From: David Ahern <dsahern@gmail.com>
To: netdev@vger.kernel.org
Cc: Hannes Frederic Sowa <hannes@redhat.com>
Subject: Re: [PATCH] net: ipv6: Make address flushing on ifdown optional - v2
Date: Mon, 02 Feb 2015 08:33:51 -0700 [thread overview]
Message-ID: <54CF98DF.9090308@gmail.com> (raw)
In-Reply-To: <1422504065-17445-1-git-send-email-dsahern@gmail.com>
Hi Hannes:
Any comments before I spin a v3 to address Dave's comments?
David
On 1/28/15 9:01 PM, David Ahern wrote:
> Currently, all ipv6 addresses are flushed when the interface is configured
> down, even static address:
>
> [root@f20 ~]# ip -6 addr add dev eth1 2000:11:1:1::1/64
> [root@f20 ~]# ip addr show dev eth1
> 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
> link/ether 02:04:11:22:33:01 brd ff:ff:ff:ff:ff:ff
> inet6 2000:11:1:1::1/64 scope global tentative
> valid_lft forever preferred_lft forever
> [root@f20 ~]# ip link set dev eth1 up
> [root@f20 ~]# ip link set dev eth1 down
> [root@f20 ~]# ip addr show dev eth1
> 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
> link/ether 02:04:11:22:33:01 brd ff:ff:ff:ff:ff:ff
>
> Add a new sysctl to make this behavior optional. The new setting defaults to
> flush all addresses to maintain backwards compatibility. When the setting is
> reset static addresses are not flushed:
>
> [root@f20 ~]# echo 0 > /proc/sys/net/ipv6/conf/eth1/flush_addr_on_down
> [root@f20 ~]# ip -6 addr add dev eth1 2000:11:1:1::1/64
> [root@f20 ~]# ip addr show dev eth1
> 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
> link/ether 02:04:11:22:33:01 brd ff:ff:ff:ff:ff:ff
> inet6 2000:11:1:1::1/64 scope global tentative
> valid_lft forever preferred_lft forever
> [root@f20 ~]# ip link set dev eth1 up
> [root@f20 ~]# ip link set dev eth1 down
> [root@f20 ~]# ip addr show dev eth1
> 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
> link/ether 02:04:11:22:33:01 brd ff:ff:ff:ff:ff:ff
> inet6 2000:11:1:1::1/64 scope global
> valid_lft forever preferred_lft forever
> inet6 fe80::4:11ff:fe22:3301/64 scope link
> valid_lft forever preferred_lft forever
>
> v2:
> - only keep static addresses as suggested by Hannes
> - added new managed flag to track configured addresses
> - on ifdown do not remove from configured address from inet6_addr_lst
> - on ifdown reset the TENTATIVE flag and set state to DAD so that DAD is
> redone when link is brought up again
>
> Suggested-by: Hannes Frederic Sowa <hannes@redhat.com>
> Signed-off-by: David Ahern <dsahern@gmail.com>
> Cc: Hannes Frederic Sowa <hannes@redhat.com>
>
> Signed-off-by: David Ahern <dsahern@gmail.com>
> ---
> include/linux/ipv6.h | 1 +
> include/net/if_inet6.h | 1 +
> include/uapi/linux/ipv6.h | 1 +
> net/ipv6/addrconf.c | 55 ++++++++++++++++++++++++++++++++++++++---------
> 4 files changed, 48 insertions(+), 10 deletions(-)
>
> diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
> index 2805062c013f..b91b7c8be023 100644
> --- a/include/linux/ipv6.h
> +++ b/include/linux/ipv6.h
> @@ -53,6 +53,7 @@ struct ipv6_devconf {
> __s32 ndisc_notify;
> __s32 suppress_frag_ndisc;
> __s32 accept_ra_mtu;
> + __s32 flush_addr_on_down;
> void *sysctl;
> };
>
> diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
> index 98e5f9578f86..3b6323111f77 100644
> --- a/include/net/if_inet6.h
> +++ b/include/net/if_inet6.h
> @@ -72,6 +72,7 @@ struct inet6_ifaddr {
> int regen_count;
>
> bool tokenized;
> + bool managed;
>
> struct rcu_head rcu;
> struct in6_addr peer_addr;
> diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h
> index 437a6a4b125a..ed10d4ba8340 100644
> --- a/include/uapi/linux/ipv6.h
> +++ b/include/uapi/linux/ipv6.h
> @@ -170,6 +170,7 @@ enum {
> DEVCONF_ACCEPT_RA_FROM_LOCAL,
> DEVCONF_USE_OPTIMISTIC,
> DEVCONF_ACCEPT_RA_MTU,
> + DEVCONF_FLUSH_ON_DOWN,
> DEVCONF_MAX
> };
>
> diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
> index 7dcc065e2160..e0e82aad2116 100644
> --- a/net/ipv6/addrconf.c
> +++ b/net/ipv6/addrconf.c
> @@ -202,6 +202,7 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = {
> .accept_dad = 1,
> .suppress_frag_ndisc = 1,
> .accept_ra_mtu = 1,
> + .flush_addr_on_down = 1,
> };
>
