From: Julian Margetson <runaway@candw.ms>
To: linuxppc-dev@lists.ozlabs.org
Subject: Re: Problems with DRI on Acube Sam460 AMCC 460ex board
Date: Mon, 23 Feb 2015 11:07:24 -0400 [thread overview]
Message-ID: <54EB422C.2050401@candw.ms> (raw)
In-Reply-To: <54EB253F.9020704@candw.ms>
[-- Attachment #1: Type: text/plain, Size: 12736 bytes --]
On 2/23/2015 9:03 AM, Julian Margetson wrote:
> On 2/18/2015 10:56 PM, Michael Ellerman wrote:
>> On Wed, 2015-02-18 at 21:36 -0400, Julian Margetson wrote:
>>> On 2/18/2015 8:13 PM, Michael Ellerman wrote:
>>>
>>>> On Wed, 2015-02-18 at 15:45 -0400, Julian Margetson wrote:
>>>>> On 2/15/2015 8:18 PM, Michael Ellerman wrote:
>>>>>
>>>>>> On Sun, 2015-02-15 at 08:16 -0400, Julian Margetson wrote:
>>>>>>> Hi
>>>>>>>
>>>>>>> I am unable to get any kernel beyond the 3.16 branch working on an
>>>>>>> Acube Sam460ex
>>>>>>> AMCC 460ex based motherboard. Kernel up 3.16.7-ckt6 working.
>>>>>> Does reverting b0345bbc6d09 change anything?
>>>>>>
>>>>>>> [ 6.364350] snd_hda_intel 0001:81:00.1: enabling device (0000 -> 0002)
>>>>>>> [ 6.453794] snd_hda_intel 0001:81:00.1: ppc4xx_setup_msi_irqs: fail mapping irq
>>>>>>> [ 6.487530] Unable to handle kernel paging request for data at address 0x0fa06c7c
>>>>>>> [ 6.495055] Faulting instruction address: 0xc032202c
>>>>>>> [ 6.500033] Vector: 300 (Data Access) at [efa31cf0]
>>>>>>> [ 6.504922] pc: c032202c: __reg_op+0xe8/0x100
>>>>>>> [ 6.509697] lr: c0014f88: msi_bitmap_free_hwirqs+0x50/0x94
>>>>>>> [ 6.515600] sp: efa31da0
>>>>>>> [ 6.518491] msr: 21000
>>>>>>> [ 6.521112] dar: fa06c7c
>>>>>>> [ 6.523915] dsisr: 0
>>>>>>> [ 6.526190] current = 0xef8bab00
>>>>>>> [ 6.529603] pid = 115, comm = kworker/0:1
>>>>>>> [ 6.534163] enter ? for help
>>>>>>> [ 6.537054] [link register ] c0014f88 msi_bitmap_free_hwirqs+0x50/0x94
>>>>>>> [ 6.543811] [efa31da0] c0014f78 msi_bitmap_free_hwirqs+0x40/0x94 (unreliable)
>>>>>>> [ 6.551001] [efa31dc0] c001aee8 ppc4xx_setup_msi_irqs+0xac/0xf4
>>>>>>> [ 6.556973] [efa31e00] c03503a4 pci_enable_msi_range+0x1e0/0x280
>>>>>>> [ 6.563032] [efa31e40] f92c2f74 azx_probe_work+0xe0/0x57c [snd_hda_intel]
>>>>>>> [ 6.569906] [efa31e80] c0036344 process_one_work+0x1e8/0x2f0
>>>>>>> [ 6.575627] [efa31eb0] c003677c worker_thread+0x2f4/0x438
>>>>>>> [ 6.581079] [efa31ef0] c003a3e4 kthread+0xc8/0xcc
>>>>>>> [ 6.585844] [efa31f40] c000aec4 ret_from_kernel_thread+0x5c/0x64
>>>>>>> [ 6.591910] mon> <no input ...>
>>>>> Managed to do a third git bisect with the following results .
