&dev_attr_active.attr,
 	&dev_attr_locate.attr,
 	&dev_attr_type.attr,
+	&dev_attr_slot.attr,
 	NULL
 };
 ATTRIBUTE_GROUPS(enclosure_component);
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 1041556..433de8e 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -47,7 +47,6 @@ struct ses_device {
 
 struct ses_component {
 	u64 addr;
-	unsigned char *desc;
 };
 
 static int ses_probe(struct device *dev)
@@ -307,19 +306,26 @@ static void ses_process_descriptor(struct enclosure_component *ecomp,
 	int invalid = desc[0] & 0x80;
 	enum scsi_protocol proto = desc[0] & 0x0f;
 	u64 addr = 0;
+	int slot = -1;
 	struct ses_component *scomp = ecomp->scratch;
 	unsigned char *d;
 
-	scomp->desc = desc;
-
 	if (invalid)
 		return;
 
 	switch (proto) {
+	case SCSI_PROTOCOL_FCP:
+		if (eip) {
+			d = desc + 4;
+			slot = d[3];
+		}
+		break;
 	case SCSI_PROTOCOL_SAS:
-		if (eip)
+		if (eip) {
+			d = desc + 4;
+			slot = d[3];
 			d = desc + 8;
-		else
+		} else
 			d = desc + 4;
 		/* only take the phy0 addr */
 		addr = (u64)d[12] << 56 |
@@ -335,6 +341,7 @@ static void ses_process_descriptor(struct enclosure_component *ecomp,
 		/* FIXME: Need to add more protocols than just SAS */
 		break;
 	}
+	ecomp->slot = slot;
 	scomp->addr = addr;
 }
 
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
index 807622b..0f826c1 100644
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -92,6 +92,7 @@ struct enclosure_component {
 	int fault;
 	int active;
 	int locate;
+	int slot;
 	enum enclosure_status status;
 };
 
-- 
1.8.1

[PATCH 5/5] ses: Add power_status to SES device slot

[Song Liu]

Add power_status to SES device slot, so we can power on/off the
HDDs behind the enclosure.

Check firmware status in ses_set_* before sending control pages to
firmware.

Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jens Axboe <axboe@fb.com>
Cc: Hannes Reinecke <hare@suse.de>
---
 drivers/misc/enclosure.c  | 38 ++++++++++++++++++
 drivers/scsi/ses.c        | 98 ++++++++++++++++++++++++++++++++++++++++++-----
 include/linux/enclosure.h |  6 +++
 3 files changed, 133 insertions(+), 9 deletions(-)

diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index b7995ed..3289d4d 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -148,6 +148,7 @@ enclosure_register(struct device *dev, const char *name, int components,
 	for (i = 0; i < components; i++) {
 		edev->component[i].number = -1;
 		edev->component[i].slot = -1;
+		edev->component[i].power_status = 1;
 	}
 
 	mutex_lock(&container_list_lock);
@@ -583,6 +584,40 @@ static ssize_t set_component_locate(struct device *cdev,
 	return count;
 }
 
+static ssize_t get_component_power_status(struct device *cdev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+	struct enclosure_component *ecomp = to_enclosure_component(cdev);
+
+	if (edev->cb->get_power_status)
+		edev->cb->get_power_status(edev, ecomp);
+	return snprintf(buf, 40, "%s\n", ecomp->power_status ? "on" : "off");
+}
+
+static ssize_t set_component_power_status(struct device *cdev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t count)
+{
+	struct enclosure_device *edev = to_enclosure_device(cdev->parent);
+	struct enclosure_component *ecomp = to_enclosure_component(cdev);
+	int val;
+
+	if (strncmp(buf, "on", 2) == 0 &&
+	    (buf[2] == '\n' || buf[2] == '\0'))
+		val = 1;
+	else if (strncmp(buf, "off", 3) == 0 &&
+	    (buf[3] == '\n' || buf[3] == '\0'))
+		val = 0;
+	else
+		return -EINVAL;
+
+	if (edev->cb->set_power_status)
+		edev->cb->set_power_status(edev, ecomp, val);
+	return count;
+}
+
 static ssize_t get_component_type(struct device *cdev,
 				  struct device_attribute *attr, char *buf)
 {
@@ -614,6 +649,8 @@ static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, get_component_active,
 		   set_component_active);
 static DEVICE_ATTR(locate, S_IRUGO | S_IWUSR, get_component_locate,
 		   set_component_locate);
+static DEVICE_ATTR(power_status, S_IRUGO | S_IWUSR, get_component_power_status,
+		   set_component_power_status);
 static DEVICE_ATTR(type, S_IRUGO, get_component_type, NULL);
 static DEVICE_ATTR(slot, S_IRUGO, get_component_slot, NULL);
 
