Re: [PATCH net-next] drivers: net: cpsw: make cpsw_ale.c a module to allow re-use on Keystone

[Murali Karicheri <m-karicheri2@ti.com>]

On 01/29/2015 06:47 PM, Arnd Bergmann wrote:
> On Thursday 29 January 2015 18:15:51 Murali Karicheri wrote:
>> NetCP on Keystone has cpsw ale function similar to other TI SoCs
>> and this driver is re-used. To allow both ti cpsw and keystone netcp
>> to re-use the driver, convert the cpsw ale to a module and configure
>> it through Kconfig option CONFIG_TI_CPSW_ALE. Currently it is statically
>> linked to both TI CPSW and NetCP and this causes issues when the above
>> drivers are built as dynamic modules. This patch addresses this issue
>>
>> While at it, fix the Makefile and code to build both netcp_core and
>> netcp_ethss as dynamic modules. This is needed to support arm allmodconfig.
>> This also requires exporting of API calls provided by netcp_core so that
>> both the above can be dynamic modules.
>>
>> Signed-off-by: Murali Karicheri<m-karicheri2@ti.com>
>> ---
>>   drivers/net/ethernet/ti/Kconfig       |   19 +++++++++++++++++--
>>   drivers/net/ethernet/ti/Makefile      |    8 +++++---
>>   drivers/net/ethernet/ti/cpsw_ale.c    |   26 ++++++++++++++++++++++++--
>>   drivers/net/ethernet/ti/netcp_core.c  |    8 ++++++++
>>   drivers/net/ethernet/ti/netcp_ethss.c |    5 +++++
>>   5 files changed, 59 insertions(+), 7 deletions(-)
>
> I was hoping there would be a way without exporting all those symbols, but
> I also couldn't come up with a better solution. I'm putting this into the
> randconfig build test for now, but I'm guessing it's fine.
>
> Unless you hear something else from me tomorrow after the tests are through:
>
> Acked-by: Arnd Bergmann<arnd@arndb.de>
Arnd,

Oops! I think I have send v1 too soon with your Ack. Sorry for that. 
Hope nothing shows up bad in your test.

-- 
Murali Karicheri
Linux Kernel, Texas Instruments