From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from resqmta-po-08v.sys.comcast.net ([96.114.154.167]:59932 "EHLO resqmta-po-08v.sys.comcast.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751611AbbBHCPl (ORCPT ); Sat, 7 Feb 2015 21:15:41 -0500 Message-ID: <54D6C6CB.6060904@nwtrail.com> Date: Sat, 07 Feb 2015 18:15:39 -0800 From: Paul Johnson Reply-To: pjay@nwtrail.com MIME-Version: 1.0 To: Yinghai Lu CC: Bjorn Helgaas , linux-pci Subject: Re: [problem] mpt2sas load fails with LSISAS2008 References: <54C81B4E.7060900@nwtrail.com> <54CBB062.4040801@nwtrail.com> <54CFBC0E.4080102@nwtrail.com> <54D160B5.70006@nwtrail.com> In-Reply-To: Content-Type: multipart/mixed; boundary="------------030805080809080404030206" Sender: linux-pci-owner@vger.kernel.org List-ID: This is a multi-part message in MIME format. --------------030805080809080404030206 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit On 02/07/2015 03:34 PM, Yinghai Lu wrote: > On Tue, Feb 3, 2015 at 3:58 PM, Paul Johnson wrote: >> On 02/02/2015 02:30 PM, Yinghai Lu wrote: >>> >> This patch worked. In case you have a need, the dmesg is attached. > > Please check two patches instead. You need to apply those two at the same time > on current linus tree. > > Thanks > > Yinghai > The patches did not work. dmesg attached. Interesting discussion about LSI cards. I have wondered what other people are running into with this card/chip. It has been around awhile. Thanks for your efforts. Paul --------------030805080809080404030206 Content-Type: text/plain; charset=UTF-8; name="dmesg-3.19.0-rc7-patch03" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-3.19.0-rc7-patch03" [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.19.0-rc7-patch03 (paulj@x1404ubu64) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #6 SMP Sat Feb 7 16:40:57 PST 2015 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-rc7-patch03 root=UUID=f604b748-aeb8-4e3d-953f-b5a8b947c191 ro debug ignore_loglevel [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ef7dffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ef7e0000-0x00000000ef7e1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ef7e2000-0x00000000ef7effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ef7f0000-0x00000000ef7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040fffffff] usable [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. P55-UD3L/P55-UD3L, BIOS F7 06/23/2010 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] AGP: No AGP bridge found [ 0.000000] e820: last_pfn = 0x410000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0F0000000 mask FF0000000 uncachable [ 0.000000] 2 base 100000000 mask F00000000 write-back [ 0.000000] 3 base 200000000 mask E00000000 write-back [ 0.000000] 4 base 300000000 mask F00000000 write-back [ 0.000000] 5 base 400000000 mask FF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3840MB, range: 256MB, type UC [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 8GB, type WB [ 0.000000] reg 4, base: 12GB, range: 4GB, type WB [ 0.000000] reg 5, base: 16GB, range: 256MB, type WB [ 0.000000] total RAM covered: 16384M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 512M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB [ 0.000000] reg 1, base: 3840MB, range: 256MB, type UC [ 0.000000] reg 2, base: 4GB, range: 4GB, type WB [ 0.000000] reg 3, base: 8GB, range: 8GB, type WB [ 0.000000] reg 4, base: 16GB, range: 512MB, type WB [ 0.000000] reg 5, base: 16640MB, range: 256MB, type UC [ 0.000000] e820: update [mem 0xf0000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xef7e0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f55c0-0x000f55cf] mapped at [ffff8800000f55c0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01f2b000, 0x01f2bfff] PGTABLE [ 0.000000] BRK [0x01f2c000, 0x01f2cfff] PGTABLE [ 0.000000] BRK [0x01f2d000, 0x01f2dfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40fe00000-0x40fffffff] [ 0.000000] [mem 0x40fe00000-0x40fffffff] page 2M [ 0.000000] BRK [0x01f2e000, 0x01f2efff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x400000000-0x40fdfffff] [ 0.000000] [mem 0x400000000-0x40fdfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3ffffffff] [ 0.000000] [mem 0x3e0000000-0x3ffffffff] page 2M [ 0.000000] BRK [0x01f2f000, 0x01f2ffff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0xef7dffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xef5fffff] page 2M [ 0.000000] [mem 0xef600000-0xef7dffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3dfffffff] [ 0.000000] [mem 0x100000000-0x3dfffffff] page 2M [ 0.000000] BRK [0x01f30000, 0x01f30fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x36284000-0x37139fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6F80 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x00000000EF7E2040 000040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x00000000EF7E20C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x00000000EF7E2180 00529E (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x00000000EF7E0000 000040 [ 0.000000] ACPI: HPET 0x00000000EF7E7580 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x00000000EF7E7600 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: EUDS 0x00000000EF7E7640 000560 (v01 GBT 00000000 00000000) [ 0.000000] ACPI: TAMG 0x00000000EF7E7BA0 000892 (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 0x00000000EF7E7480 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x00000000EF7E8440 0036C4 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000040fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x40ffee000-0x40fff1fff] [ 0.000000] [ffffea0000000000-ffffea00103fffff] PMD -> [ffff8803ff600000-ffff88040f5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x40fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009bfff] [ 0.000000] node 0: [mem 0x00100000-0xef7dffff] [ 0.000000] node 0: [mem 0x100000000-0x40fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x40fffffff] [ 0.000000] On node 0 totalpages: 4192123 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 15264 pages used for memmap [ 0.000000] DMA32 zone: 976864 pages, LIFO batch:31 [ 0.000000] Normal zone: 50176 pages used for memmap [ 0.000000] Normal zone: 3211264 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xef7e0000-0xef7e1fff] [ 0.000000] PM: Registered nosave memory: [mem 0xef7e2000-0xef7effff] [ 0.000000] PM: Registered nosave memory: [mem 0xef7f0000-0xef7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xef800000-0xf3ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff] [ 0.000000] e820: [mem 0xf8000000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88040fc00000 s80448 r8192 d30144 u262144 [ 0.000000] pcpu-alloc: s80448 r8192 d30144 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4126598 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.19.0-rc7-patch03 root=UUID=f604b748-aeb8-4e3d-953f-b5a8b947c191 ro debug ignore_loglevel [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] AGP: Checking aperture... [ 0.000000] AGP: No AGP bridge found [ 0.000000] Memory: 16408344K/16768492K available (6805K kernel code, 1055K rwdata, 3272K rodata, 1212K init, 940K bss, 360148K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS:16640 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2797.854 MHz processor [ 0.000025] Calibrating delay loop (skipped), value calculated using timer frequency.. 