@@ -622,6 +659,7 @@ static struct attribute *enclosure_component_attrs[] = {
 	&dev_attr_status.attr,
 	&dev_attr_active.attr,
 	&dev_attr_locate.attr,
+	&dev_attr_power_status.attr,
 	&dev_attr_type.attr,
 	&dev_attr_slot.attr,
 	NULL
diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c
index 433de8e..dcb0d76 100644
--- a/drivers/scsi/ses.c
+++ b/drivers/scsi/ses.c
@@ -67,6 +67,20 @@ static int ses_probe(struct device *dev)
 #define SES_TIMEOUT (30 * HZ)
 #define SES_RETRIES 3
 
+static void init_device_slot_control(unsigned char *dest_desc,
+				     struct enclosure_component *ecomp,
+				     unsigned char *status)
+{
+	memcpy(dest_desc, status, 4);
+	dest_desc[0] = 0;
+	/* only clear byte 1 for ENCLOSURE_COMPONENT_DEVICE */
+	if (ecomp->type == ENCLOSURE_COMPONENT_DEVICE)
+		dest_desc[1] = 0;
+	dest_desc[2] &= 0xde;
+	dest_desc[3] &= 0x3c;
+}
+
+
 static int ses_recv_diag(struct scsi_device *sdev, int page_code,
 			 void *buf, int bufflen)
 {
@@ -178,14 +192,22 @@ static int ses_set_fault(struct enclosure_device *edev,
 			  struct enclosure_component *ecomp,
 			 enum enclosure_component_setting val)
 {
-	unsigned char desc[4] = {0 };
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
 
 	switch (val) {
 	case ENCLOSURE_SETTING_DISABLED:
-		/* zero is disabled */
+		desc[3] &= 0xdf;
 		break;
 	case ENCLOSURE_SETTING_ENABLED:
-		desc[3] = 0x20;
+		desc[3] |= 0x20;
 		break;
 	default:
 		/* SES doesn't do the SGPIO blink settings */
@@ -219,14 +241,22 @@ static int ses_set_locate(struct enclosure_device *edev,
 			  struct enclosure_component *ecomp,
 			  enum enclosure_component_setting val)
 {
-	unsigned char desc[4] = {0 };
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
 
 	switch (val) {
 	case ENCLOSURE_SETTING_DISABLED:
-		/* zero is disabled */
+		desc[2] &= 0xfd;
 		break;
 	case ENCLOSURE_SETTING_ENABLED:
-		desc[2] = 0x02;
+		desc[2] |= 0x02;
 		break;
 	default:
 		/* SES doesn't do the SGPIO blink settings */
@@ -239,15 +269,23 @@ static int ses_set_active(struct enclosure_device *edev,
 			  struct enclosure_component *ecomp,
 			  enum enclosure_component_setting val)
 {
-	unsigned char desc[4] = {0 };
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
 
 	switch (val) {
 	case ENCLOSURE_SETTING_DISABLED:
-		/* zero is disabled */
+		desc[2] &= 0x7f;
 		ecomp->active = 0;
 		break;
 	case ENCLOSURE_SETTING_ENABLED:
-		desc[2] = 0x80;
+		desc[2] |= 0x80;
 		ecomp->active = 1;
 		break;
 	default:
@@ -265,12 +303,53 @@ static int ses_show_id(struct enclosure_device *edev, char *buf)
 	return sprintf(buf, "%#llx\n", id);
 }
 
