[U-Boot] [PATCH V3 3/3] rpi: add support for Raspberry Pi 2 model B

[Stephen Warren <swarren@wwwdotorg.org>]

On 02/16/2015 06:03 PM, Tom Rini wrote:
> On Mon, Feb 16, 2015 at 12:16:15PM -0700, Stephen Warren wrote:
> 
>> USB doesn't seem to work yet; the controller detects the on-board
>> Hub/ Ethernet device but can't read the descriptors from it. I
>> haven't investigated yet.
>> 
>> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> --- v3:
>> Rebased on top of u-boot-dm merge. v2: Implement new board_rev
>> decoding scheme, to avoid hard-coding the board revision onthe
>> RPi 2.
> 
> +(rpi_2) make[3]: *** No rule to make target 
> `arch/arm/cpu/armv7/bcm2835/../../arm1176/bcm2835//init.o', needed
> by `arch/arm/cpu/armv7/bcm2835/built-in.o'.  Stop. +(rpi_2)
> make[2]: *** [arch/arm/cpu/armv7/bcm2835] Error 2 +(rpi_2) make[1]:
> *** [arch/arm/cpu/armv7] Error 2
> 
> When I try and build it with buildman.  Something get left out 
> somewhere?  Thanks!

It works fine for me using make:

export CROSS_COMPILE=arm-linux-gnueabi-
make ARCH=arm rpi_2_defconfig && make ARCH=arm -j8 -s

git status doesn't think I forgot to check anything in. The build
works after git clean -f -d -x.

I can't remember how to run buildman, and the help text doesn't really
clue me in. I guess I'll go wade through the README.

Do the commits at the following git branch work any better for you? I
just rebased them on the latest u-boot.git master branch:

git://github.com/swarren/u-boot.git rpi_dev