From: Ben Greear <greearb@candelatech.com>
To: Michal Kazior <michal.kazior@tieto.com>, ath10k@lists.infradead.org
Cc: martin@darmstadt.freifunk.net, linux-wireless@vger.kernel.org
Subject: Re: [RFC/RFT] ath10k: enable IBSS in multi-vif
Date: Mon, 19 Jan 2015 20:36:11 -0800 [thread overview]
Message-ID: <54BDDB3B.3020902@candelatech.com> (raw)
In-Reply-To: <1421658833-13311-1-git-send-email-michal.kazior@tieto.com>
On 01/19/2015 01:13 AM, Michal Kazior wrote:
> The 999.999.0.636 firmware seems to support
> concurrent IBSS + AP/STA. At least basic stuff
> works so enable it since some people are
> interested in this stuff.
>
> If it's broken we can fix, restrict or disable it
> later.
>
> Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
> ---
> Hi Martin,
>
> Feel free to take this patch and run whatever case
> you had in mind. If this proves to work for you
> without any major issues (like notorious crashes,
> traffic issues and such) I guess we could try
> pulling this upstream.
>
> Make sure you use 999.999.0.636 firmware. The 10.x
> doesn't support IBSS at all.
Likely my 10.1.467 based CT firmware will support this as well...
Ben
>
>
> drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
> index 9524bc5..11170ce 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -5032,6 +5032,10 @@ static const struct ieee80211_iface_limit ath10k_if_limits[] = {
> .max = 7,
> .types = BIT(NL80211_IFTYPE_AP)
> },
> + {
> + .max = 1,
> + .types = BIT(NL80211_IFTYPE_ADHOC)
> + },
> };
>
> static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = {
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
WARNING: multiple messages have this Message-ID (diff)
From: Ben Greear <greearb@candelatech.com>
To: Michal Kazior <michal.kazior@tieto.com>, ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, martin@darmstadt.freifunk.net
Subject: Re: [RFC/RFT] ath10k: enable IBSS in multi-vif
Date: Mon, 19 Jan 2015 20:36:11 -0800 [thread overview]
Message-ID: <54BDDB3B.3020902@candelatech.com> (raw)
In-Reply-To: <1421658833-13311-1-git-send-email-michal.kazior@tieto.com>
On 01/19/2015 01:13 AM, Michal Kazior wrote:
> The 999.999.0.636 firmware seems to support
> concurrent IBSS + AP/STA. At least basic stuff
> works so enable it since some people are
> interested in this stuff.
>
> If it's broken we can fix, restrict or disable it
> later.
>
> Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
> ---
> Hi Martin,
>
> Feel free to take this patch and run whatever case
> you had in mind. If this proves to work for you
> without any major issues (like notorious crashes,
> traffic issues and such) I guess we could try
> pulling this upstream.
>
> Make sure you use 999.999.0.636 firmware. The 10.x
> doesn't support IBSS at all.
Likely my 10.1.467 based CT firmware will support this as well...
Ben
>
>
> drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
> index 9524bc5..11170ce 100644
> --- a/drivers/net/wireless/ath/ath10k/mac.c
> +++ b/drivers/net/wireless/ath/ath10k/mac.c
> @@ -5032,6 +5032,10 @@ static const struct ieee80211_iface_limit ath10k_if_limits[] = {
> .max = 7,
> .types = BIT(NL80211_IFTYPE_AP)
> },
> + {
> + .max = 1,
> + .types = BIT(NL80211_IFTYPE_ADHOC)
> + },
> };
>
> static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = {
>
--
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc http://www.candelatech.com
next prev parent reply other threads:[~2015-01-20 4:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-16 20:59 Valid Interface Combinations: IBSS + AP in parallel? Martin Weinelt
2015-01-19 9:13 ` [RFC/RFT] ath10k: enable IBSS in multi-vif Michal Kazior
2015-01-19 9:13 ` Michal Kazior
2015-01-20 4:36 ` Ben Greear [this message]
2015-01-20 4:36 ` Ben Greear
2015-01-20 9:14 ` Yeoh Chun-Yeow
2015-01-20 9:14 ` Yeoh Chun-Yeow
2015-01-20 9:21 ` Michal Kazior
2015-01-20 9:21 ` Michal Kazior
2015-01-20 9:34 ` Yeoh Chun-Yeow
2015-01-20 9:34 ` Yeoh Chun-Yeow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54BDDB3B.3020902@candelatech.com \
--to=greearb@candelatech.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=martin@darmstadt.freifunk.net \
--cc=michal.kazior@tieto.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.