+static void ses_get_power_status(struct enclosure_device *edev,
+				 struct enclosure_component *ecomp)
+{
+	unsigned char *desc;
+
+	desc = ses_get_page2_descriptor(edev, ecomp);
+	if (desc)
+		ecomp->power_status = (desc[3] & 0x10) ? 0 : 1;
+}
+
+static int ses_set_power_status(struct enclosure_device *edev,
+				struct enclosure_component *ecomp,
+				int val)
+{
+	unsigned char desc[4];
+	unsigned char *desc_ptr;
+
+	desc_ptr = ses_get_page2_descriptor(edev, ecomp);
+
+	if (!desc_ptr)
+		return -EIO;
+
+	init_device_slot_control(desc, ecomp, desc_ptr);
+
+	switch (val) {
+	/* power = 1 is device_off = 0 and vice versa */
+	case 0:
+		desc[3] |= 0x10;
+		break;
+	case 1:
+		desc[3] &= 0xef;
+		break;
+	default:
+		return -EINVAL;
+	}
+	ecomp->power_status = val;
+	return ses_set_page2_descriptor(edev, ecomp, desc);
+}
+
 static struct enclosure_component_callbacks ses_enclosure_callbacks = {
 	.get_fault		= ses_get_fault,
 	.set_fault		= ses_set_fault,
 	.get_status		= ses_get_status,
 	.get_locate		= ses_get_locate,
 	.set_locate		= ses_set_locate,
+	.get_power_status	= ses_get_power_status,
+	.set_power_status	= ses_set_power_status,
 	.set_active		= ses_set_active,
 	.show_id		= ses_show_id,
 };
@@ -449,6 +528,7 @@ static void ses_enclosure_data_process(struct enclosure_device *edev,
 					ecomp = &edev->component[components++];
 
 				if (!IS_ERR(ecomp)) {
+					ses_get_power_status(edev, ecomp);
 					if (addl_desc_ptr)
 						ses_process_descriptor(
 							ecomp,
diff --git a/include/linux/enclosure.h b/include/linux/enclosure.h
index 0f826c1..7be22da 100644
--- a/include/linux/enclosure.h
+++ b/include/linux/enclosure.h
@@ -79,6 +79,11 @@ struct enclosure_component_callbacks {
 	int (*set_locate)(struct enclosure_device *,
 			  struct enclosure_component *,
 			  enum enclosure_component_setting);
+	void (*get_power_status)(struct enclosure_device *,
+				 struct enclosure_component *);
+	int (*set_power_status)(struct enclosure_device *,
+				struct enclosure_component *,
+				int);
 	int (*show_id)(struct enclosure_device *, char *buf);
 };
 
@@ -94,6 +99,7 @@ struct enclosure_component {
 	int locate;
 	int slot;
 	enum enclosure_status status;
+	int power_status;
 };
 
 struct enclosure_device {
-- 
1.8.1

Re: [PATCH 0/5] Feature enhancements for ses module

[Christoph Hellwig]

Thanks, applied to scsi-for-3.20.

Re: [PATCH 1/5] ses: close potential registration race

[Hannes Reinecke]

On 12/30/2014 11:46 PM, Song Liu wrote:
> From: Dan Williams <dan.j.williams@intel.com>
> 
> The slot and address fields have a small window of instability when
> userspace can read them before initialization. Separate
> enclosure_component
> allocation from registration.
> 
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> Signed-off-by: Song Liu <songliubraving@fb.com>
> Reviewed-by: Jens Axboe <axboe@fb.com>
> Cc: Hannes Reinecke <hare@suse.de>

Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/5] ses: add enclosure logical id

[Hannes Reinecke]

On 12/30/2014 11:46 PM, Song Liu wrote:
> From: Dan Williams <dan.j.williams@intel.com>
> 
> Export the NAA logical id for the enclosure.  This is optionally
> available from the sas_transport_class, but it is really a property of
> the enclosure.
> 
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> Signed-off-by: Song Liu <songliubraving@fb.com>
> Reviewed-by: Jens Axboe <axboe@fb.com>
> Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 5/5] ses: Add power_status to SES device slot

[Hannes Reinecke]

On 12/30/2014 11:46 PM, Song Liu wrote:
> Add power_status to SES device slot, so we can power on/off the
> HDDs behind the enclosure.
> 
> Check firmware status in ses_set_* before sending control pages to
> firmware.
> 
> Signed-off-by: Song Liu <songliubraving@fb.com>
> Acked-by: Dan Williams <dan.j.williams@intel.com>
> Reviewed-by: Jens Axboe <axboe@fb.com>
> Cc: Hannes Reinecke <hare@suse.de>

Reviewed-by: Hannes Reinecke <hare@suse.de>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		      zSeries & Storage
hare@suse.de			      +49 911 74053 688
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: J. Hawn, J. Guild, F. Imendörffer, HRB 16746 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html