>>>> Great work.
>>>>
>>>>> git bisect bad
>>>>> 9279d3286e10736766edcaf815ae10e00856e448 is the first bad commit
>>>>> commit 9279d3286e10736766edcaf815ae10e00856e448
>>>>> Author: Rasmus Villemoes<linux@rasmusvillemoes.dk>
>>>>> Date: Wed Aug 6 16:10:16 2014 -0700
>>>>>
>>>>> lib: bitmap: change parameter of bitmap_*_region to unsigned
>>>> So the bug is in the 4xx MSI code, and has always been there, in fact I don't
>>>> see how that code has *ever* worked. The commit you bisected to just caused the
>>>> existing bug to cause an oops.
>>>>
>>>> Can you try this?
>>>>
>>>> diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c
>>>> index 6e2e6aa378bb..effb5b878a78 100644
>>>> --- a/arch/powerpc/sysdev/ppc4xx_msi.c
>>>> +++ b/arch/powerpc/sysdev/ppc4xx_msi.c
>>>> @@ -95,11 +95,9 @@ static int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
>>>>
>>>> list_for_each_entry(entry, &dev->msi_list, list) {
>>>> int_no = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1);
>>>> - if (int_no >= 0)
>>>> - break;
>>>> if (int_no < 0) {
>>>> - pr_debug("%s: fail allocating msi interrupt\n",
>>>> - __func__);
>>>> + pr_warn("%s: fail allocating msi interrupt\n", __func__);
>>>> + return -ENOSPC;
>>>> }
>>>> virq = irq_of_parse_and_map(msi_data->msi_dev, int_no);
>>>> if (virq == NO_IRQ) {
>>>>
>>> Thanks.
>>> This works with 3.17-rc1. Will try with the 3.18 Branch .
>> OK great.
>>
>>> Any ideas why drm is not working ? (It never worked) .
>> No sorry. You might have more luck if you post a new thread to the dri list.
>>
>>> [ 5.809802] Linux agpgart interface v0.103
>>> [ 6.137893] [drm] Initialized drm 1.1.0 20060810
>>> [ 6.439872] snd_hda_intel 0001:81:00.1: enabling device (0000 -> 0002)
>>> [ 6.508544] ppc4xx_setup_msi_irqs: fail allocating msi interrupt
>> I'm curious why it's failing to allocate MSIs. Possibly it's just run out.
>>
>> Can you post the output of 'cat /proc/interrupts'?
>>
>> cheers
>>
>>
>>
>
>
> cat /proc/interrupts
> CPU0
> 18: 0 UIC 11 Edge L2C
> 19: 0 UIC 12 Level snd_ice1724
> 20: 1 UIC 16 Level
> 21: 306 UIC 17 Level snd_hda_intel
> 22: 12212 UIC 0 Level 0002:00:04.0
> 25: 619 UIC 6 Level MAL TX EOB
> 26: 937 UIC 7 Level MAL RX EOB
> 27: 0 UIC 3 Level MAL SERR
> 28: 0 UIC 4 Level MAL TX DE
> 31: 0 UIC 5 Level MAL RX DE
> 32: 6607 UIC 29 Level ehci_hcd:usb1
> 33: 1 UIC 30 Level ohci_hcd:usb2
> 38: 19 UIC 2 Level IBM IIC
> 39: 0 UIC 3 Level IBM IIC
> 40: 0 UIC 16 Level EMAC
> 44: 0 UIC 0 Edge aerdrv
> 45: 0 UIC 2 Edge aerdrv
> LOC: 117318 Local timer interrupts for timer event device
> LOC: 53 Local timer interrupts for others
> SPU: 0 Spurious interrupts
> PMI: 0 Performance monitoring interrupts
