diff for duplicates of <54BCDF50.2070702@redhat.com> diff --git a/a/1.txt b/N1/1.txt index 3f7d5b6..5435f58 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -10,7 +10,7 @@ On 19-01-15 11:02, Aleksei Mamlin wrote: > Board also have 2 expansion 70 pin headers. > > -> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> +> Signed-off-by: Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Thanks, we've recently moved over from using a full node hierarchy to using label references in board dts files, see e.g. : @@ -65,7 +65,7 @@ Hans > @@ -0,0 +1,192 @@ > +/* > + * Copyright 2015 Aleksei Mamlin -> + * Aleksei Mamlin <mamlinav@gmail.com> +> + * Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -122,23 +122,23 @@ Hans > + model = "HAOYU Electronics Marsboard A10"; > + compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10"; > + -> + soc at 01c00000 { -> + emac: ethernet at 01c0b000 { +> + soc@01c00000 { +> + emac: ethernet@01c0b000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&emac_pins_a>; > + phy = <&phy1>; > + status = "okay"; > + }; > + -> + mdio at 01c0b080 { +> + mdio@01c0b080 { > + status = "okay"; > + -> + phy1: ethernet-phy at 1 { +> + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > + }; > + -> + mmc0: mmc at 01c0f000 { +> + mmc0: mmc@01c0f000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; > + vmmc-supply = <®_vcc3v3>; @@ -148,34 +148,34 @@ Hans > + status = "okay"; > + }; > + -> + usbphy: phy at 01c13400 { +> + usbphy: phy@01c13400 { > + usb1_vbus-supply = <®_usb1_vbus>; > + usb2_vbus-supply = <®_usb2_vbus>; > + status = "okay"; > + }; > + -> + ehci0: usb at 01c14000 { +> + ehci0: usb@01c14000 { > + status = "okay"; > + }; > + -> + ohci0: usb at 01c14400 { +> + ohci0: usb@01c14400 { > + status = "okay"; > + }; > + -> + ahci: sata at 01c18000 { +> + ahci: sata@01c18000 { > + status = "okay"; > + }; > + -> + ehci1: usb at 01c1c000 { +> + ehci1: usb@01c1c000 { > + status = "okay"; > + }; > + -> + ohci1: usb at 01c1c400 { +> + ohci1: usb@01c1c400 { > + status = "okay"; > + }; > + -> + pinctrl at 01c20800 { -> + led_pins_marsboard: led_pins at 0 { +> + pinctrl@01c20800 { +> + led_pins_marsboard: led_pins@0 { > + allwinner,pins = "PB5", "PB6", "PB7", "PB8"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -183,37 +183,37 @@ Hans > + }; > + }; > + -> + uart0: serial at 01c28000 { +> + uart0: serial@01c28000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_a>; > + status = "okay"; > + }; > + -> + i2c0: i2c at 01c2ac00 { +> + i2c0: i2c@01c2ac00 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > + }; > + -> + i2c1: i2c at 01c2b000 { +> + i2c1: i2c@01c2b000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_pins_a>; > + status = "okay"; > + }; > + -> + spi0: spi at 01c05000 { +> + spi0: spi@01c05000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi0_pins_a>; > + status = "okay"; > + }; > + -> + spi1: spi at 01c06000 { +> + spi1: spi@01c06000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi1_pins_a>; > + status = "okay"; > + }; > + -> + spi2: spi at 01c17000 { +> + spi2: spi@01c17000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi2_pins_a>; > + status = "okay"; diff --git a/a/content_digest b/N1/content_digest index 5624cc8..92edba7 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,13 @@ "ref\01421661748-8390-1-git-send-email-mamlinav@gmail.com\0" - "From\0hdegoede@redhat.com (Hans de Goede)\0" - "Subject\0[linux-sunxi] [PATCH] ARM: dts: sun4i: Add Marsboard A10 board\0" + "ref\01421661748-8390-1-git-send-email-mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "From\0Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\0" + "Subject\0Re: [PATCH] ARM: dts: sun4i: Add Marsboard A10 board\0" "Date\0Mon, 19 Jan 2015 11:41:20 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org\0" + "Cc\0Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>" + Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> + linux-arm-kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> + " devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>\0" "\00:1\0" "b\0" "Hi,\n" @@ -17,7 +22,7 @@ "> Board also have 2 expansion 70 pin headers.\n" ">\n" ">\n" - "> Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>\n" + "> Signed-off-by: Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "\n" "Thanks, we've recently moved over from using a full node\n" "hierarchy to using label references in board dts files, see e.g. :\n" @@ -72,7 +77,7 @@ "> @@ -0,0 +1,192 @@\n" "> +/*\n" "> + * Copyright 2015 Aleksei Mamlin\n" - "> + * Aleksei Mamlin <mamlinav@gmail.com>\n" + "> + * Aleksei Mamlin <mamlinav-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -129,23 +134,23 @@ "> +\tmodel = \"HAOYU Electronics Marsboard A10\";\n" "> +\tcompatible = \"haoyu,a10-marsboard\", \"allwinner,sun4i-a10\";\n" "> +\n" - "> +\tsoc at 01c00000 {\n" - "> +\t\temac: ethernet at 01c0b000 {\n" + "> +\tsoc@01c00000 {\n" + "> +\t\temac: ethernet@01c0b000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&emac_pins_a>;\n" "> +\t\t\tphy = <&phy1>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tmdio at 01c0b080 {\n" + "> +\t\tmdio@01c0b080 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\n" - "> +\t\t\tphy1: ethernet-phy at 1 {\n" + "> +\t\t\tphy1: ethernet-phy@1 {\n" "> +\t\t\t\treg = <1>;\n" "> +\t\t\t};\n" "> +\t\t};\n" "> +\n" - "> +\t\tmmc0: mmc at 01c0f000 {\n" + "> +\t\tmmc0: mmc@01c0f000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;\n" "> +\t\t\tvmmc-supply = <®_vcc3v3>;\n" @@ -155,34 +160,34 @@ "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tusbphy: phy at 01c13400 {\n" + "> +\t\tusbphy: phy@01c13400 {\n" "> +\t\t\tusb1_vbus-supply = <®_usb1_vbus>;\n" "> +\t\t\tusb2_vbus-supply = <®_usb2_vbus>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tehci0: usb at 01c14000 {\n" + "> +\t\tehci0: usb@01c14000 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tohci0: usb at 01c14400 {\n" + "> +\t\tohci0: usb@01c14400 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tahci: sata at 01c18000 {\n" + "> +\t\tahci: sata@01c18000 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tehci1: usb at 01c1c000 {\n" + "> +\t\tehci1: usb@01c1c000 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tohci1: usb at 01c1c400 {\n" + "> +\t\tohci1: usb@01c1c400 {\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tpinctrl at 01c20800 {\n" - "> +\t\t\tled_pins_marsboard: led_pins at 0 {\n" + "> +\t\tpinctrl@01c20800 {\n" + "> +\t\t\tled_pins_marsboard: led_pins@0 {\n" "> +\t\t\t\tallwinner,pins = \"PB5\", \"PB6\", \"PB7\", \"PB8\";\n" "> +\t\t\t\tallwinner,function = \"gpio_out\";\n" "> +\t\t\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" @@ -190,37 +195,37 @@ "> +\t\t\t};\n" "> +\t\t};\n" "> +\n" - "> +\t\tuart0: serial at 01c28000 {\n" + "> +\t\tuart0: serial@01c28000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&uart0_pins_a>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\ti2c0: i2c at 01c2ac00 {\n" + "> +\t\ti2c0: i2c@01c2ac00 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&i2c0_pins_a>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\ti2c1: i2c at 01c2b000 {\n" + "> +\t\ti2c1: i2c@01c2b000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&i2c1_pins_a>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tspi0: spi at 01c05000 {\n" + "> +\t\tspi0: spi@01c05000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&spi0_pins_a>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tspi1: spi at 01c06000 {\n" + "> +\t\tspi1: spi@01c06000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&spi1_pins_a>;\n" "> +\t\t\tstatus = \"okay\";\n" "> +\t\t};\n" "> +\n" - "> +\t\tspi2: spi at 01c17000 {\n" + "> +\t\tspi2: spi@01c17000 {\n" "> +\t\t\tpinctrl-names = \"default\";\n" "> +\t\t\tpinctrl-0 = <&spi2_pins_a>;\n" "> +\t\t\tstatus = \"okay\";\n" @@ -264,4 +269,4 @@ "> +};\n" > -5b57b63a542ed47a46bf46a4c056e42e1eaa28eeffc3bced69498183a4413779 +e3a7f4679a9623d65eb03ba3e73bb0b57c1febe0ecee78585102772965d03429
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.