From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Subject: Re: [PATCH v2] hwmon: (ina2xx) Add ina231 compatible string Date: Wed, 14 Jan 2015 20:44:36 -0800 Message-ID: <54B745B4.2040807@roeck-us.net> References: <1421285699-8469-1-git-send-email-khilman@kernel.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1421285699-8469-1-git-send-email-khilman@kernel.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: lm-sensors-bounces@lm-sensors.org Errors-To: lm-sensors-bounces@lm-sensors.org To: Kevin Hilman , lm-sensors@lm-sensors.org Cc: linux-samsung-soc@vger.kernel.org, DOCUMENTATION , Jonathan Corbet , open list , linaro-kernel@lists.linaro.org List-Id: linux-samsung-soc@vger.kernel.org On 01/14/2015 05:34 PM, Kevin Hilman wrote: > From: Kevin Hilman > > Add support for "ina231" as compatible string, and update > Documentation and Kconfig accordingly. > > Tested with the Exynos5422-based odroid-xu3 board which has on-board > INA231 sensors. > > Signed-off-by: Kevin Hilman Applied to -next after minor cleanup (see below). > --- > Documentation/hwmon/ina2xx | 9 +++++++++ > drivers/hwmon/Kconfig | 4 ++-- > drivers/hwmon/ina2xx.c | 1 + > 3 files changed, 12 insertions(+), 2 deletions(-) > > diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx > index 4223c2d3b508..c2f838f65ee4 100644 > --- a/Documentation/hwmon/ina2xx > +++ b/Documentation/hwmon/ina2xx > @@ -26,6 +26,12 @@ Supported chips: > Datasheet: Publicly available at the Texas Instruments website > http://www.ti.com/ > > + * Texas Instruments INA231 > + Prefix: 'ina231' > + Addresses: I2C 0x40 - 0x4f > + Datasheet: Publicly available at the Texas Instruments website > + http://www.ti.com/ > + > Author: Lothar Felten > > Description > @@ -44,6 +50,9 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage. > The INA230 is a high or low side current shunt and power monitor with an I2C > interface. The INA230 monitors both a shunt voltage drop and bus supply voltage. > > +The INA231 is a high or low side current shunt and power monitor with an I2C > +interface. The INA230 monitors both a shunt voltage drop and bus supply voltage. > + The INA231 ... I fixed this up and merged above two paragraphs into one. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Date: Thu, 15 Jan 2015 04:44:36 +0000 Subject: Re: [lm-sensors] [PATCH v2] hwmon: (ina2xx) Add ina231 compatible string Message-Id: <54B745B4.2040807@roeck-us.net> List-Id: References: <1421285699-8469-1-git-send-email-khilman@kernel.org> In-Reply-To: <1421285699-8469-1-git-send-email-khilman@kernel.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Kevin Hilman , lm-sensors@lm-sensors.org Cc: linux-samsung-soc@vger.kernel.org, DOCUMENTATION , Jonathan Corbet , open list , linaro-kernel@lists.linaro.org On 01/14/2015 05:34 PM, Kevin Hilman wrote: > From: Kevin Hilman > > Add support for "ina231" as compatible string, and update > Documentation and Kconfig accordingly. > > Tested with the Exynos5422-based odroid-xu3 board which has on-board > INA231 sensors. > > Signed-off-by: Kevin Hilman Applied to -next after minor cleanup (see below). > --- > Documentation/hwmon/ina2xx | 9 +++++++++ > drivers/hwmon/Kconfig | 4 ++-- > drivers/hwmon/ina2xx.c | 1 + > 3 files changed, 12 insertions(+), 2 deletions(-) > > diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx > index 4223c2d3b508..c2f838f65ee4 100644 > --- a/Documentation/hwmon/ina2xx > +++ b/Documentation/hwmon/ina2xx > @@ -26,6 +26,12 @@ Supported chips: > Datasheet: Publicly available at the Texas Instruments website > http://www.ti.com/ > > + * Texas Instruments INA231 > + Prefix: 'ina231' > + Addresses: I2C 0x40 - 0x4f > + Datasheet: Publicly available at the Texas Instruments website > + http://www.ti.com/ > + > Author: Lothar Felten > > Description > @@ -44,6 +50,9 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage. > The INA230 is a high or low side current shunt and power monitor with an I2C > interface. The INA230 monitors both a shunt voltage drop and bus supply voltage. > > +The INA231 is a high or low side current shunt and power monitor with an I2C > +interface. The INA230 monitors both a shunt voltage drop and bus supply voltage. > + The INA231 ... I fixed this up and merged above two paragraphs into one. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors