From: "Purushothaman, Vijay A" <vijay.a.purushothaman@linux.intel.com>
To: Jani Nikula <jani.nikula@linux.intel.com>,
Intel Graphics <intel-gfx@lists.freedesktop.org>,
ville.syrjala@intel.com
Subject: Re: [PATCH] drm/i915: More DPIO magic for CHV HDMI & DP
Date: Thu, 12 Feb 2015 18:50:50 +0530 [thread overview]
Message-ID: <54DCA8B2.5020504@linux.intel.com> (raw)
In-Reply-To: <87a90muec7.fsf@intel.com>
On 2/10/2015 6:13 PM, Jani Nikula wrote:
> On Thu, 29 Jan 2015, Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com> wrote:
>> This patch implements latest changes in Gain, lock threshold and integer
>> co-efficient values using sideband r/w. Without these changes there will
>> be signal integrity issues for both HDMI and DP.
> Vijay, are you planning on sending a v2 of the patch? I'd like to see if
> it helps with bugs
>
> https://bugs.freedesktop.org/show_bug.cgi?id=83870
> https://bugs.freedesktop.org/show_bug.cgi?id=84304
I will post the next patch series tomorrow. But i don't have a working
CHV setup. I might need some help to test those patches.
Thanks,
Vijay
>
> BR,
> Jani.
>
>> Change-Id: I7b7151b5ab3a52c4c912cf10602c69a7d1a70222
>> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
>> Tested-by: Hong Liu <hong.liu@intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_reg.h | 31 ++++++++++++++++
>> drivers/gpu/drm/i915/intel_display.c | 67 ++++++++++++++++++++++++----------
>> 2 files changed, 79 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index 137c5e0..2b3f065 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -1049,6 +1049,37 @@ enum punit_power_well {
>> #define DPIO_CHV_PROP_COEFF_SHIFT 0
>> #define CHV_PLL_DW6(ch) _PIPE(ch, _CHV_PLL_DW6_CH0, _CHV_PLL_DW6_CH1)
>>
>> +#define _CHV_PLL_DW7_CH0 0x801c
>> +#define _CHV_PLL_DW7_CH1 0x803c
>> +#define CHV_PLL_DW7(ch) _PIPE(ch, _CHV_PLL_DW7_CH0, _CHV_PLL_DW7_CH1)
>> +
>> +#define _CHV_PLL_DW8_CH0 0x8020
>> +#define _CHV_PLL_DW8_CH1 0x81A0
>> +#define CHV_PLL_DW8(ch) _PIPE(ch, _CHV_PLL_DW8_CH0, _CHV_PLL_DW8_CH1)
>> +
>> +#define _CHV_PLL_DW9_CH0 0x8024
>> +#define _CHV_PLL_DW9_CH1 0x81A4
>> +#define DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT 1 /* 3 bits */
>> +#define DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE 1 /* 1: coarse & 0 : fine */
>> +#define CHV_PLL_DW9(ch) _PIPE(ch, _CHV_PLL_DW9_CH0, _CHV_PLL_DW9_CH1)
>> +
>> +#define _CHV_PLL_DW10_CH0 0x8040
>> +#define _CHV_PLL_DW10_CH1 0x8060
>> +#define CHV_PLL_DW10(ch) _PIPE(ch, _CHV_PLL_DW10_CH0, _CHV_PLL_DW10_CH1)
>> +
>> +#define _CHV_PLL_DW11_BCAST 0xC044
>> +#define _CHV_PLL_DW11_CH0 0x8044
>> +#define _CHV_PLL_DW11_CH1 0x8064
>> +#define CHV_PLL_DW11(ch) _PIPE(ch, _CHV_PLL_DW11_CH0, _CHV_PLL_DW11_CH1)
>> +
>> +#define _CHV_PLL_DW12_CH0 0x8048
>> +#define _CHV_PLL_DW12_CH1 0x8068
>> +#define CHV_PLL_DW12(ch) _PIPE(ch, _CHV_PLL_DW12_CH0, _CHV_PLL_DW12_CH1)
>> +
>> +#define _CHV_PLL_DW13_CH0 0x804C
>> +#define _CHV_PLL_DW13_CH1 0x806C
>> +#define CHV_PLL_DW13(ch) _PIPE(ch, _CHV_PLL_DW13_CH0, _CHV_PLL_DW13_CH1)
>> +
>> #define _CHV_CMN_DW5_CH0 0x8114
>> #define CHV_BUFRIGHTENA1_DISABLE (0 << 20)
>> #define CHV_BUFRIGHTENA1_NORMAL (1 << 20)
>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> index c362d11e..fb27faf 100644
>> --- a/drivers/gpu/drm/i915/intel_display.c
>> +++ b/drivers/gpu/drm/i915/intel_display.c
>> @@ -6576,9 +6576,9 @@ static void chv_update_pll(struct intel_crtc *crtc)
>> int pipe = crtc->pipe;
>> int dpll_reg = DPLL(crtc->pipe);
>> enum dpio_channel port = vlv_pipe_to_channel(pipe);
>> - u32 loopfilter, intcoeff;
>> + u32 loopfilter, tribuf_calcntr;
>> u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
>> - int refclk;
>> + int vco;
>>
>> crtc->config.dpll_hw_state.dpll = DPLL_SSC_REF_CLOCK_CHV |
>> DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS |
>> @@ -6595,6 +6595,7 @@ static void chv_update_pll(struct intel_crtc *crtc)
>> bestm2 = crtc->config.dpll.m2 >> 22;
>> bestp1 = crtc->config.dpll.p1;
>> bestp2 = crtc->config.dpll.p2;
>> + vco = crtc->config.dpll.vco;
>>
>> /*
>> * Enable Refclk and SSC
>> @@ -6619,31 +6620,59 @@ static void chv_update_pll(struct intel_crtc *crtc)
>> DPIO_CHV_M1_DIV_BY_2 |
>> 1 << DPIO_CHV_N_DIV_SHIFT);
>>
>> - /* M2 fraction division */
>> - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
>> + if (bestm2_frac) {
>> + /* M2 fraction division */
>> + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
>> +
>> + /* M2 fraction division enable */
>> + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port),
>> + vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port)) &
>> + DPIO_CHV_FRAC_DIV_EN);
>> +
>> + /* Program digital lock detect threshold */
>> + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port),
>> + vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port)) |
>> + (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT));
>> + } else {
>> + /* M2 fraction division disable */
>> + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port),
>> + vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port)) &
>> + ~(DPIO_CHV_FRAC_DIV_EN));
>>
>> - /* M2 fraction division enable */
>> - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port),
>> - DPIO_CHV_FRAC_DIV_EN |
>> - (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT));
>> + /* Program digital lock detect threshold */
>> + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port),
>> + vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port)) |
>> + (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT) |
>> + DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
>> + }
>>
>> /* Loop filter */
>> - refclk = i9xx_get_refclk(&crtc->base, 0);
>> - loopfilter = 5 << DPIO_CHV_PROP_COEFF_SHIFT |
>> - 2 << DPIO_CHV_GAIN_CTRL_SHIFT;
>> - if (refclk == 100000)
>> - intcoeff = 11;
>> - else if (refclk == 38400)
>> - intcoeff = 10;
>> + if (vco == 540000)
>> + loopfilter = 0x10803;
>> + else if (vco <= 620000)
>> + loopfilter = 0x30B05;
>> + else if (vco <= 648000)
>> + loopfilter = 0x30904;
>> + else
>> + loopfilter = 0x10803;
>> + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port),
>> + ((vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW6(port)) &
>> + 0xFF000000) | loopfilter));
>> +
>> + if (vco <= 620000)
>> + tribuf_calcntr = 0x9;
>> + else if (vco <= 648000)
>> + tribuf_calcntr = 0x8;
>> else
>> - intcoeff = 9;
>> - loopfilter |= intcoeff << DPIO_CHV_INT_COEFF_SHIFT;
>> - vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
>> + tribuf_calcntr = 0;
>> + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port),
>> + ((vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port)) &
>> + 0xFFFFFF00) | tribuf_calcntr));
>>
>> /* AFC Recal */
>> vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
>> vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
>> - DPIO_AFC_RECAL);
>> + DPIO_AFC_RECAL | DPIO_DCLKP_EN);
>>
>> mutex_unlock(&dev_priv->dpio_lock);
>> }
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx@lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
prev parent reply other threads:[~2015-02-12 13:21 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-29 18:31 [PATCH] drm/i915: More DPIO magic for CHV HDMI & DP Vijay Purushothaman
2015-01-30 11:09 ` Ville Syrjälä
2015-02-12 13:19 ` Purushothaman, Vijay A
2015-02-16 9:37 ` [v2 0/5] " Vijay Purushothaman
2015-02-16 9:37 ` [v2 1/5] drm/i915: Add new PHY reg definitions for lock threshold Vijay Purushothaman
2015-02-16 11:21 ` Ville Syrjälä
2015-02-16 9:37 ` [v2 2/5] drm/i915: Limit max VCO supported in CHV to 6.48GHz Vijay Purushothaman
2015-02-16 11:21 ` Ville Syrjälä
2015-02-23 16:13 ` Daniel Vetter
2015-03-03 14:57 ` Purushothaman, Vijay A
2015-03-05 15:52 ` Daniel Vetter
2015-03-05 15:59 ` Ville Syrjälä
2015-02-16 9:38 ` [v2 3/5] drm/i915: Disable M2 frac division for integer case Vijay Purushothaman
2015-02-16 11:23 ` Ville Syrjälä
2015-03-03 15:11 ` [PATCH 1/3] " Vijay Purushothaman
2015-03-03 15:36 ` Ville Syrjälä
2015-03-05 13:49 ` Purushothaman, Vijay A
2015-03-05 14:00 ` Vijay Purushothaman
2015-03-10 9:23 ` Daniel Vetter
2015-02-16 9:38 ` [v2 4/5] drm/i915: Initialize CHV digital lock detect threshold Vijay Purushothaman
2015-02-16 11:27 ` Ville Syrjälä
2015-03-03 15:13 ` [PATCH 2/3] " Vijay Purushothaman
2015-03-03 15:38 ` Ville Syrjälä
2015-03-05 13:50 ` Purushothaman, Vijay A
2015-03-05 14:02 ` Vijay Purushothaman
2015-02-16 9:38 ` [v2 5/5] drm/i915: Update prop, int co-eff and gain threshold for CHV Vijay Purushothaman
2015-02-16 11:32 ` Ville Syrjälä
2015-03-03 14:59 ` Purushothaman, Vijay A
2015-03-03 15:14 ` [PATCH 3/3] " Vijay Purushothaman
2015-03-03 15:45 ` Ville Syrjälä
2015-03-05 14:03 ` Vijay Purushothaman
2015-03-05 14:35 ` Ville Syrjälä
2015-02-23 16:13 ` [v2 0/5] More DPIO magic for CHV HDMI & DP Daniel Vetter
2015-02-10 12:43 ` [PATCH] drm/i915: " Jani Nikula
2015-02-12 13:20 ` Purushothaman, Vijay A [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54DCA8B2.5020504@linux.intel.com \
--to=vijay.a.purushothaman@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=ville.syrjala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.