> static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
> @@ -240,6 +241,7 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
> .accept_dad = 1,
> .suppress_frag_ndisc = 1,
> .accept_ra_mtu = 1,
> + .flush_addr_on_down = 1,
> };
>
> /* Check if a valid qdisc is available */
> @@ -870,6 +872,7 @@ ipv6_add_addr(struct inet6_dev *idev, const struct in6_addr *addr,
> ifa->prefered_lft = prefered_lft;
> ifa->cstamp = ifa->tstamp = jiffies;
> ifa->tokenized = false;
> + ifa->managed = false;
>
> ifa->rt = rt;
>
> @@ -2510,6 +2513,8 @@ static int inet6_addr_add(struct net *net, int ifindex,
> valid_lft, prefered_lft);
>
> if (!IS_ERR(ifp)) {
> + ifp->managed = true;
> +
> if (!(ifa_flags & IFA_F_NOPREFIXROUTE)) {
> addrconf_prefix_route(&ifp->addr, ifp->prefix_len, dev,
> expires, flags);
> @@ -3032,8 +3037,9 @@ static int addrconf_ifdown(struct net_device *dev, int how)
> {
> struct net *net = dev_net(dev);
> struct inet6_dev *idev;
> - struct inet6_ifaddr *ifa;
> + struct inet6_ifaddr *ifa, *tmp;
> int state, i;
> + struct list_head del_list;
>
> ASSERT_RTNL();
>
> @@ -3067,9 +3073,12 @@ static int addrconf_ifdown(struct net_device *dev, int how)
> restart:
> hlist_for_each_entry_rcu(ifa, h, addr_lst) {
> if (ifa->idev == idev) {
> - hlist_del_init_rcu(&ifa->addr_lst);
> addrconf_del_dad_work(ifa);
> - goto restart;
> + if (how || idev->cnf.flush_addr_on_down ||
> + !ifa->managed) {
> + hlist_del_init_rcu(&ifa->addr_lst);
> + goto restart;
> + }
> }
> }
> spin_unlock_bh(&addrconf_hash_lock);
> @@ -3103,14 +3112,35 @@ restart:
> write_lock_bh(&idev->lock);
> }
>
> - while (!list_empty(&idev->addr_list)) {
> - ifa = list_first_entry(&idev->addr_list,
> + INIT_LIST_HEAD(&del_list);
> + list_for_each_entry_safe(ifa, tmp, &idev->addr_list, if_list) {
> + /*
> + * on NETDEV_DOWN events do not flush managed (user configured)
> + * addresses unless configured to do so. If the address is not
> + * deleted reset flags and state such that DAD is re-done on a
> + * subsequent link up.
> + */
> + if (!how && !idev->cnf.flush_addr_on_down && ifa->managed) {
> + if (!(ifa->flags & IFA_F_NODAD)) {
> + ifa->flags |= IFA_F_TENTATIVE;
> + ifa->state = INET6_IFADDR_STATE_DAD;
> + }
> + } else {
> + list_del(&ifa->if_list);
> + list_add(&ifa->if_list, &del_list);
> + }
> + }
> +
> + write_unlock_bh(&idev->lock);
> +
> + while (!list_empty(&del_list)) {
> + ifa = list_first_entry(&del_list,
> struct inet6_ifaddr, if_list);
> +
> addrconf_del_dad_work(ifa);
>
> list_del(&ifa->if_list);
>
> - write_unlock_bh(&idev->lock);
>
> spin_lock_bh(&ifa->state_lock);
> state = ifa->state;
> @@ -3122,12 +3152,8 @@ restart:
> inet6addr_notifier_call_chain(NETDEV_DOWN, ifa);
> }
> in6_ifa_put(ifa);
> -
> - write_lock_bh(&idev->lock);
> }
>
> - write_unlock_bh(&idev->lock);
> -
> /* Step 5: Discard anycast and multicast list */
> if (how) {
> ipv6_ac_destroy_dev(idev);
> @@ -4383,6 +4409,7 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
> array[DEVCONF_SUPPRESS_FRAG_NDISC] = cnf->suppress_frag_ndisc;
> array[DEVCONF_ACCEPT_RA_FROM_LOCAL] = cnf->accept_ra_from_local;
> array[DEVCONF_ACCEPT_RA_MTU] = cnf->accept_ra_mtu;
> + array[DEVCONF_FLUSH_ON_DOWN] = cnf->flush_addr_on_down;
> }
>
> static inline size_t inet6_ifla6_size(void)
> @@ -5269,6 +5296,14 @@ static struct addrconf_sysctl_table
> .proc_handler = proc_dointvec,
> },
> {
> + .procname = "flush_addr_on_down",
> + .data = &ipv6_devconf.flush_addr_on_down,
> + .maxlen = sizeof(int),
> + .mode = 0644,
> + .proc_handler = proc_dointvec,
> +
> + },
> + {
> /* sentinel */
> }
> },
>
next prev parent reply other threads:[~2015-02-02 15:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-29 4:01 [PATCH] net: ipv6: Make address flushing on ifdown optional - v2 David Ahern
2015-02-01 1:17 ` David Miller
2015-02-02 15:33 ` David Ahern [this message]
2015-02-02 17:38 ` Brian Haley
2015-02-02 23:10 ` Stephen Hemminger
2015-02-03 0:11 ` David Ahern
2015-02-03 0:18 ` Stephen Hemminger
2015-02-03 17:27 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54CF98DF.9090308@gmail.com \
--to=dsahern@gmail.com \
--cc=hannes@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.