5595.70 BogoMIPS (lpj=11191416) [ 0.000030] pid_max: default: 32768 minimum: 301 [ 0.000035] ACPI: Core revision 20141107 [ 0.003966] ACPI: All ACPI Tables successfully acquired [ 0.007329] Security Framework initialized [ 0.007342] AppArmor: AppArmor initialized [ 0.008188] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.011176] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.012582] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.012601] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.012843] Initializing cgroup subsys devices [ 0.012848] Initializing cgroup subsys freezer [ 0.012851] Initializing cgroup subsys net_cls [ 0.012854] Initializing cgroup subsys blkio [ 0.012857] Initializing cgroup subsys perf_event [ 0.012873] CPU: Physical Processor ID: 0 [ 0.012875] CPU: Processor Core ID: 0 [ 0.012880] mce: CPU supports 9 MCE banks [ 0.012888] CPU0: Thermal monitoring enabled (TM1) [ 0.012897] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.012897] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.012970] Freeing SMP alternatives memory: 24K (ffffffff81e38000 - ffffffff81e3e000) [ 0.012974] ftrace: allocating 26468 entries in 104 pages [ 0.024081] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063767] smpboot: CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz (fam: 06, model: 1e, stepping: 05) [ 0.169464] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver. [ 0.169479] perf_event_intel: CPU erratum AAJ80 worked around [ 0.169481] perf_event_intel: CPUID marked event: 'bus cycles' unavailable [ 0.169484] ... version: 3 [ 0.169485] ... bit width: 48 [ 0.169487] ... generic registers: 4 [ 0.169488] ... value mask: 0000ffffffffffff [ 0.169490] ... max period: 000000007fffffff [ 0.169492] ... fixed-purpose events: 3 [ 0.169493] ... event mask: 000000070000000f [ 0.169995] x86: Booting SMP configuration: [ 0.169998] .... node #0, CPUs: #1 [ 0.183216] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.183291] #2 #3 #4 #5 #6 #7 [ 0.262494] x86: Booted up 1 node, 8 CPUs [ 0.262501] smpboot: Total of 8 processors activated (44765.66 BogoMIPS) [ 0.267328] devtmpfs: initialized [ 0.271571] evm: security.selinux [ 0.271573] evm: security.SMACK64 [ 0.271575] evm: security.capability [ 0.271618] PM: Registering ACPI NVS region [mem 0xef7e0000-0xef7e1fff] (8192 bytes) [ 0.271819] RTC time: 1:53:19, date: 02/08/15 [ 0.271904] NET: Registered protocol family 16 [ 0.281458] cpuidle: using governor ladder [ 0.291135] cpuidle: using governor menu [ 0.291188] ACPI: bus type PCI registered [ 0.291191] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.291254] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.291259] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.291315] PCI: Using configuration type 1 for base access [ 0.300740] ACPI: Added _OSI(Module Device) [ 0.300743] ACPI: Added _OSI(Processor Device) [ 0.300745] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.300746] ACPI: Added _OSI(Processor Aggregator Device) [ 0.304919] ACPI: Interpreter enabled [ 0.304926] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) [ 0.304931] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) [ 0.304943] ACPI: (supports S0 S3 S4 S5) [ 0.304945] ACPI: Using IOAPIC for interrupt routing [ 0.304964] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.308368] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.308374] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.308379] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.308559] PCI host bridge to bus 0000:00 [ 0.308563] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.308566] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.308568] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.308570] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.308573] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.308575] pci_bus 0000:00: root bus resource [mem 0xef800000-0xfebfffff] [ 0.308584] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000 [ 0.308678] pci 0000:00:03.0: [8086:d138] type 01 class 0x060400 [ 0.308728] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.308790] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000 [ 0.308875] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000 [ 0.308960] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000 [ 0.309042] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000 [ 0.309120] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000 [ 0.309191] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000 [ 0.309278] pci 0000:00:1a.0: [8086:3b3b] type 00 class 0x0c0300 [ 0.309317] pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f] [ 0.309381] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.309415] pci 0000:00:1a.1: [8086:3b3e] type 00 class 0x0c0300 [ 0.309453] pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f] [ 0.309521] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.309555] pci 0000:00:1a.2: [8086:3b3f] type 00 class 0x0c0300 [ 0.309593] pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f] [ 0.309656] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.309697] pci 0000:00:1a.7: [8086:3b3c] type 00 class 0x0c0320 [ 0.309717] pci 0000:00:1a.7: reg 0x10: [mem 0xfbfff000-0xfbfff3ff] [ 0.309800] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.309837] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.309874] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300 [ 0.309890] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit] [ 0.309958] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.309994] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.310027] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400 [ 0.310095] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.310133] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.310166] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400 [ 0.310233] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.310269] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.310308] pci 0000:00:1d.0: [8086:3b36] type 00 class 0x0c0300 [ 0.310347] pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f] [ 