[U-Boot] [GIT PULL] Zynq SoC changes v2

[Michal Simek <monstr@monstr.eu>]

Hi Tom,

here is the second pull request for Zynq.
I have tested all patches by buildman(log below) with a kernel toolchain

[u-boot]$ arm-unknown-linux-gnueabi-gcc --version
arm-unknown-linux-gnueabi-gcc (GCC) 4.6.3
Copyright (C) 2011 Free Software Foundation, Inc.

I have put together that config.mk patch and enabling neon instructions.

I have also added that 2 patches for serial. Zynq is only platfrom
which is using this driver.

Thanks,
Michal

[u-boot]$ ./tools/buildman/buildman -b xnext/zynq zynq -sSe
boards.cfg is up to date. Nothing to do.
Summary of 15 commits for 7 boards (7 threads, 2 jobs per thread)
01: Prepare v2015.01
02: ARM: zynq: Enable the Neon instructions
       arm: (for 7/7 boards)  all +51.4  bss -0.6  rodata +20.0  spl/u-boot-spl:all +52.0  spl/u-boot-spl:rodata +20.0  spl/u-boot-spl:text +32.0  text +32.0
03: ARM: zynq: Remove empty line
04: ARM: zynq: ddrc: Setup half of memory only for ECC case
       arm: (for 7/7 boards)  all +12.6  bss +0.6  text +12.0
05: ARM: zynq: slcr: Dont modify the reserved bits
06: ARM: zynq: List nand, qspi and jtag boot modes
       arm: (for 7/7 boards)  spl/u-boot-spl:all +47.4  spl/u-boot-spl:text +47.4
07: ARM: zynq: List qspi, smc and nand baseaddresses
08: ARM: zynq: Show board information by default
       arm: (for 7/7 boards)  all +66.3  bss +2.3  data +4.0  rodata +20.0  text +40.0
09: ARM: zynq: Use CMD_FS_GENERIC
       arm: (for 7/7 boards)  all +972.0  bss -0.6  data +80.0  rodata +732.6  text +160.0
10: ARM: zynq: Group ethernet configuration options together
       arm: (for 7/7 boards)  all +26.3  bss +0.6  rodata +2.3  text +23.4
11: ARM: zynq: provide config option to select emio
12: ARM: zynq: Enable DFU functionality in zynq
       arm: (for 7/7 boards)  all +1804167.1  bss +1797574.9  data +181.7  rodata +822.0  text +5588.6
13: ARM: zynq: Add USB lthor download protocol support
       arm: (for 7/7 boards)  all +2383.7  bss +148.6  data +54.9  rodata +447.7  text +1732.6
14: serial: zynq: Use global baudrate instead of hardcoded one
       arm: (for 7/7 boards)  all -26.3  bss -2.3  rodata -8.0  spl/u-boot-spl:all -16.0  spl/u-boot-spl:rodata -8.0  spl/u-boot-spl:text -8.0  text -16.0
15: serial: Extend structure comments with register offset
(no errors to report)


The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368:

  Prepare v2015.01 (2015-01-12 09:39:08 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-microblaze.git zynq

for you to fetch changes up to a2425e6207d7c75906a15410f4c8c0a5d0519349:

  serial: Extend structure comments with register offset (2015-01-26 08:55:59 +0100)

----------------------------------------------------------------
Michal Simek (10):
      ARM: zynq: Enable the Neon instructions
      ARM: zynq: Remove empty line
      ARM: zynq: ddrc: Setup half of memory only for ECC case
      ARM: zynq: List nand, qspi and jtag boot modes
      ARM: zynq: List qspi, smc and nand baseaddresses
      ARM: zynq: Show board information by default
      ARM: zynq: Use CMD_FS_GENERIC
      ARM: zynq: Group ethernet configuration options together
      serial: zynq: Use global baudrate instead of hardcoded one
      serial: Extend structure comments with register offset

Siva Durga Prasad Paladugu (4):
      ARM: zynq: slcr: Dont modify the reserved bits
      ARM: zynq: provide config option to select emio
      ARM: zynq: Enable DFU functionality in zynq
      ARM: zynq: Add USB lthor download protocol support

 arch/arm/cpu/armv7/zynq/Makefile          |  1 +
 arch/arm/cpu/armv7/zynq/config.mk         |  7 +++++++
 arch/arm/cpu/armv7/zynq/cpu.c             |  4 ----
 arch/arm/cpu/armv7/zynq/ddrc.c            |  2 ++
 arch/arm/cpu/armv7/zynq/lowlevel_init.S   | 26 ++++++++++++++++++++++++++
 arch/arm/cpu/armv7/zynq/slcr.c            |  2 +-
 arch/arm/cpu/armv7/zynq/spl.c             |  9 +++++++++
 arch/arm/include/asm/arch-zynq/hardware.h |  5 +++++
 board/xilinx/zynq/board.c                 | 14 ++++++++++++--
 drivers/serial/serial_zynq.c              | 30 +++++++-----------------------
 include/configs/zynq-common.h             | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------
 11 files changed, 137 insertions(+), 40 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/zynq/config.mk
 create mode 100644 arch/arm/cpu/armv7/zynq/lowlevel_init.S

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150126/ac5be4a5/attachment.pgp>