From: Dmitry Tunin <hanipouspilot@gmail.com>
To: linux-bluetooth <linux-bluetooth@vger.kernel.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>, stable@vger.kernel.org
Subject: Re: [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device
Date: Sun, 18 Jan 2015 01:03:49 +0300 [thread overview]
Message-ID: <54BADC45.8080306@gmail.com> (raw)
In-Reply-To: <1421529317-25075-1-git-send-email-hanipouspilot@gmail.com>
> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3423 Rev= 0.01
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
> Cc: stable@vger.kernel.org
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+)
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index 1ee27ac..13a64d0 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -108,6 +108,7 @@ static const struct usb_device_id ath3k_table[] = {
> { USB_DEVICE(0x13d3, 0x3393) },
> { USB_DEVICE(0x13d3, 0x3402) },
> { USB_DEVICE(0x13d3, 0x3408) },
> + { USB_DEVICE(0x13d3, 0x3423) },
> { USB_DEVICE(0x13d3, 0x3432) },
>
> /* Atheros AR5BBU12 with sflash firmware */
> @@ -162,6 +163,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU22 with sflash firmware */
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 4a6495a..1211c74 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -189,6 +189,7 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
> { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
>
> /* Atheros AR5BBU12 with sflash firmware */
>
This was sent by a mistake, when trying to sort out the client.
v2 should be fine.
next prev parent reply other threads:[~2015-01-17 22:03 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-17 21:15 [PATCH] ath3k: Add support of AR3012 bluetooth 13d3:3423 device Dmitry Tunin
2015-01-17 22:03 ` Dmitry Tunin [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-01-16 21:45 Dmitry Tunin
2015-01-17 4:32 ` Marcel Holtmann
2015-01-17 8:26 ` Dmitry Tunin
2015-01-17 18:59 ` Marcel Holtmann
2015-01-17 19:57 ` Dmitry Tunin
2015-01-17 20:05 ` Marcel Holtmann
2015-01-17 16:40 ` Dmitry Tunin
2015-01-17 21:01 ` Dmitry Tunin
2015-01-18 10:57 ` Dmitry Tunin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54BADC45.8080306@gmail.com \
--to=hanipouspilot@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.