0.310411] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.310444] pci 0000:00:1d.1: [8086:3b37] type 00 class 0x0c0300 [ 0.310483] pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f] [ 0.310546] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.310578] pci 0000:00:1d.2: [8086:3b38] type 00 class 0x0c0300 [ 0.310617] pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f] [ 0.310680] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.310713] pci 0000:00:1d.3: [8086:3b39] type 00 class 0x0c0300 [ 0.310751] pci 0000:00:1d.3: reg 0x20: [io 0xf900-0xf91f] [ 0.310815] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.310857] pci 0000:00:1d.7: [8086:3b34] type 00 class 0x0c0320 [ 0.310877] pci 0000:00:1d.7: reg 0x10: [mem 0xfbffe000-0xfbffe3ff] [ 0.310961] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.310998] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.311030] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.311102] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.311138] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100 [ 0.311294] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601 [ 0.311311] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807] [ 0.311319] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703] [ 0.311326] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607] [ 0.311334] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503] [ 0.311341] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf41f] [ 0.311349] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffd000-0xfbffd7ff] [ 0.311392] pci 0000:00:1f.2: PME# supported from D3hot [ 0.311455] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500 [ 0.311469] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit] [ 0.311488] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.311596] pci 0000:01:00.0: [1000:0072] type 00 class 0x010700 [ 0.311607] pci 0000:01:00.0: reg 0x10: [io 0xce00-0xceff] [ 0.311617] pci 0000:01:00.0: reg 0x14: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 0.311627] pci 0000:01:00.0: reg 0x1c: [mem 0xfbd80000-0xfbdbffff 64bit] [ 0.311639] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.311680] pci 0000:01:00.0: supports D1 D2 [ 0.311702] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.311711] pci 0000:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.317464] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.317468] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.317471] pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.317551] pci 0000:02:00.0: [197b:2363] type 00 class 0x010601 [ 0.317638] pci 0000:02:00.0: reg 0x24: [mem 0xfbcfe000-0xfbcfffff] [ 0.317706] pci 0000:02:00.0: PME# supported from D3hot [ 0.317765] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185 [ 0.317789] pci 0000:02:00.1: reg 0x10: [io 0xef00-0xef07] [ 0.317803] pci 0000:02:00.1: reg 0x14: [io 0xee00-0xee03] [ 0.317816] pci 0000:02:00.1: reg 0x18: [io 0xed00-0xed07] [ 0.317829] pci 0000:02:00.1: reg 0x1c: [io 0xec00-0xec03] [ 0.317843] pci 0000:02:00.1: reg 0x20: [io 0xeb00-0xeb0f] [ 0.317949] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.317960] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.317964] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.317968] pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.318034] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.318053] pci 0000:03:00.0: reg 0x10: [io 0xde00-0xdeff] [ 0.318080] pci 0000:03:00.0: reg 0x18: [mem 0xfbeff000-0xfbefffff 64bit pref] [ 0.318098] pci 0000:03:00.0: reg 0x20: [mem 0xfbef8000-0xfbefbfff 64bit pref] [ 0.318110] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.318189] pci 0000:03:00.0: supports D1 D2 [ 0.318191] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.325468] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.325473] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.325477] pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.325482] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.325524] pci 0000:04:04.0: [102b:051b] type 00 class 0x030000 [ 0.325537] pci 0000:04:04.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 0.325546] pci 0000:04:04.0: reg 0x14: [mem 0xfb7fc000-0xfb7fffff] [ 0.325556] pci 0000:04:04.0: reg 0x18: [mem 0xfa800000-0xfaffffff] [ 0.325586] pci 0000:04:04.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.325652] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.325658] pci 0000:00:1e.0: bridge window [mem 0xfa800000-0xfb7fffff] [ 0.325663] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.325666] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.325669] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.325672] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.325675] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.325678] pci 0000:00:1e.0: bridge window [mem 0xef800000-0xfebfffff] (subtractive decode) [ 0.326128] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.326171] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.326213] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.326255] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 0.326296] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.326338] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) [ 0.326380] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.326421] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.326553] vgaarb: setting as boot device: PCI:0000:04:04.0 [ 0.326556] vgaarb: device added: PCI:0000:04:04.0,decodes=io+mem,owns=io+mem,locks=none [ 0.326559] vgaarb: loaded [ 0.326560] vgaarb: bridge control possible 0000:04:04.0 [ 0.326710] SCSI subsystem initialized [ 0.326744] libata version 3.00 loaded. [ 0.326765] ACPI: bus type USB registered [ 0.326780] usbcore: registered new interface driver usbfs [ 0.326789] usbcore: registered new interface driver hub [ 0.326807] usbcore: registered new device driver usb [ 0.326903] PCI: Using ACPI for IRQ routing [ 0.328200] PCI: Discovered peer bus 3f [ 0.328202] PCI: root bus 3f: using default resources [ 0.328204] PCI: Probing PCI hardware (bus 3f) [ 0.328227] PCI host bridge to bus 0000:3f [ 0.328230] pci_bus 0000:3f: root bus resource [io 0x0000-0xffff] [ 0.328232] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff] [ 0.328235] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff] [ 0.328238] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.328244] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000 [ 0.328281] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000 [ 0.328318] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000 [ 0.328352] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000 [ 0.328388] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000 [ 0.328422] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000 [ 0.328457] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000 [ 0.328492] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000 [ 0.328526] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000 [ 0.328561] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000 [ 0.328595] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000 [ 0.328631] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000 [ 0.328665] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000 [ 0.328699] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000 [ 0.328733] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000 [ 0.328778] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f [ 0.328781] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-3f]) [ 0.328786] PCI: pci_cache_line_size set to 64 bytes [ 0.328854] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff] [ 0.328856] e820: reserve RAM buffer [mem 0xef7e0000-0xefffffff] [ 0.328944] NetLabel: Initializing [ 0.328946] NetLabel: domain hash size = 128 [ 0.328947] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.328959] NetLabel: unlabeled traffic allowed by default [ 0.329019] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.329026] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.329032] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.331069] hpet: hpet2 irq 24 for MSI [ 0.331104] hpet: hpet3 irq 25 for MSI [ 0.331143] hpet: hpet4 irq 26 for MSI [ 0.331178] hpet: hpet5 irq 27 for MSI [ 0.331215] hpet: hpet6 irq 28 for MSI [ 0.331303] Switched to clocksource hpet [ 0.335557] AppArmor: AppArmor Filesystem Enabled [ 0.335607] pnp: PnP ACPI init [ 0.335735] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.335739] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.335741] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.335744] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.335746] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.335750] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.335802] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.336011] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.336175] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.336255] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.336305] system 00:05: [io 0x0400-0x047f] could not be reserved [ 0.336308] system 00:05: [io 0x0580-0x05ff] has been reserved [ 0.336311] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.336457] system 00:06: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.336461] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.336568] pnp 00:07: disabling [mem 0x000f0000-0x000f3fff] because it overlaps 0000:01:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit] [ 0.336572] pnp 00:07: disabling [mem 0x000f4000-0x000f7fff] because it overlaps 0000:01:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit] [ 0.336576] pnp 00:07: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:01:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit] [ 0.336580] pnp 00:07: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:01:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit] [ 0.336584] pnp 00:07: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:01:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit] [ 0.336587] pnp 00:07: disabling [mem 0x00100000-0xef7dffff] because it overlaps 0000:01:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit] [ 0.336591] pnp 00:07: disabling [mem 0x000e0000-0x000effff] because it overlaps 0000:01:00.0 BAR 9 [mem 0x00000000-0x003fffff 64bit] [ 0.336615] system 00:07: [mem 0xef7e0000-0xef7effff] could not be reserved [ 0.336618] system 00:07: [mem 0xef7f0000-0xef7fffff] has been reserved [ 0.336621] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.336623] system 00:07: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.336626] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.336628] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.336631] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.336633] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved [ 0.336637] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.336644] pnp: PnP ACPI: found 8 devices [ 0.343101] pci_bus 0000:00: max bus depth: 1 pci_try_num: 2 [ 0.343132] pci 0000:00:1c.0: BAR 15: assigned [mem 0xef800000-0xef9fffff 64bit pref] [ 0.343142] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.343151] pci 0000:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.343159] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.343162] pci 0000:01:00.0: BAR 6: assigned [mem 0xfbd00000-0xfbd7ffff pref] [ 0.343171] pci 0000:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.343174] pci 0000:01:00.0: BAR 9: no space for [mem size 0x00400000 64bit] [ 0.343177] pci 0000:01:00.0: BAR 9: failed to assign [mem size 0x00400000 64bit] [ 0.343186] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.343189] pci 0000:01:00.0: BAR 7: no space for [mem size 0x00040000 64bit] [ 0.343191] pci 0000:01:00.0: BAR 7: failed to assign [mem size 0x00040000 64bit] [ 0.343194] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.343197] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.343201] pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.343207] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.343210] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.343215] pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.343219] pci 0000:00:1c.0: bridge window [mem 0xef800000-0xef9fffff 64bit pref] [ 0.343225] pci 0000:03:00.0: BAR 6: assigned [mem 0xfbb00000-0xfbb1ffff pref] [ 0.343228] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.343231] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.343236] pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.343240] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.343246] pci 0000:04:04.0: BAR 6: assigned [mem 0xfb000000-0xfb00ffff pref] [ 0.343249] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.343254] pci 0000:00:1e.0: bridge window [mem 0xfa800000-0xfb7fffff] [ 0.343258] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.343264] pci_bus 0000:00: No. 2 try to assign unassigned res [ 0.343266] release child resource [mem 0xfbd00000-0xfbd7ffff pref] [ 0.343268] release child resource [mem 0xfbd80000-0xfbdbffff 64bit] [ 0.343270] release child resource [mem 0xfbdfc000-0xfbdfffff 64bit] [ 0.343272] pci 0000:00:03.0: resource 14 [mem 0xfbd00000-0xfbdfffff] released [ 0.343275] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.343283] pci 0000:00:03.0: bridge window [mem 0x00100000-0x001fffff] to [bus 01] add_size 500000 [ 0.343302] pci 0000:00:03.0: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 