All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 01/26] dm: i2c: Provide an offset length parameter where needed
Date: Tue, 20 Jan 2015 07:28:03 +0100	[thread overview]
Message-ID: <54BDF573.4000307@denx.de> (raw)
In-Reply-To: <1421723575-4532-2-git-send-email-sjg@chromium.org>

Hello Simon,

Am 20.01.2015 04:12, schrieb Simon Glass:
> Rather than assuming that the chip offset length is 1, allow it to be
> provided. This allows chips that don't use the default offset length to
> be used (at present they are only supported by the command line 'i2c'
> command which sets the offset length explicitly).
>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> ---
>
> Changes in v2:
> - Add new patch to provide an offset length parameter where needed
>
>   arch/arm/cpu/tegra20-common/pmu.c         |  2 +-
>   board/avionic-design/common/tamonten-ng.c |  2 +-
>   board/nvidia/cardhu/cardhu.c              |  4 ++--
>   board/nvidia/dalmore/dalmore.c            |  4 ++--
>   board/nvidia/whistler/whistler.c          |  4 ++--
>   board/toradex/apalis_t30/apalis_t30.c     |  2 +-
>   common/cmd_i2c.c                          |  2 +-
>   drivers/i2c/i2c-uclass.c                  | 16 +++++++++-------
>   drivers/i2c/sandbox_i2c.c                 |  2 +-
>   drivers/power/as3722.c                    |  2 +-
>   include/i2c.h                             |  8 ++++++--
>   test/dm/i2c.c                             | 10 +++++-----
>   12 files changed, 32 insertions(+), 26 deletions(-)

Acked-by: Heiko Schocher <hs@denx.de>

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

  reply	other threads:[~2015-01-20  6:28 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-20  3:12 [U-Boot] [PATCH v2 0/26] dm: Add additional bus functionality Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 01/26] dm: i2c: Provide an offset length parameter where needed Simon Glass
2015-01-20  6:28   ` Heiko Schocher [this message]
2015-01-21 10:45   ` Masahiro Yamada
2015-01-21 16:12     ` Simon Glass
2015-01-21 18:34       ` Masahiro YAMADA
2015-01-22  8:03       ` Masahiro Yamada
2015-01-22 15:00         ` Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 02/26] dm: Don't run tests if U-Boot cannot be built Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 03/26] dm: core: Improve comments for uclass_first/next_device() Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 04/26] dm: core: Set device tree node for root device Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 05/26] dm: core: Tidy up error handling in device_bind() Simon Glass
2015-01-22  8:04   ` Masahiro Yamada
2015-01-20  3:12 ` [U-Boot] [PATCH v2 06/26] dm: core: Allocate platform data when binding a device Simon Glass
2015-01-23  9:20   ` Masahiro Yamada
2015-01-23 15:50     ` Simon Glass
2015-01-24  5:04       ` Masahiro YAMADA
2015-01-24 14:23         ` Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 07/26] dm: core: Allow parents to have platform data for their children Simon Glass
2015-01-22  7:45   ` Masahiro Yamada
2015-01-20  3:12 ` [U-Boot] [PATCH v2 08/26] dm: core: Allow uclasses to specific the platdata for a device's children Simon Glass
2015-01-22 10:25   ` Masahiro Yamada
2015-01-20  3:12 ` [U-Boot] [PATCH v2 09/26] dm: core: Add a post_bind method for parents Simon Glass
2015-01-23 12:42   ` Masahiro Yamada
2015-01-20  3:12 ` [U-Boot] [PATCH v2 10/26] dm: core: Add a function to get a device's uclass ID Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 11/26] dm: core: Add a flag to control sequence numbering Simon Glass
2015-01-22  9:50   ` Masahiro Yamada
2015-01-20  3:12 ` [U-Boot] [PATCH v2 12/26] dm: core: Allow uclasses to specific the private data for a device's children Simon Glass
2015-01-22 10:25   ` Masahiro Yamada
2015-01-22 14:58     ` Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 13/26] dm: spi: Move the per-child data size to the uclass Simon Glass
2015-01-22 10:30   ` Masahiro Yamada
2015-01-20  3:12 ` [U-Boot] [PATCH v2 14/26] dm: core: Allow the uclass to set up a device's child after binding Simon Glass
2015-01-22 11:45   ` Masahiro Yamada
2015-01-20  3:12 ` [U-Boot] [PATCH v2 15/26] dm: sandbox: sf: Tidy up the error handling in sandbox_sf_probe() Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 16/26] dm: core: Allow uclass to set up a device's child before it is probed Simon Glass
2015-01-22 11:45   ` Masahiro Yamada
2015-01-20  3:12 ` [U-Boot] [PATCH v2 17/26] dm: spi: Set up the spi_slave device pointer in child_pre_probe() Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 18/26] dm: spi: Move slave details to child platdata Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 19/26] dm: i2c: " Simon Glass
2015-01-23 12:32   ` Masahiro Yamada
2015-01-23 15:40     ` Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 20/26] dm: tegra: Drop unused COMPAT features for I2C, SPI Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 21/26] dm: exynos: Drop unused COMPAT features for SPI Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 22/26] dm: core: Ignore disabled devices when binding Simon Glass
2015-01-24  4:46   ` Masahiro YAMADA
2015-01-20  3:12 ` [U-Boot] [PATCH v2 23/26] dm: cros_ec: Don't require protocol 3 support Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 24/26] dm: cros_ec: Move cros_ec_i2c over to driver model Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 25/26] dm: cros_ec_spi: Remove old pre-driver-model code Simon Glass
2015-01-20  3:12 ` [U-Boot] [PATCH v2 26/26] dm: Update documentation for new bus features Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54BDF573.4000307@denx.de \
    --to=hs@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.