From: Stefan Huehner <stefan-Xd65/bSt805AfugRpC6u6w@public.gmane.org>
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: GM206 support?
Date: Sat, 21 Feb 2015 15:28:54 +0100 [thread overview]
Message-ID: <54E89626.1050904@huehner.org> (raw)
In-Reply-To: <CAKb7Uvi5zxN9_yw9OmuWLWDUz3Ce3xHYK4=fgp8Qp=nZu_N3hA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On 02/14/2015 06:52 AM, Ilia Mirkin wrote:
> On Fri, Feb 13, 2015 at 8:59 PM, Andy Lutomirski <luto@amacapital.net> wrote:
>> My new GTX 960 (GM206, I think) says:
>>
>> [ 10.329351] nouveau ![ DEVICE][0000:09:00.0] unknown Maxwell chipset
>> [ 10.329355] nouveau E[ DEVICE][0000:09:00.0] unknown chipset, 0x126010a1
>> [ 10.329356] nouveau E[ DRM] failed to create 0x00000080, -22
>> [ 10.330129] nouveau: probe of 0000:09:00.0 failed with error -22
>>
>> Hacking up nouveau so that it treats it like a GM204 doesn't work.
>
> What happens if you just drop the 0x126 next to the 0x124 in
> engine/device/gm100.c ?
Hi Ilia,
i just tried that on my GM206 / GTX960
and get following output:
[ 27.574808] wmi: Mapper loaded
[ 27.787010] checking generic (f1000000 300000) vs hw (e0000000 10000000)
[ 27.787012] checking generic (f1000000 300000) vs hw (f0000000 2000000)
[ 27.787014] fb: switching to nouveaufb from simple
[ 27.787057] Console: switching to colour dummy device 80x25
[ 27.787313] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x126010a1
[ 27.787317] nouveau [ DEVICE][0000:01:00.0] Chipset: GM204 (NV126)
[ 27.787319] nouveau [ DEVICE][0000:01:00.0] Family : NV110
[ 27.865776] nouveau [ VBIOS][0000:01:00.0] using image from PROM
[ 27.865895] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 27.865896] nouveau [ VBIOS][0000:01:00.0] version 84.06.0d.00.02
[ 27.865995] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 27.866025] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
[ 27.866026] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 27.866027] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 27.867385] nouveau E[ PDISP][0000:01:00.0] 03:0006:0f42: aux
channel not found
[ 27.867389] nouveau E[ PDISP][0000:01:00.0] 05:0006:0f82: aux
channel not found
[ 27.867392] nouveau E[ PDISP][0000:01:00.0] 07:0006:0f84: aux
channel not found
[ 27.867559] [TTM] Zone kernel: Available graphics memory: 8150570 kiB
[ 27.867561] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 27.867562] [TTM] Initializing pool allocator
[ 27.867565] [TTM] Initializing DMA pool allocator
[ 27.867570] nouveau [ DRM] VRAM: 2048 MiB
[ 27.867571] nouveau [ DRM] GART: 1048576 MiB
[ 27.867573] nouveau [ DRM] TMDS table version 2.0
[ 27.867574] nouveau [ DRM] DCB version 4.1
[ 27.867576] nouveau [ DRM] DCB outp 00: 01000f02 00020030
[ 27.867577] nouveau [ DRM] DCB outp 01: 02000f00 00000000
[ 27.867578] nouveau [ DRM] DCB outp 02: 04011f82 00020010
[ 27.867579] nouveau [ DRM] DCB outp 03: 02822f66 04400010
[ 27.867580] nouveau [ DRM] DCB outp 04: 02022f62 00020010
[ 27.867581] nouveau [ DRM] DCB outp 05: 02833f76 04400020
[ 27.867582] nouveau [ DRM] DCB outp 06: 02033f72 00020020
[ 27.867583] nouveau [ DRM] DCB outp 07: 04844f96 04400020
[ 27.867584] nouveau [ DRM] DCB outp 08: 04044f92 00020020
[ 27.867585] nouveau [ DRM] DCB outp 15: 01df5ff8 00000000
[ 27.867587] nouveau [ DRM] DCB conn 00: 00001030
[ 27.867588] nouveau [ DRM] DCB conn 01: 01000161
[ 27.867589] nouveau [ DRM] DCB conn 02: 00010246
[ 27.867590] nouveau [ DRM] DCB conn 03: 00020346
[ 27.867591] nouveau [ DRM] DCB conn 04: 02000446
[ 27.867592] nouveau [ DRM] DCB conn 05: 00000570
[ 27.867594] nouveau E[ DRM] Pointer to flat panel table invalid
[ 27.871470] nouveau W[ DRM] unknown connector type 70
[ 27.871490] nouveau W[ DRM] failed to create encoder 1/8/0: -19
[ 27.871492] nouveau W[ DRM] Unknown-1 has no encoders, removing
[ 27.871507] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 27.871508] [drm] Driver supports precise vblank timestamp query.
[ 27.871512] nouveau E[ DRM] failed to initialise sync subsystem, -38
[ 27.905083] nouveau 0000:01:00.0: No connectors reported connected
with modes
[ 27.905086] [drm] Cannot find any crtc or sizes - going 1024x768
[ 27.906297] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo
ffff8804196f0800
[ 27.906339] fbcon: nouveaufb (fb0) is primary device
[ 27.907023] Console: switching to colour frame buffer device 128x48
[ 27.908114] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 27.908133] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0
on minor 1
Connected HDMI monitor still doesn't lite up yet.
If you have any other things/patches to test just let me know. I'm also
around in #nouveau
Stefan
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
next prev parent reply other threads:[~2015-02-21 14:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-14 1:59 GM206 support? Andy Lutomirski
[not found] ` <CALCETrVXm2ypJ1cRRzqwyoq-cowZn47eYv3JHmz7kW5b4TTTtA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-02-14 5:52 ` Ilia Mirkin
[not found] ` <CAKb7Uvi5zxN9_yw9OmuWLWDUz3Ce3xHYK4=fgp8Qp=nZu_N3hA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-02-21 14:28 ` Stefan Huehner [this message]
2015-03-17 21:52 ` Andy Lutomirski
[not found] ` <CALCETrV5XjUxOLvyd2qukJbx0s8+qwE3ivG8s-Koc1VPe_Zezg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-17 21:57 ` Ilia Mirkin
[not found] ` <CAKb7UvgpjeLUn2+kAfPpMaYkuJgYKEosr7uc7BySE2xS0mcQdg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-17 22:40 ` Andy Lutomirski
[not found] ` <CALCETrV7tyDgz7OYw6GCTmk0hLFNhi1bMP+-Eabg5NuxBSXUeA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-17 22:59 ` Ilia Mirkin
[not found] ` <CAKb7UvgAZw2XrmanoMd7emGiBEGC_mC1VT4-7qzqKcb0terNtQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-03-18 10:25 ` Stefan Huehner
[not found] ` <20150318102538.GA30814-Xd65/bSt806pwFb5G8XvHQ@public.gmane.org>
2015-03-18 18:59 ` Andy Lutomirski
2015-03-22 8:19 ` Martin Peres
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54E89626.1050904@huehner.org \
--to=stefan-xd65/bst805afugrpc6u6w@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.