500000 [ 0.343312] pci 0000:00:03.0: BAR 14: assigned [mem 0xefa00000-0xefffffff] [ 0.343321] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.343330] pci 0000:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.343338] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.343341] pci 0000:01:00.0: res[9]=[mem size 0x00000000 64bit] get_res_add_size add_size 400000 [ 0.343344] pci 0000:01:00.0: res[7]=[mem size 0x00000000 64bit] get_res_add_size add_size 40000 [ 0.343348] pci 0000:01:00.0: BAR 6: assigned [mem 0xefa00000-0xefa7ffff pref] [ 0.343356] pci 0000:01:00.0: reg 0x17c: [mem 0x00000000-0x0003ffff 64bit] [ 0.343359] pci 0000:01:00.0: BAR 9: assigned [mem 0xefa80000-0xefe7ffff 64bit] [ 0.343372] pci 0000:01:00.0: reg 0x174: [mem 0x00000000-0x00003fff 64bit] [ 0.343375] pci 0000:01:00.0: BAR 7: assigned [mem 0xefe80000-0xefebffff 64bit] [ 0.343381] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.343384] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.343388] pci 0000:00:03.0: bridge window [mem 0xefa00000-0xefffffff] [ 0.343394] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.343397] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.343402] pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.343406] pci 0000:00:1c.0: bridge window [mem 0xef800000-0xef9fffff 64bit pref] [ 0.343412] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.343415] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.343420] pci 0000:00:1c.1: bridge window [mem 0xfbb00000-0xfbbfffff] [ 0.343424] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.343429] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.343434] pci 0000:00:1e.0: bridge window [mem 0xfa800000-0xfb7fffff] [ 0.343438] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.343444] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.343446] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.343449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.343451] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.343453] pci_bus 0000:00: resource 8 [mem 0xef800000-0xfebfffff] [ 0.343456] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.343458] pci_bus 0000:01: resource 1 [mem 0xefa00000-0xefffffff] [ 0.343460] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.343463] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.343465] pci_bus 0000:02: resource 2 [mem 0xef800000-0xef9fffff 64bit pref] [ 0.343468] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.343470] pci_bus 0000:03: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 0.343472] pci_bus 0000:03: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.343475] pci_bus 0000:04: resource 1 [mem 0xfa800000-0xfb7fffff] [ 0.343478] pci_bus 0000:04: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.343480] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.343482] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.343485] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.343487] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff] [ 0.343489] pci_bus 0000:04: resource 8 [mem 0xef800000-0xfebfffff] [ 0.343493] pci_bus 0000:3f: resource 4 [io 0x0000-0xffff] [ 0.343495] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff] [ 0.343518] NET: Registered protocol family 2 [ 0.343699] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.344025] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.344281] TCP: Hash tables configured (established 131072 bind 65536) [ 0.344302] TCP: reno registered [ 0.344318] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.344424] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.344551] NET: Registered protocol family 1 [ 0.375400] pci 0000:04:04.0: Video device with shadowed ROM [ 0.375418] PCI: CLS 64 bytes, default 64 [ 0.375455] Trying to unpack rootfs image as initramfs... [ 0.597226] Freeing initrd memory: 15064K (ffff880036284000 - ffff88003713a000) [ 0.597253] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.597256] software IO TLB [mem 0xeb7e0000-0xef7e0000] (64MB) mapped at [ffff8800eb7e0000-ffff8800ef7dffff] [ 0.597562] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x4 [ 0.597569] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x4 [ 0.597576] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x4 [ 0.597583] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x4 [ 0.597590] microcode: CPU4 sig=0x106e5, pf=0x2, revision=0x4 [ 0.597597] microcode: CPU5 sig=0x106e5, pf=0x2, revision=0x4 [ 0.597603] microcode: CPU6 sig=0x106e5, pf=0x2, revision=0x4 [ 0.597609] microcode: CPU7 sig=0x106e5, pf=0x2, revision=0x4 [ 0.597667] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.597692] Scanning for low memory corruption every 60 seconds [ 0.598017] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.598061] audit: initializing netlink subsys (disabled) [ 0.598073] audit: type=2000 audit(1423360399.492:1): initialized [ 0.598282] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.599599] VFS: Disk quotas dquot_6.5.2 [ 0.599634] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.599905] fuse init (API version 7.23) [ 0.600399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.600404] io scheduler noop registered [ 0.600406] io scheduler deadline registered (default) [ 0.600432] io scheduler cfq registered [ 0.600824] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.600838] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.600863] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 0.600865] vesafb: scrolling: redraw [ 0.600867] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.600879] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90005b80000, using 3072k, total 3072k [ 0.719438] Console: switching to colour frame buffer device 128x48 [ 0.839335] fb0: VESA VGA frame buffer device [ 0.840339] intel_idle: MWAIT substates: 0x1120 [ 0.841349] intel_idle: v0.4 model 0x1E [ 0.842196] intel_idle: lapic_timer_reliable_states 0x2 [ 0.843587] ipmi message handler version 39.2 [ 0.844605] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.846456] ACPI: Power Button [PWRB] [ 0.847298] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.848940] ACPI: Power Button [PWRF] [ 0.850667] GHES: HEST is not enabled! [ 0.851546] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.873333] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.876328] Linux agpgart interface v0.103 [ 0.878313] brd: module loaded [ 0.879526] loop: module loaded [ 0.880539] libphy: Fixed MDIO Bus: probed [ 0.881511] tun: Universal TUN/TAP device driver, 1.6 [ 0.882626] tun: (C) 1999-2004 Max Krasnyansky [ 0.884034] PPP generic driver version 2.4.2 [ 0.885017] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.886463] ehci-pci: EHCI PCI platform driver [ 