All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bo Shen <voice.shen@atmel.com>
To: Doug Brainard <dbrainard@brainardinsight.com>,
	barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND.
Date: Wed, 11 Feb 2015 09:30:18 +0800	[thread overview]
Message-ID: <54DAB0AA.7090402@atmel.com> (raw)
In-Reply-To: <1423578481-25230-1-git-send-email-dbrainard@brainardinsight.com>

Hi Doug Brainard,

On 02/10/2015 10:28 PM, Doug Brainard wrote:
> ---
>   arch/arm/boards/sama5d4ek/env/config | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)

As this file will be totally discard in patch 2/2. So, I think no need 
to add this patch. And also it change the default boot setting to 
Android only.

> diff --git a/arch/arm/boards/sama5d4ek/env/config b/arch/arm/boards/sama5d4ek/env/config
> index 1007345..ee86c07 100644
> --- a/arch/arm/boards/sama5d4ek/env/config
> +++ b/arch/arm/boards/sama5d4ek/env/config
> @@ -11,16 +11,16 @@ ip=dhcp
>   #eth0.serverip=a.b.c.d
>
>   # can be either 'nfs', 'tftp', 'nor' or 'nand'
> -kernel_loc=nfs
> +kernel_loc=nand
>   # can be either 'net', 'nor', 'nand' or 'initrd'
> -rootfs_loc=net
> +rootfs_loc=nand
>   # can be either 'nfs', 'tftp', 'nand' or empty
> -oftree_loc=nfs
> +oftree_loc=nand
>
>   # can be either 'jffs2' or 'ubifs'
>   rootfs_type=ubifs
>   rootfsimage=root.$rootfs_type
> -ubiroot=rootfs
> +ubiroot=system
>
>   # The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
>   kernelimage=zImage
> @@ -29,14 +29,14 @@ kernelimage=zImage
>   #kernelimage=Image.lzo
>
>   nand_device=atmel_nand
> -nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),-(rootfs)"
> -rootfs_mtdblock_nand=7
> +nand_parts="256k(at91bootstrap),512k(barebox)ro,256k(bareboxenv),256k(bareboxenv2),256k(spare),512k(oftree),6M(kernel),8M(recovery),176M(system),304M(userdata),-(cache)"
> +rootfs_mtdblock_nand=10
>
>   m25p80_parts="64k(bootstrap),384k(barebox),256k(bareboxenv),256k(bareboxenv2),128k(oftree),-(updater)"
>
>   autoboot_timeout=3
>
> -bootargs="console=ttyS0,115200"
> +bootargs="console=ttyS0,115200 ubi.mtd=8 ubi.mtd=9 init=/init androidboot.hardware=sama5-pda androidboot.lcd=wvga"
>
>   # set a fancy prompt (if support is compiled in)
>   PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m\n# "
>

Best Regards,
Bo Shen

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2015-02-11  1:33 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-10 14:28 [PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND Doug Brainard
2015-02-10 14:28 ` [PATCH 2/2] Switched SAMA5D4EK development board to the newer environment method Doug Brainard
2015-02-11  2:34   ` Bo Shen
2015-02-11  4:00     ` Doug Brainard
2015-02-11  5:06       ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11  7:26         ` Bo Shen
2015-02-11  8:35           ` Sascha Hauer
2015-02-11  8:54             ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11  9:12               ` Eric Bénard
2015-02-11  9:19               ` Sascha Hauer
2015-02-11 12:03                 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11 14:33                   ` Sascha Hauer
2015-02-11  8:43     ` Sascha Hauer
2015-02-11 16:53       ` Doug Brainard
2015-02-11 16:38     ` Doug Brainard
2015-02-11 17:39       ` Doug Brainard
2015-02-12  9:13         ` Sascha Hauer
2015-02-13  2:57           ` Doug Brainard
2015-02-13  5:32           ` Doug Brainard
2015-02-11  1:30 ` Bo Shen [this message]
2015-02-11  4:02   ` [PATCH 1/2] SAMA5D4EK - Now mostly supports booting Android from NAND Doug Brainard
2015-02-11  7:23     ` Bo Shen
2015-02-11  5:04 ` Jean-Christophe PLAGNIOL-VILLARD
2015-02-11  7:42   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54DAB0AA.7090402@atmel.com \
    --to=voice.shen@atmel.com \
    --cc=barebox@lists.infradead.org \
    --cc=dbrainard@brainardinsight.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.