> MCE: 0 Machine check exceptions
>
> More issues with Kernel 4.0.0-rc1
>
> [ 33.535692] Unable to handle kernel paging request for data at address 0x00000008
> [ 33.566786] Faulting instruction address: 0xc049db84
> [ 33.574188] Vector: 300 (Data Access) at [eeb13c20]
> [ 33.579086] pc: c049db84: radeon_audio_enable+0x4/0x18
> [ 33.584630] lr: c049e2f4: radeon_audio_detect+0x288/0x290
> [ 33.590429] sp: eeb13cd0
> [ 33.593310] msr: 29000
> [ 33.595931] dar: 8
> [ 33.598207] dsisr: 0
> [ 33.600480] current = 0xeea93ac0
> [ 33.603885] pid = 2311, comm = Xorg
> [ 33.607922] enter ? for help
> [ 33.610806] [link register ] c049e2f4 radeon_audio_detect+0x288/0x290
> [ 33.617469] [eeb13cd0] c049e254 radeon_audio_detect+0x1e8/0x290 (unreliable)
> [ 33.624571] [eeb13d00] c03dfe7c radeon_dvi_detect+0x388/0x3ac
> [ 33.630369] [eeb13d30] c038b9d4 drm_helper_probe_single_connector_modes_merge_bits+0xf4/0x434
> [ 33.638954] [eeb13d70] c03a7670 drm_mode_getconnector+0xf4/0x334
> [ 33.645022] [eeb13e10] c039a8c0 drm_ioctl+0x348/0x464
> [ 33.650135] [eeb13ed0] c00d0ca0 do_vfs_ioctl+0x52c/0x6e8
> [ 33.655507] [eeb13f20] c00d0e9c SyS_ioctl+0x40/0x68
> [ 33.660438] [eeb13f40] c000ab04 ret_from_syscall+0x0/0x3c
> [ 33.665896] --- Exception: c01 (System Call) at 6fb1b8dc
> [ 33.671253] SP (bfa56d20) is in userspace
> [ 33.675263] mon> <no input ...>
> [ 35.703835] Oops: Kernel access of bad area, sig: 11 [#1]
> [ 35.709554] PREEMPT Canyonlands
> [ 35.712876] Modules linked in: cfg80211 snd_ice1724 snd_hda_codec_hdmi snd_ak4113 snd_pt2258 snd_ak4114 snd_i2c snd_ice17xx_ak4xxx snd_ak4xxx_adda snd_ac97_codec snd_hda_intel ac97_bus snd_hda_controller snd_rawmidi snd_hda_codec snd_seq_device snd_pcm snd_timer snd
> [ 35.738047] CPU: 0 PID: 2311 Comm: Xorg Not tainted 4.0.0-rc1-Sam460ex #1
> [ 35.745189] task: eea93ac0 ti: eeb12000 task.ti: eeb12000
> [ 35.750872] NIP: c049db84 LR: c049e2f4 CTR: 00000000
> [ 35.756098] REGS: eeb13c20 TRAP: 0300 Not tainted (4.0.0-rc1-Sam460ex)
> [ 35.763241] MSR: 00029000 <CE,EE,ME> CR: 24004422 XER: 20000000
> [ 35.769778] DEAR: 00000008 ESR: 00000000
> GPR00: c049e254 eeb13cd0 eea93ac0 eaa84000 00000000 0000000f ee0532c0 000190d6
> GPR08: eab6da00 00000000 00000000 eeb13cb0 28004422 b7a11ff4 b7a87a98 b7a87988
> GPR16: 00000000 ffffffff 00000000 eeb13e18 eaa08194 eaa08178 00000001 00004000
> GPR24: 00004000 c071cd28 fffffff2 00000000 eab6c000 eaa84000 eab6da00 eab80400
> [ 35.804302] NIP [c049db84] radeon_audio_enable+0x4/0x18
> [ 35.809799] LR [c049e2f4] radeon_audio_detect+0x288/0x290
> [ 35.815480] Call Trace:
> [ 35.818053] [eeb13cd0] [c049e254] radeon_audio_detect+0x1e8/0x290 (unreliable)