0.887546] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 0.888706] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.937542] ehci-pci 0000:00:1a.7: debug port 2 [ 0.990477] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 1.039642] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfbfff000 [ 1.099367] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.147067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.195124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.243122] usb usb1: Product: EHCI Host Controller [ 1.290793] usb usb1: Manufacturer: Linux 3.19.0-rc7-patch03 ehci_hcd [ 1.338674] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.386091] hub 1-0:1.0: USB hub found [ 1.432940] hub 1-0:1.0: 6 ports detected [ 1.479307] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.525386] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.571507] ehci-pci 0000:00:1d.7: debug port 2 [ 1.595428] tsc: Refined TSC clocksource calibration: 2798.007 MHz [ 1.667549] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 1.714848] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbffe000 [ 1.771485] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.817915] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.864733] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.911678] usb usb2: Product: EHCI Host Controller [ 1.958537] usb usb2: Manufacturer: Linux 3.19.0-rc7-patch03 ehci_hcd [ 2.005595] usb usb2: SerialNumber: 0000:00:1d.7 [ 2.052004] hub 2-0:1.0: USB hub found [ 2.097478] hub 2-0:1.0: 8 ports detected [ 2.142436] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.188132] ohci-pci: OHCI PCI platform driver [ 2.233925] uhci_hcd: USB Universal Host Controller Interface driver [ 2.280550] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.326900] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.373016] uhci_hcd 0000:00:1a.0: detected 2 ports [ 2.417885] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00 [ 2.462180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.506542] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.551345] usb usb3: Product: UHCI Host Controller [ 2.595709] usb usb3: Manufacturer: Linux 3.19.0-rc7-patch03 uhci_hcd [ 2.640065] usb usb3: SerialNumber: 0000:00:1a.0 [ 2.683695] Switched to clocksource tsc [ 2.683876] hub 3-0:1.0: USB hub found [ 2.683882] hub 3-0:1.0: 2 ports detected [ 2.684031] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.684035] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.684043] uhci_hcd 0000:00:1a.1: detected 2 ports [ 2.684082] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00 [ 2.684121] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.684122] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.684123] usb usb4: Product: UHCI Host Controller [ 2.684124] usb usb4: Manufacturer: Linux 3.19.0-rc7-patch03 uhci_hcd [ 2.684124] usb usb4: SerialNumber: 0000:00:1a.1 [ 2.684339] hub 4-0:1.0: USB hub found [ 2.684345] hub 4-0:1.0: 2 ports detected [ 2.684489] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 2.684492] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 2.684501] uhci_hcd 0000:00:1a.2: detected 2 ports [ 2.684529] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fd00 [ 2.684568] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.684569] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.684570] usb usb5: Product: UHCI Host Controller [ 2.684571] usb usb5: Manufacturer: Linux 3.19.0-rc7-patch03 uhci_hcd [ 2.684571] usb usb5: SerialNumber: 0000:00:1a.2 [ 2.684783] hub 5-0:1.0: USB hub found [ 2.684789] hub 5-0:1.0: 2 ports detected [ 2.684938] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.684941] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 2.684950] uhci_hcd 0000:00:1d.0: detected 2 ports [ 2.684978] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00 [ 2.685018] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.685019] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.685020] usb usb6: Product: UHCI Host Controller [ 2.685020] usb usb6: Manufacturer: Linux 3.19.0-rc7-patch03 uhci_hcd [ 2.685021] usb usb6: SerialNumber: 0000:00:1d.0 [ 2.685218] hub 6-0:1.0: USB hub found [ 2.685223] hub 6-0:1.0: 2 ports detected [ 2.685373] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.685376] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 2.685385] uhci_hcd 0000:00:1d.1: detected 2 ports [ 2.685423] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00 [ 2.685463] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.685464] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.685464] usb usb7: Product: UHCI Host Controller [ 2.685465] usb usb7: Manufacturer: Linux 3.19.0-rc7-patch03 uhci_hcd [ 2.685466] usb usb7: SerialNumber: 0000:00:1d.1 [ 2.685653] hub 7-0:1.0: USB hub found [ 2.685657] hub 7-0:1.0: 2 ports detected [ 2.685802] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.685805] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 2.685814] uhci_hcd 0000:00:1d.2: detected 2 ports [ 2.685841] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00 [ 2.685880] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.685881] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.685882] usb usb8: Product: UHCI Host Controller [ 2.685882] usb usb8: Manufacturer: Linux 3.19.0-rc7-patch03 uhci_hcd [ 2.685883] usb usb8: SerialNumber: 0000:00:1d.2 [ 2.686043] hub 8-0:1.0: USB hub found [ 2.686047] hub 8-0:1.0: 2 ports detected [ 2.686186] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.686189] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 9 [ 2.686198] uhci_hcd 0000:00:1d.3: detected 2 ports [ 2.686226] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f900 [ 2.686264] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.686265] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.686266] usb usb9: Product: UHCI Host Controller [ 2.686267] usb usb9: Manufacturer: Linux 3.19.0-rc7-patch03 uhci_hcd [ 2.686267] usb usb9: SerialNumber: 0000:00:1d.3 [ 2.686452] hub 9-0:1.0: USB hub found [ 2.686455] hub 9-0:1.0: 2 ports detected [ 2.686552] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.686552] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.686714] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.686980] mousedev: PS/2 mouse device common for all mice [ 2.687532] rtc_cmos 00:01: RTC can wake from S4 [ 2.687824] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.687880] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 2.687924] device-mapper: uevent: version 1.0.3 [ 2.688101] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 2.688163] TCP: cubic registered [ 2.688232] NET: Registered protocol family 10 [ 2.708028] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 2.727717] NET: Registered