From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 15/19] dm: powerpc: ppc4xx: Move glacier to use driver model for serial
Date: Mon, 26 Jan 2015 10:35:03 +0100 [thread overview]
Message-ID: <54C60A47.9040501@denx.de> (raw)
In-Reply-To: <54C60795.9030500@denx.de>
On 26.01.2015 10:23, Stefan Roese wrote:
>> diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig
>> index 0fc6877..cbc5ff9 100644
>> --- a/board/amcc/canyonlands/Kconfig
>> +++ b/board/amcc/canyonlands/Kconfig
>> @@ -29,4 +29,13 @@ config ARCHES
>>
>> endchoice
>>
>> +config DM
>> + default y
>> +
>> +config DM_SERIAL
>> + default y
>> +
>> +config SYS_MALLOC_F_LEN
>> + default 0x400
>> +
>
> Hmmm. This does not seem to work. With your patch series applied on
> current top-of-tree I get this error (for glacier_ramboot or
> canyonlands):
>
> $ make -s -j10
> board/amcc/canyonlands/Kconfig:38:warning: config symbol defined without type
> drivers/serial/serial-uclass.c:29:2: error: #error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work"
> make[1]: *** [drivers/serial/serial-uclass.o] Error 1
>
> Somehow the CONFIG_SYS_MALLOC_F_LEN define is not available in the
> .config used. Do you have any idea why it might be missing?
Okay. Found it. Its the missing type here. I'll send some follow-up
patches once I have all tested on canyonlands here.
Thanks,
Stefan
next prev parent reply other threads:[~2015-01-26 9:35 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-15 14:19 [U-Boot] [PATCH 0/19] powerpc: Introduce device tree control and driver model Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 01/19] Introduce board_init_f_mem() to handle early memory layout Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 02/19] powerpc: Permit device tree control of U-Boot (CONFIG_OF_CONTROL) Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 03/19] powerpc: ppc4xx: canyonlands: config: Tidy up CONFIGs and config.mk Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 04/19] powerpc: ppc4xx: Move CANYONLANDS/GLACIER/ARCHES to Kconfig Simon Glass
2015-01-06 7:29 ` Masahiro Yamada
2014-12-15 14:19 ` [U-Boot] [PATCH 05/19] powerpc: ppc4xx: Add ramboot config for glacier Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 06/19] WIP: powerpc: ppc4xx: Somehow BSS is not cleared in RAMBOOT case Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 07/19] powerpc: ppc4xx: canyonlands: Move to generic board Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 08/19] powerpc: ppc4xx: dts: Bring in canyonlands device tree files Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 09/19] powerpc: ppc4xx: Call board_init_f_mem() for generic board Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 10/19] powerpc: ppc4xx: Add a gpio.h header file Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 11/19] powerpc: ppc4xx: Allow the end of u-boot.bin to be found Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 12/19] powerpc: ppc4xx: Use CONFIG_OF_CONTROL for canyonlands boards Simon Glass
2015-01-26 13:17 ` Stefan Roese
2015-01-26 13:31 ` Simon Glass
2015-01-26 13:39 ` Bin Meng
2014-12-15 14:19 ` [U-Boot] [PATCH 13/19] ppc: amcc: Omit unneeded ns16550 CONFIG if using driver model Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 14/19] powerpc: Add serial driver for " Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 15/19] dm: powerpc: ppc4xx: Move glacier to use driver model for serial Simon Glass
2015-01-26 9:23 ` Stefan Roese
2015-01-26 9:35 ` Stefan Roese [this message]
2015-01-26 13:33 ` Simon Glass
2015-01-26 13:38 ` Stefan Roese
2014-12-15 14:19 ` [U-Boot] [PATCH 16/19] powerpc: Add linkage.h file Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 17/19] serial: Support an early UART for debugging Simon Glass
2014-12-16 4:38 ` Masahiro Yamada
2014-12-17 4:46 ` Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 18/19] serial: ns16550: Support debug UART Simon Glass
2014-12-16 4:39 ` Masahiro Yamada
2014-12-17 4:47 ` Simon Glass
2014-12-15 14:19 ` [U-Boot] [PATCH 19/19] powerpc: ppc4xx: Provide early debug UART defaults Simon Glass
2015-01-24 4:06 ` [U-Boot] [PATCH 0/19] powerpc: Introduce device tree control and driver model Simon Glass
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54C60A47.9040501@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.