All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3] xen/arm: split the init_xen_time() in 2 parts
@ 2015-01-27 18:59 Oleksandr Tyshchenko
  2015-01-27 22:23 ` Julien Grall
  0 siblings, 1 reply; 3+ messages in thread
From: Oleksandr Tyshchenko @ 2015-01-27 18:59 UTC (permalink / raw)
  To: xen-devel; +Cc: julien.grall, tim, ian.campbell, stefano.stabellini

Create preinit_xen_time() and move to it minimum required
subset of operations needed to properly initialized
cpu_khz and boot_count vars. This is allow us to use udelay()
immediately after the call.

Signed-off-by: Oleksandr Tyshchenko <oleksandr.tyshchenko@globallogic.com>
CC: Julien Grall <julien.grall@linaro.org>

---
Changes in v2:
1. Move timer_ids out of the find_timer_node() and frop this func.
2. Use void as a return value for preinit_xen_time().
3. Move platform_init() before calling preinit_xen_time().

Changes in v3:
1. Store the device node for timer outside the funcs.

---
 xen/arch/arm/setup.c   |  6 ++++--
 xen/arch/arm/time.c    | 57 ++++++++++++++++++++++++++++----------------------
 xen/include/xen/time.h |  1 +
 3 files changed, 37 insertions(+), 27 deletions(-)

diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index f49569d..a916ca6 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -743,6 +743,10 @@ void __init start_xen(unsigned long boot_phys_offset,
 
     init_IRQ();
 
+    platform_init();
+
+    preinit_xen_time();
+
     dt_uart_init();
     console_init_preirq();
     console_init_ring();
@@ -751,8 +755,6 @@ void __init start_xen(unsigned long boot_phys_offset,
 
     processor_id();
 
-    platform_init();
-
     smp_init_cpus();
     cpus = smp_get_max_cpus();
 
diff --git a/xen/arch/arm/time.c b/xen/arch/arm/time.c
index 0add494..04291f9 100644
--- a/xen/arch/arm/time.c
+++ b/xen/arch/arm/time.c
@@ -61,56 +61,63 @@ unsigned int timer_get_irq(enum timer_ppi ppi)
     return muldiv64(ns, 1000 * cpu_khz, SECONDS(1));
 }
 
-/* Set up the timer on the boot CPU */
-int __init init_xen_time(void)
+static __initdata struct dt_device_node *timer;
+
+/* Set up the timer on the boot CPU (early init function) */
+void __init preinit_xen_time(void)
 {
     static const struct dt_device_match timer_ids[] __initconst =
     {
         DT_MATCH_TIMER,
         { /* sentinel */ },
     };
-    struct dt_device_node *dev;
     int res;
-    unsigned int i;
     u32 rate;
 
-    dev = dt_find_matching_node(NULL, timer_ids);
-    if ( !dev )
+    timer = dt_find_matching_node(NULL, timer_ids);
+    if ( !timer )
         panic("Unable to find a compatible timer in the device tree");
 
-    dt_device_set_used_by(dev, DOMID_XEN);
+    dt_device_set_used_by(timer, DOMID_XEN);
+
+    res = platform_init_time();
+    if ( res )
+        panic("Timer: Cannot initialize platform timer");
+
+    res = dt_property_read_u32(timer, "clock-frequency", &rate);
+    if ( res )
+        cpu_khz = rate / 1000;
+    else
+        cpu_khz = READ_SYSREG32(CNTFRQ_EL0) / 1000;
+
+    boot_count = READ_SYSREG64(CNTPCT_EL0);
+}
+
+/* Set up the timer on the boot CPU (late init function) */
+int __init init_xen_time(void)
+{
+    int res;
+    unsigned int i;
 
     /* Retrieve all IRQs for the timer */
     for ( i = TIMER_PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++ )
     {
-        res = platform_get_irq(dev, i);
+        res = platform_get_irq(timer, i);
 
         if ( res < 0 )
             panic("Timer: Unable to retrieve IRQ %u from the device tree", i);
         timer_irq[i] = res;
     }
 
-    printk("Generic Timer IRQ: phys=%u hyp=%u virt=%u\n",
-           timer_irq[TIMER_PHYS_NONSECURE_PPI],
-           timer_irq[TIMER_HYP_PPI],
-           timer_irq[TIMER_VIRT_PPI]);
-
-    res = platform_init_time();
-    if ( res )
-        panic("Timer: Cannot initialize platform timer");
-
     /* Check that this CPU supports the Generic Timer interface */
     if ( !cpu_has_gentimer )
         panic("CPU does not support the Generic Timer v1 interface");
 
-    res = dt_property_read_u32(dev, "clock-frequency", &rate);
-    if ( res )
-        cpu_khz = rate / 1000;
-    else
-        cpu_khz = READ_SYSREG32(CNTFRQ_EL0) / 1000;
-
-    boot_count = READ_SYSREG64(CNTPCT_EL0);
-    printk("Using generic timer at %lu KHz\n", cpu_khz);
+    printk("Generic Timer IRQ: phys=%u hyp=%u virt=%u Freq: %lu KHz\n",
+           timer_irq[TIMER_PHYS_NONSECURE_PPI],
+           timer_irq[TIMER_HYP_PPI],
+           timer_irq[TIMER_VIRT_PPI],
+           cpu_khz);
 
     return 0;
 }
diff --git a/xen/include/xen/time.h b/xen/include/xen/time.h
index 709501f..bb6259d 100644
--- a/xen/include/xen/time.h
+++ b/xen/include/xen/time.h
@@ -12,6 +12,7 @@
 #include <public/xen.h>
 
 extern int init_xen_time(void);
+void preinit_xen_time(void);
 extern void cstate_restore_tsc(void);
 
 extern unsigned long cpu_khz;
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-01-28 10:23 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-01-27 18:59 [PATCH v3] xen/arm: split the init_xen_time() in 2 parts Oleksandr Tyshchenko
2015-01-27 22:23 ` Julien Grall
2015-01-28 10:23   ` Oleksandr Tyshchenko

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.