protocol family 17 [ 2.727724] Key type dns_resolver registered [ 2.728442] registered taskstats version 1 [ 2.730334] Key type trusted registered [ 2.734075] Key type encrypted registered [ 2.734078] AppArmor: AppArmor sha1 policy hashing enabled [ 2.734080] ima: No TPM chip found, activating TPM-bypass! [ 2.734093] evm: HMAC attrs: 0x1 [ 2.734664] Magic number: 3:18:862 [ 2.771336] rtc_cmos 00:01: setting system clock to 2015-02-08 01:53:21 UTC (1423360401) [ 2.859284] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.859285] EDD information not available. [ 2.859317] PM: Hibernation image not present or could not be loaded. [ 3.023515] usb 5-2: new low-speed USB device number 2 using uhci_hcd [ 3.222662] usb 5-2: New USB device found, idVendor=04b4, idProduct=0101 [ 3.222664] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.222665] usb 5-2: Product: Cypress PS/2 Keyboard - PS/2 Mouse [ 3.222666] usb 5-2: Manufacturer: Cypress [ 6.849676] sched: RT throttling activated [ 6.896052] Freeing unused kernel memory: 1212K (ffffffff81d09000 - ffffffff81e38000) [ 6.943217] Write protecting the kernel read-only data: 12288k [ 6.991157] Freeing unused kernel memory: 1376K (ffff8800016a8000 - ffff880001800000) [ 7.039844] Freeing unused kernel memory: 824K (ffff880001b32000 - ffff880001c00000) [ 7.149372] systemd-udevd[132]: starting version 204 [ 7.202500] mpt2sas version 18.100.00.00 loaded [ 7.251712] mpt2sas 0000:01:00.0: can't enable device: BAR 1 [mem 0x00000000-0x00003fff 64bit] not claimed [ 7.252441] scsi host1: pata_jmicron [ 7.252578] scsi host2: pata_jmicron [ 7.252624] ata1: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 17 [ 7.252625] ata2: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 17 [ 7.503607] mpt2sas0: pci_enable_device_mem: failed [ 7.553284] mpt2sas0: failure at drivers/scsi/mpt2sas/mpt2sas_scsih.c:8192/_scsih_probe()! [ 7.604370] hidraw: raw HID events driver (C) Jiri Kosina [ 7.656303] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.656329] ahci 0000:00:1f.2: version 3.0 [ 7.656504] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 7.656607] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 7.656610] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst [ 7.683011] usbcore: registered new interface driver usbhid [ 7.683012] usbhid: USB HID core driver [ 7.696401] scsi host3: ahci [ 7.696511] scsi host4: ahci [ 7.696616] scsi host5: ahci [ 7.696713] scsi host6: ahci [ 7.696807] scsi host7: ahci [ 7.696904] scsi host8: ahci [ 7.696945] ata3: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd100 irq 29 [ 7.696948] ata4: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd180 irq 29 [ 7.696950] ata5: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd200 irq 29 [ 7.696953] ata6: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd280 irq 29 [ 7.696955] ata7: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd300 irq 29 [ 7.696958] ata8: SATA max UDMA/133 abar m2048@0xfbffd000 port 0xfbffd380 irq 29 [ 7.697114] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 7.697116] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 7.697386] scsi host9: ahci [ 7.697481] scsi host10: ahci [ 7.697524] ata9: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16 [ 7.697527] ata10: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16 [ 7.861320] input: Cypress Cypress PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:04B4:0101.0001/input/input3 [ 7.916181] hid-generic 0003:04B4:0101.0001: input,hidraw0: USB HID v1.00 Keyboard [Cypress Cypress PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1a.2-2/input0 [ 7.916291] input: Cypress Cypress PS/2 Keyboard - PS/2 Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/0003:04B4:0101.0002/input/input4 [ 7.916634] hid-generic 0003:04B4:0101.0002: input,hidraw1: USB HID v1.00 Mouse [Cypress Cypress PS/2 Keyboard - PS/2 Mouse] on usb-0000:00:1a.2-2/input1 [ 8.015993] ata9: SATA link down (SStatus 0 SControl 300) [ 8.016051] ata10: SATA link down (SStatus 0 SControl 300) [ 8.187884] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.189647] ata3.00: ATA-8: WDC WD2000FYYZ-01UL1B2, 01.01K03, max UDMA/133 [ 8.189648] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 8.190775] ata3.00: configured for UDMA/133 [ 8.190987] scsi 3:0:0:0: Direct-Access ATA WDC WD2000FYYZ-0 1K03 PQ: 0 ANSI: 5 [ 8.191346] sd 3:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8.191348] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 8.191377] sd 3:0:0:0: [sda] Write Protect is off [ 8.191378] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.191388] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.212300] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 8.212808] sd 3:0:0:0: [sda] Attached SCSI disk [ 8.679968] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.698742] ata4.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133 [ 8.698743] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 8.700011] ata4.00: configured for UDMA/133 [ 8.700106] scsi 4:0:0:0: Direct-Access ATA Hitachi HDT72101 A31B PQ: 0 ANSI: 5 [ 8.700488] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 8.700521] sd 4:0:0:0: [sdb] Write Protect is off [ 8.700522] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.700529] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 8.700532] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.727138] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 8.727484] sd 4:0:0:0: [sdb] Attached SCSI disk [ 9.019951] ata5: SATA link down (SStatus 0 SControl 300) [ 9.511966] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.518666] ata6.00: ATA-8: WDC WD1200AAJS-00VTA0, 01.01B01, max UDMA/133 [ 9.518667] ata6.00: 234441648 sectors, multi 0: LBA48 [ 9.526151] ata6.00: configured for UDMA/133 [ 9.526315] scsi 6:0:0:0: Direct-Access ATA WDC WD1200AAJS-0 1B01 PQ: 0 ANSI: 5 [ 9.526700] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 9.526746] sd 6:0:0:0: [sdc] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 9.527070] sd 6:0:0:0: [sdc] Write Protect is off [ 9.527071] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 9.527166] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.552542] sdc: sdc1 sdc2 sdc3 sdc4 [ 9.553868] sd 6:0:0:0: [sdc] Attached SCSI disk [ 9.844115] ata7: SATA link down (SStatus 0 SControl 300) [ 10.164071] ata8: SATA link down (SStatus 0 SControl 300) [ 10.228314] random: nonblocking pool is initialized [ 10.276055] floppy0: no floppy controllers found [ 10.276066] work still pending [ 11.596100] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 11.648944] r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xffffc900018fe000, 00:24:1d:d9:29:dd, XID 083000c0 IRQ 30 [ 11.701492] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 