Re: [PATCH 09/14] drm/exynos: atomic phase 1: add .mode_set_nofb() callback

[Joonyoung Shim <jy0922.shim@samsung.com>]

Hi,

On 02/04/2015 04:14 AM, Gustavo Padovan wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> 
> The new atomic infrastructure needs the .mode_set_nofb() callback to
> update CRTC timings before setting any plane.
> 
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> 
> Conflicts:
> 	drivers/gpu/drm/exynos/exynos_drm_crtc.c
> ---
>  drivers/gpu/drm/exynos/exynos_drm_crtc.c | 55 +++++++-------------------------
>  1 file changed, 11 insertions(+), 44 deletions(-)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> index be36cca..17b64f8 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> @@ -81,53 +81,19 @@ exynos_drm_crtc_mode_fixup(struct drm_crtc *crtc,
>  	return true;
>  }
>  
> -static int
> -exynos_drm_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
> -			  struct drm_display_mode *adjusted_mode, int x, int y,
> -			  struct drm_framebuffer *old_fb)
> -{
> -	struct drm_framebuffer *fb = crtc->primary->fb;
> -	unsigned int crtc_w;
> -	unsigned int crtc_h;
> -	int ret;
> -
> -	ret = exynos_check_plane(crtc->primary, fb);
> -	if (ret < 0)
> -		return ret;
> -
> -	crtc_w = fb->width - x;
> -	crtc_h = fb->height - y;
> -	exynos_plane_mode_set(crtc->primary, crtc, fb, 0, 0,
> -			      crtc_w, crtc_h, x, y, crtc_w, crtc_h);
> -
> -	return 0;
> -}
> -
> -static int exynos_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
> -					  struct drm_framebuffer *old_fb)
> +static void
> +exynos_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
>  {
>  	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
> -	struct drm_framebuffer *fb = crtc->primary->fb;
> -	unsigned int crtc_w;
> -	unsigned int crtc_h;
> -	int ret;
> +	struct drm_display_mode *adjusted_mode;
>  
> -	/* when framebuffer changing is requested, crtc's dpms should be on */
> -	if (exynos_crtc->dpms > DRM_MODE_DPMS_ON) {
> -		DRM_ERROR("failed framebuffer changing request.\n");
> -		return -EPERM;
> -	}
> -
> -	ret = exynos_check_plane(crtc->primary, fb);
> -	if (ret)
> -		return ret;
> +	if (WARN_ON(!crtc->state))
> +		return;
>  
> -	crtc_w = fb->width - x;
> -	crtc_h = fb->height - y;
> -	exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
> -			    crtc_w, crtc_h, x, y, crtc_w, crtc_h);
> +	adjusted_mode = &crtc->state->adjusted_mode;
>  
> -	return 0;
> +	if (exynos_crtc->ops->commit)
> +		exynos_crtc->ops->commit(exynos_crtc);

This already should be executed by .commit of struct
drm_crtc_helper_funcs, not here.

Thanks.

>  }
>  
>  static void exynos_drm_crtc_disable(struct drm_crtc *crtc)
> @@ -184,8 +150,9 @@ static struct drm_crtc_helper_funcs exynos_crtc_helper_funcs = {
>  	.prepare	= exynos_drm_crtc_prepare,
>  	.commit		= exynos_drm_crtc_commit,
>  	.mode_fixup	= exynos_drm_crtc_mode_fixup,
> -	.mode_set	= exynos_drm_crtc_mode_set,
> -	.mode_set_base	= exynos_drm_crtc_mode_set_base,
> +	.mode_set	= drm_helper_crtc_mode_set,
> +	.mode_set_nofb	= exynos_drm_crtc_mode_set_nofb,
> +	.mode_set_base	= drm_helper_crtc_mode_set_base,
>  	.disable	= exynos_drm_crtc_disable,
>  	.atomic_begin	= exynos_crtc_atomic_begin,
>  	.atomic_flush	= exynos_crtc_atomic_flush,
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel