All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: "Ahmed S. Darwish" <darwish.07@gmail.com>,
	Olivier Sobrie <olivier@sobrie.be>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>,
	Wolfgang Grandegger <wg@grandegger.com>,
	"David S. Miller" <davem@davemloft.net>,
	Paul Gortmaker <paul.gortmaker@windriver.com>,
	Linux-CAN <linux-can@vger.kernel.org>,
	netdev <netdev@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family
Date: Sun, 18 Jan 2015 21:13:57 +0100	[thread overview]
Message-ID: <54BC1405.8010207@pengutronix.de> (raw)
In-Reply-To: <20150118201221.GA15143@linux>

[-- Attachment #1: Type: text/plain, Size: 2137 bytes --]

On 01/18/2015 09:12 PM, Ahmed S. Darwish wrote:
> Hi!
> 
> On Mon, Jan 12, 2015 at 02:53:02PM +0100, Olivier Sobrie wrote:
>> Hello,
>>
>> On Sun, Jan 11, 2015 at 03:36:12PM -0500, Ahmed S. Darwish wrote:
>>> From: Ahmed S. Darwish <ahmed.darwish@valeo.com>
>>>
> 
> ...
> 
>>> @@ -98,7 +128,13 @@
>>>  #define CMD_START_CHIP_REPLY		27
>>>  #define CMD_STOP_CHIP			28
>>>  #define CMD_STOP_CHIP_REPLY		29
>>> -#define CMD_GET_CARD_INFO2		32
>>> +#define CMD_READ_CLOCK			30
>>> +#define CMD_READ_CLOCK_REPLY		31
>>
>> These two defines are not used.
>>
> 
> They were added for completeness: the only gap in our continuous
> sequence of command IDs from 12 to 39 ;-) No big deal, to be
> removed in the next submission.
> 
> ...
> 
>>> +
>>> +struct kvaser_msg_tx_acknowledge_header {
>>> +	u8 channel;
>>> +	u8 tid;
>>> +};
>>
>> Is this struct really needed? Can't you simply use
>> leaf_msg_tx_acknowledge or usbcan_msg_tx_acknowledge
>> structures to read the header.
>> Same for kvaser_msg_rx_can_header.
>>
> 
> They're added to ensure type-safety throughout the code. Basically
> they're the common part of a command that has different wire format
> between the Leaf and the USBCan, but share a common header.  Such
> notation was only added when it was strictly necessary.
> 
> For example, there are three functions where 'rx_can_header' is
> referenced in the driver, and one function where 'tx_acknowledge_header'
> is referenced. Without such header structure, I'll have to sprinkle
> 3 to 4 extra blocks of:
> 
> 	switch (dev->family) {
> 	       case KVASER_LEAF: 
> 	       case KVASER_USBCAN:
> 	}
> 
> which would be _really_ ugly. The *_header notation ensures that, in
> the body of each function, we're accessing the fields in a very safe
> manner.

+1 Keep it as it is.

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2015-01-18 20:14 UTC|newest]

