From: Peng Fan <B51431@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/3] ARM: imx fix register base address for i.MX6SX
Date: Thu, 15 Jan 2015 14:59:11 +0800 [thread overview]
Message-ID: <54B7653F.3000308@freescale.com> (raw)
In-Reply-To: <1421302953-2286-1-git-send-email-Peng.Fan@freescale.com>
Hi,
Please ignore this patch 1/3, since "imx: mx6: Fixed AIPS3 base address
issue" from Ye.Li already fix this.
Patch 2/3 and patch 3/3 are fine. Please review.
On 1/15/2015 2:22 PM, Peng Fan wrote:
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> ---
> arch/arm/include/asm/arch-mx6/imx-regs.h | 50 ++++++++++++++++----------------
> 1 file changed, 25 insertions(+), 25 deletions(-)
>
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index 5314298..44e31c9 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -277,31 +277,31 @@
> #define IP2APB_USBPHY2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x7C000)
>
> #ifdef CONFIG_MX6SX
> -#define GIS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x04000)
> -#define DCIC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x0C000)
> -#define DCIC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x10000)
> -#define CSI1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x14000)
> -#define PXP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x18000)
> -#define CSI2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x1C000)
> -#define LCDIF1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x20000)
> -#define LCDIF2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x24000)
> -#define VADC_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x28000)
> -#define VDEC_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x2C000)
> -#define SPBA_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x3C000)
> -#define AIPS3_CONFIG_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x7C000)
> -#define ADC1_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x80000)
> -#define ADC2_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x84000)
> -#define WDOG3_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x88000)
> -#define ECSPI5_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x8C000)
> -#define HS_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x90000)
> -#define MU_MCU_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x94000)
> -#define CANFD_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x98000)
> -#define MU_DSP_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0x9C000)
> -#define UART6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA0000)
> -#define PWM5_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA4000)
> -#define PWM6_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xA8000)
> -#define PWM7_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xAC000)
> -#define PWM8_BASE_ADDR (AIPS3_ARB_BASE_ADDR + 0xB0000)
> +#define GIS_BASE_ADDR (AIPS3_BASE_ADDR + 0x04000)
> +#define DCIC1_BASE_ADDR (AIPS3_BASE_ADDR + 0x0C000)
> +#define DCIC2_BASE_ADDR (AIPS3_BASE_ADDR + 0x10000)
> +#define CSI1_BASE_ADDR (AIPS3_BASE_ADDR + 0x14000)
> +#define PXP_BASE_ADDR (AIPS3_BASE_ADDR + 0x18000)
> +#define CSI2_BASE_ADDR (AIPS3_BASE_ADDR + 0x1C000)
> +#define LCDIF1_BASE_ADDR (AIPS3_BASE_ADDR + 0x20000)
> +#define LCDIF2_BASE_ADDR (AIPS3_BASE_ADDR + 0x24000)
> +#define VADC_BASE_ADDR (AIPS3_BASE_ADDR + 0x28000)
> +#define VDEC_BASE_ADDR (AIPS3_BASE_ADDR + 0x2C000)
> +#define SPBA_BASE_ADDR (AIPS3_BASE_ADDR + 0x3C000)
> +#define AIPS3_CONFIG_BASE_ADDR (AIPS3_BASE_ADDR + 0x7C000)
> +#define ADC1_BASE_ADDR (AIPS3_BASE_ADDR + 0x80000)
> +#define ADC2_BASE_ADDR (AIPS3_BASE_ADDR + 0x84000)
> +#define WDOG3_BASE_ADDR (AIPS3_BASE_ADDR + 0x88000)
> +#define ECSPI5_BASE_ADDR (AIPS3_BASE_ADDR + 0x8C000)
> +#define HS_BASE_ADDR (AIPS3_BASE_ADDR + 0x90000)
> +#define MU_MCU_BASE_ADDR (AIPS3_BASE_ADDR + 0x94000)
> +#define CANFD_BASE_ADDR (AIPS3_BASE_ADDR + 0x98000)
> +#define MU_DSP_BASE_ADDR (AIPS3_BASE_ADDR + 0x9C000)
> +#define UART6_BASE_ADDR (AIPS3_BASE_ADDR + 0xA0000)
> +#define PWM5_BASE_ADDR (AIPS3_BASE_ADDR + 0xA4000)
> +#define PWM6_BASE_ADDR (AIPS3_BASE_ADDR + 0xA8000)
> +#define PWM7_BASE_ADDR (AIPS3_BASE_ADDR + 0xAC000)
> +#define PWM8_BASE_ADDR (AIPS3_BASE_ADDR + 0xB0000)
> #endif
>
> #define CHIP_REV_1_0 0x10
Thanks,
Peng.
prev parent reply other threads:[~2015-01-15 6:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-15 6:22 [U-Boot] [PATCH 1/3] ARM: imx fix register base address for i.MX6SX Peng Fan
2015-01-15 6:22 ` [U-Boot] [PATCH 2/3] ARM: imx6: disable bandgap self-bias after boot Peng Fan
2015-02-17 9:51 ` Stefano Babic
2015-01-15 6:22 ` [U-Boot] [PATCH 3/3] ARM: imx6 Add WDOG3 for i.MX6SX Peng Fan
2015-02-17 9:52 ` Stefano Babic
2015-01-15 6:59 ` Peng Fan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54B7653F.3000308@freescale.com \
--to=b51431@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.