diff for duplicates of <54D874E9.1040302@ti.com> diff --git a/a/1.txt b/N1/1.txt index 9d49ae2..150c939 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,6 +1,6 @@ Hi, -On Tuesday 03 February 2015 09:21 PM, grygorii.strashko@linaro.org wrote: +On Tuesday 03 February 2015 09:21 PM, grygorii.strashko at linaro.org wrote: > From: Grygorii Strashko <grygorii.strashko@linaro.org> > > Now DRA7xx pcie1/2 hwmods define PRCM configuration as following: @@ -10,11 +10,11 @@ On Tuesday 03 February 2015 09:21 PM, grygorii.strashko@linaro.org wrote: > which is completely wrong because DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET > is clockdomain ctrl register and NOT module ctrl register. > And they have diffrent allowed values for bits[0,1]: -> CLKTRCTRL MODULEMODE -> 0x0: NO_SLEEP 0x0: Module is disabled by SW. -> 0x1: SW_SLEEP 0x1: Module is managed automatically by HW -> 0x2: SW_WKUP 0x2: Module is explicitly enabled. -> 0x3: HW_AUTO 0x3: Reserved +> CLKTRCTRL?????????MODULEMODE?????????????????????????????????? +> 0x0:?NO_SLEEP?????0x0:?Module?is?disabled?by?SW.?????????????? +> 0x1:?SW_SLEEP?????0x1:?Module?is?managed?automatically?by?HW?? +> 0x2:?SW_WKUP??????0x2:?Module?is?explicitly?enabled.?????????? +> 0x3:?HW_AUTO??????0x3:?Reserved?? > > As result, following message can be seen during suspend: > "omap_hwmod: pcie1: _wait_target_disable failed" @@ -72,7 +72,3 @@ I think the entire .prcm can be removed here. Thanks Kishon --- -To unsubscribe from this list: send the line "unsubscribe linux-omap" in -the body of a message to majordomo@vger.kernel.org -More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index dd1f938..a28a30c 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,19 +1,13 @@ "ref\01422978684-4826-1-git-send-email-grygorii.strashko@linaro.org\0" - "From\0Kishon Vijay Abraham I <kishon@ti.com>\0" - "Subject\0Re: [PATCH] ARM: dra7xx: hwmod: drop .modulemode from pcie1/2 hwmods\0" + "From\0kishon@ti.com (Kishon Vijay Abraham I)\0" + "Subject\0[PATCH] ARM: dra7xx: hwmod: drop .modulemode from pcie1/2 hwmods\0" "Date\0Mon, 9 Feb 2015 14:20:49 +0530\0" - "To\0grygorii.strashko@linaro.org" - Tony Lindgren <tony@atomide.com> - Paul Walmsley <paul@pwsan.com> - " linux-omap@vger.kernel.org\0" - "Cc\0sumit.semwal@linaro.org" - linux-arm-kernel@lists.infradead.org - " Nishanth Menon <nm@ti.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Hi,\n" "\n" - "On Tuesday 03 February 2015 09:21 PM, grygorii.strashko@linaro.org wrote:\n" + "On Tuesday 03 February 2015 09:21 PM, grygorii.strashko at linaro.org wrote:\n" "> From: Grygorii Strashko <grygorii.strashko@linaro.org>\n" "> \n" "> Now DRA7xx pcie1/2 hwmods define PRCM configuration as following:\n" @@ -23,11 +17,11 @@ "> which is completely wrong because DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET\n" "> is clockdomain ctrl register and NOT module ctrl register.\n" "> And they have diffrent allowed values for bits[0,1]:\n" - "> CLKTRCTRL\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211MODULEMODE\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\n" - "> 0x0:\342\200\211NO_SLEEP\342\200\211\342\200\211\342\200\211\342\200\211\342\200\2110x0:\342\200\211Module\342\200\211is\342\200\211disabled\342\200\211by\342\200\211SW.\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\n" - "> 0x1:\342\200\211SW_SLEEP\342\200\211\342\200\211\342\200\211\342\200\211\342\200\2110x1:\342\200\211Module\342\200\211is\342\200\211managed\342\200\211automatically\342\200\211by\342\200\211HW\342\200\211\342\200\211\n" - "> 0x2:\342\200\211SW_WKUP\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\2110x2:\342\200\211Module\342\200\211is\342\200\211explicitly\342\200\211enabled.\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\n" - "> 0x3:\342\200\211HW_AUTO\342\200\211\342\200\211\342\200\211\342\200\211\342\200\211\342\200\2110x3:\342\200\211Reserved\342\200\211\342\200\211\n" + "> CLKTRCTRL?????????MODULEMODE??????????????????????????????????\n" + "> 0x0:?NO_SLEEP?????0x0:?Module?is?disabled?by?SW.??????????????\n" + "> 0x1:?SW_SLEEP?????0x1:?Module?is?managed?automatically?by?HW??\n" + "> 0x2:?SW_WKUP??????0x2:?Module?is?explicitly?enabled.??????????\n" + "> 0x3:?HW_AUTO??????0x3:?Reserved??\n" "> \n" "> As result, following message can be seen during suspend:\n" "> \"omap_hwmod: pcie1: _wait_target_disable failed\"\n" @@ -84,10 +78,6 @@ "> \n" "\n" "Thanks\n" - "Kishon\n" - "--\n" - "To unsubscribe from this list: send the line \"unsubscribe linux-omap\" in\n" - "the body of a message to majordomo@vger.kernel.org\n" - More majordomo info at http://vger.kernel.org/majordomo-info.html + Kishon -fe796a6dbb38efc39299e17dc19c474997cbad33df1c48a92c7ef1aa08bb0c9d +be95f56461b10c30ad25f77fa2d277f30f893e55c7eeb7a86d822bd8d58c3b94
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.