Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device

[Dmitry Tunin <hanipouspilot@gmail.com>]

Hi Marcel,

This patch is against git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git
Or is it another branch?

I pulled it again, but still no changes. Why it can be?

17.01.2015 07:32, Marcel Holtmann пишет:
> Hi Dmitry,
>
>> Add support of 13d3:3423 device.
>>
>> BugLink: https://bugs.launchpad.net/bugs/1411193
>>
>> ---
>>
>> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
>> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
>> P: Vendor=13d3 ProdID=3423 Rev= 0.01
>> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
>> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
>> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
>> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
>> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
>> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
>> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
>> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
>> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>>
>> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
>> Cc: stable@vger.kernel.org
>> ---
>> drivers/bluetooth/ath3k.c | 2 ++
>> drivers/bluetooth/btusb.c | 1 +
>> 2 files changed, 3 insertions(+)
>
> your patch does not apply cleanly:
>
> Applying: ath3k: Add support of AR3012 bluetooth 13d3:3423 device
> error: patch failed: drivers/bluetooth/ath3k.c:108
> error: drivers/bluetooth/ath3k.c: patch does not apply
> error: patch failed: drivers/bluetooth/btusb.c:189
> error: drivers/bluetooth/btusb.c: patch does not apply
> Patch failed at 0001 ath3k: Add support of AR3012 bluetooth 13d3:3423 device
>
> Please send patches that can be applied against bluetooth-next tree.
>
> Regards
>
> Marcel
>