From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Bagg Date: Mon, 23 Feb 2015 10:23:39 -0500 Subject: [ath9k-devel] AR9004 scan in AP mode? In-Reply-To: References: <54E79DD7.7070905@lenbrook.com> Message-ID: <54EB45FB.9040403@lenbrook.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On 15-02-23 12:54 AM, Janusz Dziedzic wrote: > On 20 February 2015 at 21:49, Jonathan Bagg wrote: >> I'm evaluating the AR9485 and AR9462 using a 3.18.0 kernel. I am not >> able to scan (iw wlan0 scan) when the devices are in AP mode. I'm >> wondering if this not possible because the AR9485 and AR9462 lack >> hardware / firmware or is it a limitation of the ath9k driver that could >> be added at some point? >> > try iw wlan0 scan ap-force > > BR > Janusz iw wlan0 scan ap-force works great! I didn't know that one, Thanks -- Jonathan Bagg Embedded Systems Developer NAD Electronics | Lenbrook Industries Limited 633 Granite Court, Pickering, Ontario, Canada L1W 3K1 | 905-831-0799 ext 4478 | http://www.nadelectronics.com