Re: [PATCH 3.19.0-rc5 02/03] STAGING: Fix pcl818.c coding style issue: line over 80 characters

[Ian Abbott <abbotti@mev.co.uk>]

On 26/01/15 13:17, Simon Guo wrote:
> Correct one coding style problem(detected by checkpatch.pl) in pcl818.c.
> - line over 80 characters
>
> Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
> ---
>   drivers/staging/comedi/drivers/pcl818.c | 15 ++++++++++-----
>   1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
> index 5a005e5..bc8493f 100644
> --- a/drivers/staging/comedi/drivers/pcl818.c
> +++ b/drivers/staging/comedi/drivers/pcl818.c
> @@ -303,9 +303,11 @@ static const struct pcl818_board boardtypes[] = {
>
>   struct pcl818_private {
>   	struct comedi_isadma *dma;
> -	unsigned int ns_min;	/*  manimal allowed delay between samples (in us) for actual card */
> +	/*  manimal allowed delay between samples (in us) for actual card */
> +	unsigned int ns_min;
>   	int i8253_osc_base;	/*  1/frequency of on board oscilator in ns */
> -	unsigned int act_chanlist[16];	/*  MUX setting for actual AI operations */
> +	/*  MUX setting for actual AI operations */
> +	unsigned int act_chanlist[16];
>   	unsigned int act_chanlist_len;	/*  how long is actual MUX list */
>   	unsigned int act_chanlist_pos;	/*  actual position in MUX list */
>   	unsigned int divisor1;
> @@ -647,7 +649,8 @@ static int check_channel_list(struct comedi_device *dev,
>   				break;
>   			nowmustbechan =
>   			    (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
> -			if (nowmustbechan != CR_CHAN(chanlist[i])) {	/*  channel list isn't continuous :-( */
> +			if (nowmustbechan != CR_CHAN(chanlist[i])) {
> +				/*  channel list isn't continuous :-( */
>   				dev_dbg(dev->class_dev,
>   					"channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
>   					i, CR_CHAN(chanlist[i]), nowmustbechan,
> @@ -1153,8 +1156,10 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
>   	devpriv->ns_min = board->ns_min;
>
>   	if (!board->is_818) {
> -		if ((it->options[6] == 1) || (it->options[6] == 100))
> -			devpriv->ns_min = 10000;	/* extended PCL718 to 100kHz DAC */
> +		if ((it->options[6] == 1) || (it->options[6] == 100)) {
> +			/* extended PCL718 to 100kHz DAC */
> +			devpriv->ns_min = 10000;
> +		}
>   	}
>
>   	pcl818_reset(dev);
>

Reviewed-by: Ian Abbott <abbotti@mev.co.uk>

-- 
-=( Ian Abbott @ MEV Ltd.    E-mail: <abbotti@mev.co.uk> )=-
-=(                          Web: http://www.mev.co.uk/  )=-