[U-Boot] [PATCH] arm: mx6: Add Barco platinum-picon and platinum-titanium

[Stefano Babic <sbabic@denx.de>]

On 10/12/2014 10:15, Stefan Roese wrote:
> This patch adds the new Barco platinum platform. It currently
> includes those two boards:
> 
> platinum-titanium
> -----------------
> This is the same board as the titanium that is already supported in
> mainline U-Boot. But its now moved to this new platform to support
> multiple "flavors" of imx6 boards in one directory. Its also moved
> to support SPL booting. And with this we use the run-time DDR
> configuration of this SPL support. The board is equipped with the
> Micron MT41J128M16JT-125 DDR chips. We now can remove the DDR
> related registers tuples from the imximage.cfg file. As all this
> is done in the SPL at run-time.
> 
> platinum-picon
> --------------
> This board is new and based on the MX6DL with 1GiB DDR using the
> Micron MT41K256M16HA DDR3 chips. Its also equipped with 2 NAND
> chips (each 512MiB).
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> Cc: Stefano Babic <sbabic@denx.de>
> Cc: Pieter Ronsijn <pieter.ronsijn@barco.com>
> ---

Applied to -u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================