Thread overview: 98+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-23 15:46 [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Ahmed S. Darwish
2014-12-23 15:53 ` [PATCH] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-24 12:36   ` Olivier Sobrie
2014-12-24 15:04     ` Ahmed S. Darwish
2014-12-28 21:51       ` Olivier Sobrie
2014-12-30 15:33         ` Ahmed S. Darwish
2014-12-31 12:13           ` Olivier Sobrie
2014-12-24 12:31 ` [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Olivier Sobrie
2014-12-24 15:52   ` Ahmed S. Darwish
2014-12-24 23:56 ` [PATCH v2 1/4] " Ahmed S. Darwish
2014-12-24 23:59   ` [PATCH v2 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2014-12-25  0:02     ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2014-12-25  0:04       ` [PATCH v2 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-28 21:54       ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Olivier Sobrie
2014-12-25  2:50   ` [PATCH v2 1/4] can: kvaser_usb: Don't free packets when tight on URBs Greg KH
2014-12-25  9:38     ` Ahmed S. Darwish
2014-12-28 21:52   ` Olivier Sobrie
2015-01-01 21:59 ` [PATCH] " Stephen Hemminger
2015-01-03 14:34   ` Ahmed S. Darwish
2015-01-05 17:49 ` [PATCH v3 1/4] " Ahmed S. Darwish
2015-01-05 17:52   ` [PATCH v3 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2015-01-05 17:57     ` [PATCH v3 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2015-01-05 18:31       ` [PATCH v3 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-08 11:53         ` Marc Kleine-Budde
2015-01-08 15:19           ` Ahmed S. Darwish
2015-01-12 11:51             ` Marc Kleine-Budde
2015-01-12 12:26               ` Ahmed S. Darwish
2015-01-12 12:34                 ` Marc Kleine-Budde
2015-01-09  3:06           ` Ahmed S. Darwish
2015-01-09 14:05             ` Marc Kleine-Budde
2015-01-09 16:23               ` Oliver Hartkopp
2015-01-08  9:59   ` [PATCH v3 1/4] can: kvaser_usb: Don't free packets when tight on URBs Marc Kleine-Budde
2015-01-11 20:05 ` [PATCH v4 00/04] can: Introduce support for Kvaser USBCAN-II devices Ahmed S. Darwish
2015-01-11 20:11   ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() devices Ahmed S. Darwish
2015-01-11 20:15     ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Ahmed S. Darwish
2015-01-11 20:36       ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-11 20:45         ` [PATCH v4 4/4] can: kvaser_usb: Retry first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-11 20:51           ` Marc Kleine-Budde
2015-01-12 10:14             ` Ahmed S. Darwish
2015-01-12 10:25               ` Marc Kleine-Budde
2015-01-12 13:33               ` Olivier Sobrie
2015-01-12 13:50                 ` Ahmed S. Darwish
2015-01-12 11:20         ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-12 11:43         ` Marc Kleine-Budde
2015-01-12 12:07           ` Ahmed S. Darwish
2015-01-12 12:36             ` Ahmed S. Darwish
2015-01-12 13:53         ` Olivier Sobrie
2015-01-18 20:12           ` Ahmed S. Darwish
2015-01-18 20:13             ` Marc Kleine-Budde [this message]
2015-01-12 11:09       ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Marc Kleine-Budde
2015-01-12 20:36         ` Ahmed S. Darwish
2015-01-16 14:39           ` Marc Kleine-Budde
2015-01-16 15:50           ` Andri Yngvason
2015-01-18 20:33             ` Ahmed S. Darwish
2015-01-11 20:49     ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() Ahmed S. Darwish
2015-01-12 11:05       ` Marc Kleine-Budde
2015-01-20 21:44 ` [PATCH v5 1/5] can: kvaser_usb: Update net interface state before exiting on OOM Ahmed S. Darwish
2015-01-20 21:45   ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-20 21:47     ` [PATCH v5 3/5] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-20 21:48       ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-20 21:50         ` [PATCH v5 5/5] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-21 12:24         ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Sergei Shtylyov
2015-01-25 11:59           ` Ahmed S. Darwish
2015-01-21 10:33     ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-21 10:44       ` Marc Kleine-Budde
2015-01-21 11:00         ` Andri Yngvason
2015-01-21 11:53       ` Wolfgang Grandegger
2015-01-21 14:43         ` Ahmed S. Darwish
2015-01-21 15:00           ` Andri Yngvason
2015-01-21 15:36             ` Ahmed S. Darwish
2015-01-21 16:13               ` Wolfgang Grandegger
2015-01-23  6:07                 ` Ahmed S. Darwish
2015-01-23 10:32                   ` Andri Yngvason
2015-01-25  2:43                     ` Ahmed S. Darwish
2015-01-26 10:21                       ` Andri Yngvason
2015-01-21 16:37               ` Andri Yngvason
2015-01-21 16:20     ` Andri Yngvason
2015-01-21 22:59       ` Marc Kleine-Budde
2015-01-22 10:14         ` Andri Yngvason
2015-01-25  2:49           ` Ahmed S. Darwish
2015-01-25  3:21       ` Ahmed S. Darwish
2015-01-26  5:17 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Ahmed S. Darwish
2015-01-26  5:20   ` [PATCH v6 1/7] can: kvaser_usb: Do not sleep in atomic context Ahmed S. Darwish
2015-01-26  5:22     ` [PATCH v6 2/7] can: kvaser_usb: Send correct context to URB completion Ahmed S. Darwish
2015-01-26  5:24       ` [PATCH v6 3/7] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-26  5:25         ` [PATCH v6 4/7] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-26  5:27           ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Ahmed S. Darwish
2015-01-26  5:29             ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-26  5:33               ` [PATCH v6 7/7] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-26 10:34                 ` Andri Yngvason
2015-01-26 10:26               ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-26 10:28             ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Andri Yngvason
2015-01-26 10:50               ` Marc Kleine-Budde
2015-01-26 10:52                 ` Andri Yngvason
2015-01-26 10:53                   ` Marc Kleine-Budde
2015-01-26  9:55   ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Marc Kleine-Budde
2015-01-26 10:07   ` Marc Kleine-Budde
2015-01-26 10:56     ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54BC1405.8010207@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=darwish.07@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olivier@sobrie.be \
    --cc=paul.gortmaker@windriver.com \
    --cc=socketcan@hartkopp.net \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.