From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [RFC 3/4] toolchain-externel: mass-define actual source tarball for known patterns
Date: Mon, 02 Feb 2015 22:57:27 +0100 [thread overview]
Message-ID: <54CFF2C7.50706@mind.be> (raw)
In-Reply-To: <1420199015-16907-4-git-send-email-luca@lucaceresoli.net>
On 02/01/15 12:43, Luca Ceresoli wrote:
> For some externel toolchain vendors the actual source code URL can be simply
> derived from the binary file URL.
>
> Here we obtain TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL for all Mentor and
> Linaro toolchains with a few $(subst) calls.
>
> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
> Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
> ---
> toolchain/toolchain-external/toolchain-external.mk | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/toolchain/toolchain-external/toolchain-external.mk b/toolchain/toolchain-external/toolchain-external.mk
> index b07b16c..91edd4a 100644
> --- a/toolchain/toolchain-external/toolchain-external.mk
> +++ b/toolchain/toolchain-external/toolchain-external.mk
> @@ -392,6 +392,14 @@ TOOLCHAIN_EXTERNAL_SITE = $(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
> TOOLCHAIN_EXTERNAL_SOURCE = $(notdir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL)))
> endif
>
> +# Some toolchain vendors have a regular file naming pattern.
> +# For them, mass-define _ACTUAL_SOURCE_TARBALL based _SITE.
I actually think we should refactor the external toolchains to factor out these
common parts of the SITE and SOURCE, but that's for another day :-)
> +ifneq ($(findstring sourcery.mentor.com/public/gnu_toolchain,$(TOOLCHAIN_EXTERNAL_SITE)),)
> +TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL ?= $(subst -i686-pc-linux-gnu.tar.bz2,.src.tar.bz2,$(subst -i686-pc-linux-gnu-i386-linux.tar.bz2,-i686-pc-linux-gnu.src.tar.bz2,$(TOOLCHAIN_EXTERNAL_SOURCE)))
More importantly: could you split this huge line? Make removes all whitespace
at the beginning of the line after a backslash-newline, so there is no reason
not to split it.
> +else ifneq ($(findstring http://releases.linaro.org,$(TOOLCHAIN_EXTERNAL_SITE)),)
> +TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL ?= $(subst _linux.tar.xz,_src.tar.bz2,$(TOOLCHAIN_EXTERNAL_SOURCE))
Same here.
Regards,
Arnout
> +endif
> +
> # In fact, we don't need to download the toolchain, since it is already
> # available on the system, so force the site and source to be empty so
> # that nothing will be downloaded/extracted.
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
next prev parent reply other threads:[~2015-02-02 21:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-02 11:43 [Buildroot] [RFC 0/4] legal-info: save the external-toolchain source archive Luca Ceresoli
2015-01-02 11:43 ` [Buildroot] [RFC 1/4] legal-info: remove FOO_MANIFEST_TARBALL and FOO_MANIFEST_SITE defaults Luca Ceresoli
2015-02-02 21:28 ` Arnout Vandecappelle
2015-02-02 21:49 ` Peter Korsgaard
2015-01-02 11:43 ` [Buildroot] [RFC 2/4] legal-info: allow to declare the actual sources for binary packages Luca Ceresoli
2015-02-02 21:47 ` Arnout Vandecappelle
2015-02-02 21:49 ` Arnout Vandecappelle
2015-02-05 13:44 ` Luca Ceresoli
2015-04-21 14:54 ` Luca Ceresoli
2015-01-02 11:43 ` [Buildroot] [RFC 3/4] toolchain-externel: mass-define actual source tarball for known patterns Luca Ceresoli
2015-02-02 21:57 ` Arnout Vandecappelle [this message]
2015-01-02 11:43 ` [Buildroot] [RFC 4/4] toolchain-external: define actual sources for arago toolchains Luca Ceresoli
2015-02-02 21:58 ` Arnout Vandecappelle
2015-02-02 21:24 ` [Buildroot] [RFC 0/4] legal-info: save the external-toolchain source archive Arnout Vandecappelle
2015-02-05 13:25 ` Luca Ceresoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54CFF2C7.50706@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.