> [ 35.825694] [eeb13d00] [c03dfe7c] radeon_dvi_detect+0x388/0x3ac
> [ 35.831956] [eeb13d30] [c038b9d4] drm_helper_probe_single_connector_modes_merge_bits+0xf4/0x434
> [ 35.841137] [eeb13d70] [c03a7670] drm_mode_getconnector+0xf4/0x334
> [ 35.847663] [eeb13e10] [c039a8c0] drm_ioctl+0x348/0x464
> [ 35.853183] [eeb13ed0] [c00d0ca0] do_vfs_ioctl+0x52c/0x6e8
> [ 35.858974] [eeb13f20] [c00d0e9c] SyS_ioctl+0x40/0x68
> [ 35.864307] [eeb13f40] [c000ab04] ret_from_syscall+0x0/0x3c
> [ 35.870196] --- interrupt: c01 at 0x6fb1b8dc
> [ 35.870196] LR = 0x6fb1b800
> [ 35.877971] Instruction dump:
> [ 35.881106] 8129012c 806a0018 2f890000 419e0018 81290004 2f890000 419e000c 7d2903a6
> [ 35.889403] 4e800420 38600000 4e800020 81231c70 <81290008> 2f890000 4d9e0020 7d2903a6
> [ 36.042121] ---[ end trace 3e83f5fa0d05c678 ]---
> [ 36.046739]
>
With Kernel 3.19
[ 2.454668] Linux agpgart interface v0.103
[ 2.458979] [drm] Initialized drm 1.1.0 20060810
[ 2.463814] [drm] radeon kernel modesetting enabled.
[ 2.469870] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x1682:0x318B).
[ 2.478007] [drm] register mmio base: 0xe90000000
[ 2.482774] [drm] register mmio size: 131072
[ 2.665432] ATOM BIOS: TURKS
[ 2.668602] radeon 0001:81:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.677521] radeon 0001:81:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 2.685201] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.690094] [drm] RAM width 128bits DDR
[ 2.694109] [TTM] Zone kernel: Available graphics memory: 379192 kiB
[ 2.700596] [TTM] Zone highmem: Available graphics memory: 1034552 kiB
[ 2.707147] [TTM] Initializing pool allocator
[ 2.711540] [TTM] Initializing DMA pool allocator
[ 2.716359] [drm] radeon: 1024M of VRAM memory ready
[ 2.721355] [drm] radeon: 1024M of GTT memory ready.
[ 2.726395] [drm] Loading TURKS Microcode
[ 2.730457] [drm] Internal thermal controller with fan control
[ 2.741697] [drm] radeon: dpm initialized
[ 2.745907] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 2.787690] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 2.794953] radeon 0001:81:00.0: WB enabled
[ 2.799182] radeon 0001:81:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffc01c00
[ 2.809300] radeon 0001:81:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffc01c0c
[ 2.839260] radeon 0001:81:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf9032118
[ 2.849411] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.856067] [drm] Driver supports precise vblank timestamp query.
[ 2.862183] radeon 0001:81:00.0: radeon: MSI limited to 32-bit
[ 2.868058] ppc4xx_setup_msi_irqs: fail allocating msi interrupt
[ 2.874153] [drm] radeon: irq initialized.
