Re: [PATCH v2] brcmfmac: avoid duplicated suspend/resume operation

[Arend van Spriel <arend@broadcom.com>]

On 02/09/15 05:43, Fu, Zhonghui wrote:
>  From ff39ed4af9f1c50358fe92ec4c8eaac9db183e00 Mon Sep 17 00:00:00 2001
> From: Zhonghui Fu<zhonghui.fu@linux.intel.com>
> Date: Mon, 26 Jan 2015 10:13:21 +0800
> Subject: [PATCH v2] brcmfmac: avoid duplicated suspend/resume operation
>
> WiFi chip has 2 SDIO functions, and PM core will trigger
> twice suspend/resume operations for one WiFi chip to do
> the same things. This patch avoid this case.

Well, another remark from Kalle was that this patch does not apply to 
wireless-drivers-next/master branch. So I tried to apply this patch and 
it failed. Please rebase this patch.

Regards,
Arend

> Acked-by: Arend van Spriel<arend@broadcom.com>
> Signed-off-by: Zhonghui Fu<zhonghui.fu@linux.intel.com>
> ---
> Changes in v2:
>   - Remove two "Acked-by" lines
>
>   drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c |   17 +++++++++++++++--
>   1 files changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
> index 9880dae..618b545 100644
> --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
> +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
> @@ -1139,11 +1139,17 @@ void brcmf_sdio_wowl_config(struct device *dev, bool enabled)
>   static int brcmf_ops_sdio_suspend(struct device *dev)
>   {
>   	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
> -	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
> +	struct brcmf_sdio_dev *sdiodev;
>   	mmc_pm_flag_t sdio_flags;
> +	struct sdio_func *func = dev_to_sdio_func(dev);
>
>   	brcmf_dbg(SDIO, "Enter\n");
>
> +	if (func->num == 2)
> +		return 0;
> +
> +	sdiodev = bus_if->bus_priv.sdio;
> +
>   	atomic_set(&sdiodev->suspend, true);
>
>   	if (sdiodev->wowl_enabled) {
> @@ -1164,9 +1170,16 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
>   static int brcmf_ops_sdio_resume(struct device *dev)
>   {
>   	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
> -	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
> +	struct brcmf_sdio_dev *sdiodev;
> +	struct sdio_func *func = dev_to_sdio_func(dev);
>
>   	brcmf_dbg(SDIO, "Enter\n");
> +
> +	if (func->num == 2)
> +		return 0;
> +
> +	sdiodev = bus_if->bus_priv.sdio;
> +
>   	if (sdiodev->pdata&&  sdiodev->pdata->oob_irq_supported)
>   		disable_irq_wake(sdiodev->pdata->oob_irq_nr);
>   	brcmf_sdio_wd_timer(sdiodev->bus, BRCMF_WD_POLL_MS);
> -- 1.7.1
>