15.774057] EXT4-fs (sdc4): mounting ext2 file system using the ext4 subsystem [ 15.850785] EXT4-fs (sdc4): mounted filesystem without journal. Opts: (null) [ 17.713610] init: plymouth-upstart-bridge main process (226) terminated with status 1 [ 17.765888] init: plymouth-upstart-bridge main process ended, respawning [ 28.993668] Adding 9798652k swap on /dev/sdc2. Priority:-1 extents:1 across:9798652k FS [ 29.269962] systemd-udevd[340]: starting version 204 [ 30.201341] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C) (20141107/utaddress-258) [ 30.309620] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 30.365655] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 30.365712] parport_pc 00:03: reported by Plug and Play ACPI [ 30.365802] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 30.535295] lp0: using parport0 (interrupt-driven). [ 30.545204] audit: type=1400 audit(1423360429.302:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=463 comm="apparmor_parser" [ 30.545291] audit: type=1400 audit(1423360429.302:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=463 comm="apparmor_parser" [ 30.545370] audit: type=1400 audit(1423360429.302:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=463 comm="apparmor_parser" [ 30.551813] audit: type=1400 audit(1423360429.310:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=462 comm="apparmor_parser" [ 30.551894] audit: type=1400 audit(1423360429.310:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=462 comm="apparmor_parser" [ 30.551965] audit: type=1400 audit(1423360429.310:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=462 comm="apparmor_parser" [ 31.227351] gpio_ich: GPIO from 436 to 511 on gpio_ich [ 31.443193] EDAC MC: Ver: 3.0.0 [ 31.516599] ppdev: user-space parallel port driver [ 31.589205] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED) [ 31.662929] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED) [ 31.737813] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 31.813275] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround [ 32.213731] sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 32.289830] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 32.365719] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 32.440958] sound hdaudioC0D2: mono: mono_out=0x0 [ 32.516197] sound hdaudioC0D2: dig-out=0x1e/0x0 [ 32.590587] sound hdaudioC0D2: inputs: [ 32.663607] sound hdaudioC0D2: Rear Mic=0x18 [ 32.736459] sound hdaudioC0D2: Front Mic=0x19 [ 32.808794] sound hdaudioC0D2: Line=0x1a [ 32.881283] sound hdaudioC0D2: CD=0x1c [ 32.953051] sound hdaudioC0D2: dig-in=0x1f [ 33.034632] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 33.108084] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 33.181379] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 33.254187] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 33.962944] EXT4-fs (sdc4): re-mounted. Opts: errors=remount-ro [ 34.389853] init: failsafe main process (653) killed by TERM signal [ 34.533828] floppy0: no floppy controllers found [ 34.986701] audit: type=1400 audit(1423360433.746:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=778 comm="apparmor_parser" [ 35.134692] audit: type=1400 audit(1423360433.894:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=781 comm="apparmor_parser" [ 35.285268] audit: type=1400 audit(1423360434.042:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=775 comm="apparmor_parser" [ 35.436508] audit: type=1400 audit(1423360434.194:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=822 comm="apparmor_parser" [ 35.591126] audit: type=1400 audit(1423360434.350:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=774 comm="apparmor_parser" [ 35.753172] audit: type=1400 audit(1423360434.510:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=775 comm="apparmor_parser" [ 35.915825] audit: type=1400 audit(1423360434.674:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=779 comm="apparmor_parser" [ 36.078523] audit: type=1400 audit(1423360434.838:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=779 comm="apparmor_parser" [ 36.078731] audit: type=1400 audit(1423360434.838:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=822 comm="apparmor_parser" [ 36.078794] audit: type=1400 audit(1423360434.838:17): apparmor="STATUS" operation="profile_load" name="chromium" pid=774 comm="apparmor_parser" [ 36.078818] audit: type=1400 audit(1423360434.838:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=775 comm="apparmor_parser" [ 36.174592] Bluetooth: Core ver 2.20 [ 36.174604] NET: Registered protocol family 31 [ 36.174605] Bluetooth: HCI device and connection manager initialized [ 36.174608] Bluetooth: HCI socket layer initialized [ 36.174610] Bluetooth: L2CAP socket layer initialized [ 36.174614] Bluetooth: SCO socket layer initialized [ 36.225930] init: cups main process (845) killed by HUP signal [ 36.225938] init: cups main process ended, respawning [ 36.250159] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 36.250160] Bluetooth: BNEP filters: protocol multicast [ 36.250163] Bluetooth: BNEP socket layer initialized [ 36.383062] Bluetooth: RFCOMM TTY layer initialized [ 36.383065] Bluetooth: RFCOMM socket layer initialized [ 36.383068] Bluetooth: RFCOMM ver 1.11 [ 37.219293] r8169 0000:03:00.0 eth0: link down [ 37.219313] r8169 0000:03:00.0 eth0: link down [ 37.219337] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.946547] audit: type=1400 audit(1423360436.706:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=776 comm="apparmor_parser" [ 37.946858] audit: type=1400 audit(1423360436.706:20): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=776 comm="apparmor_parser" [ 37.968380] audit: type=1400 audit(1423360436.726:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=776 comm="apparmor_parser" [ 39.978426] r8169 0000:03:00.0 eth0: link up [ 39.978432] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 42.079590] init: alsa-restore main process (973) terminated with status 99 [ 42.170239] audit_printk_skb: 9 callbacks suppressed [ 42.170240] audit: type=1400 audit(1423360440.930:25): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cups-browsed" pid=1023 comm="apparmor_parser" [ 46.897623] init: plymouth-upstart-bridge main process ended, respawning [ 66.300368] audit: type=1400 audit(1423360465.058:26): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=2215 comm="apparmor_parser" [ 66.300374] audit: type=1400 audit(1423360465.058:27): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2215 comm="apparmor_parser" [ 66.300662] audit: type=1400 audit(1423360465.058:28): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=2215 comm="apparmor_parser" --------------030805080809080404030206--