[ 3.103973] [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD)
[ 3.112806] radeon 0001:81:00.0: disabling GPU acceleration
[ 3.128627] [drm] Radeon Display Connectors
[ 3.133369] [drm] Connector 0:
[ 3.136481] [drm] DP-1
[ 3.139089] [drm] HPD1
[ 3.141665] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 3.149146] [drm] Encoders:
[ 3.152157] [drm] DFP1: INTERNAL_UNIPHY2
[ 3.156473] [drm] Connector 1:
[ 3.159570] [drm] HDMI-A-1
[ 3.162469] [drm] HPD5
[ 3.165019] [drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[ 3.172436] [drm] Encoders:
[ 3.175415] [drm] DFP2: INTERNAL_UNIPHY2
[ 3.179703] [drm] Connector 2:
[ 3.182766] [drm] DVI-I-1
[ 3.185570] [drm] HPD4
[ 3.188117] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 3.195535] [drm] Encoders:
[ 3.198513] [drm] DFP3: INTERNAL_UNIPHY
[ 3.202706] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 3.352245] [drm] fb mappable at 0x80475000
[ 3.356458] [drm] vram apper at 0x80000000
[ 3.360570] [drm] size 8294400
[ 3.363634] [drm] fb depth is 24
[ 3.366873] [drm] pitch is 7680
[ 3.575080] Console: switching to colour frame buffer device 240x67
[ 3.649278] radeon 0001:81:00.0: fb0: radeondrmfb frame buffer device
[ 3.656071] radeon 0001:81:00.0: registered panic notifier
[ 3.666472] [drm] Initialized radeon 2.40.0 20080528 for 0001:81:00.0 on minor 0
attempting to post this on dri-devel-request@lists.freedesktop.org
[-- Attachment #2: Type: text/html, Size: 15125 bytes --]
next prev parent reply other threads:[~2015-02-23 15:07 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-15 12:16 Problems with Kernels 3.17-rc1 and onwards on Acube Sam460 AMCC 460ex board Julian Margetson
2015-02-16 0:18 ` Michael Ellerman
2015-02-18 19:45 ` Julian Margetson
2015-02-19 0:13 ` Michael Ellerman
2015-02-19 1:36 ` Julian Margetson
2015-02-19 2:56 ` Michael Ellerman
2015-02-19 3:25 ` Julian Margetson
2015-02-20 19:25 ` Julian Margetson
2015-02-24 0:32 ` Michael Ellerman
2015-02-24 2:22 ` Julian Margetson
2015-02-24 11:08 ` Julian Margetson
2015-02-24 19:14 ` Gerhard Pircher
2015-02-24 20:26 ` Julian Margetson
2015-02-25 13:26 ` Julian Margetson
2015-02-25 13:32 ` Julian Margetson
2015-03-04 11:46 ` Julian Margetson
2015-03-04 23:52 ` Michael Ellerman
2015-03-05 11:15 ` Julian Margetson
2015-03-07 16:10 ` Julian Margetson
2015-03-10 0:30 ` Michael Ellerman
2015-03-10 0:53 ` Julian Margetson
[not found] ` <45dfe4c8990.73f22654@smtp.gmail.com>
2015-02-24 19:05 ` Julian Margetson
2015-02-19 15:57 ` Julian Margetson
[not found] ` <54EB253F.9020704@candw.ms>
2015-02-23 15:07 ` Julian Margetson [this message]
2015-02-23 17:43 ` Problems with DRI " Julian Margetson
2015-02-24 11:12 ` Julian Margetson
2015-02-24 18:57 ` Julian Margetson
2015-02-24 20:28 ` Julian Margetson
2015-02-25 13:25 ` Julian Margetson
2015-02-25 13:31 ` Julian Margetson
2015-03-07 16:05 ` Julian Margetson
2016-02-02 13:54 ` commit 9178ba294b6839eeff1a91bed95515d783f3ee6c Julian Margetson
2016-08-05 11:26 ` Problems with Kernels 3.17-rc1 and onwards on Acube Sam460 AMCC 460ex board Julian Margetson
2015-02-19 2:20 ` Julian Margetson
2015-02-18 20:13 ` Julian Margetson
2015-04-27 10:59 ` Kernel 4.1-rc1 build fails on Sam460ex amcc 460ex powerpc Canyonlands Julian Margetson
2015-04-28 1:12 ` Michael Ellerman
2015-04-28 3:49 ` Tejun Heo
2015-05-04 17:18 ` Andy Shevchenko
2015-05-04 18:13 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54EB422C.2050401@candw.ms \
--to=runaway@candw.ms \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.