From: patrice.chotard@st.com (Patrice Chotard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: STi: DT: Move reset controller constants into common location
Date: Mon, 23 Feb 2015 16:46:56 +0100 [thread overview]
Message-ID: <54EB4B70.60908@st.com> (raw)
In-Reply-To: <1424180557-15750-1-git-send-email-p.zabel@pengutronix.de>
Hi Philipp
On 02/17/2015 02:42 PM, Philipp Zabel wrote:
> By popular vote, the DT binding includes for reset controllers are located
> in include/dt-bindings/reset/. Move the STi reset constants in there, too,
> to avoid confusion.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> .../bindings/reset/st,sti-picophyreset.txt | 2 +-
> .../devicetree/bindings/reset/st,sti-powerdown.txt | 4 +-
> .../devicetree/bindings/reset/st,sti-softreset.txt | 4 +-
> arch/arm/boot/dts/stih407-family.dtsi | 2 +-
> arch/arm/boot/dts/stih415.dtsi | 2 +-
> arch/arm/boot/dts/stih416.dtsi | 2 +-
> drivers/reset/sti/reset-stih407.c | 2 +-
> drivers/reset/sti/reset-stih415.c | 2 +-
> drivers/reset/sti/reset-stih416.c | 2 +-
> .../dt-bindings/reset-controller/stih407-resets.h | 61 ----------------------
> .../dt-bindings/reset-controller/stih415-resets.h | 27 ----------
> .../dt-bindings/reset-controller/stih416-resets.h | 51 ------------------
> include/dt-bindings/reset/stih407-resets.h | 61 ++++++++++++++++++++++
> include/dt-bindings/reset/stih415-resets.h | 27 ++++++++++
> include/dt-bindings/reset/stih416-resets.h | 51 ++++++++++++++++++
> 15 files changed, 150 insertions(+), 150 deletions(-)
> delete mode 100644 include/dt-bindings/reset-controller/stih407-resets.h
> delete mode 100644 include/dt-bindings/reset-controller/stih415-resets.h
> delete mode 100644 include/dt-bindings/reset-controller/stih416-resets.h
> create mode 100644 include/dt-bindings/reset/stih407-resets.h
> create mode 100644 include/dt-bindings/reset/stih415-resets.h
> create mode 100644 include/dt-bindings/reset/stih416-resets.h
>
> diff --git a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
> index 54ae9f7..9ca2776 100644
> --- a/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
> +++ b/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
> @@ -39,4 +39,4 @@ Example:
> };
>
> Macro definitions for the supported reset channels can be found in:
> -include/dt-bindings/reset-controller/stih407-resets.h
> +include/dt-bindings/reset/stih407-resets.h
> diff --git a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
> index 5ab26b7..1cfd21d 100644
> --- a/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
> +++ b/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
> @@ -43,5 +43,5 @@ example:
>
> Macro definitions for the supported reset channels can be found in:
>
> -include/dt-bindings/reset-controller/stih415-resets.h
> -include/dt-bindings/reset-controller/stih416-resets.h
> +include/dt-bindings/reset/stih415-resets.h
> +include/dt-bindings/reset/stih416-resets.h
> diff --git a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
> index a8d3d3c..891a2fd 100644
> --- a/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
> +++ b/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
> @@ -42,5 +42,5 @@ example:
>
> Macro definitions for the supported reset channels can be found in:
>
> -include/dt-bindings/reset-controller/stih415-resets.h
> -include/dt-bindings/reset-controller/stih416-resets.h
> +include/dt-bindings/reset/stih415-resets.h
> +include/dt-bindings/reset/stih416-resets.h
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index 3e31d32..ef71851 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -7,7 +7,7 @@
> * publishhed by the Free Software Foundation.
> */
> #include "stih407-pinctrl.dtsi"
> -#include <dt-bindings/reset-controller/stih407-resets.h>
> +#include <dt-bindings/reset/stih407-resets.h>
> / {
> #address-cells = <1>;
> #size-cells = <1>;
> diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
> index 9198c12..95fd0a5 100644
> --- a/arch/arm/boot/dts/stih415.dtsi
> +++ b/arch/arm/boot/dts/stih415.dtsi
> @@ -10,7 +10,7 @@
> #include "stih415-clock.dtsi"
> #include "stih415-pinctrl.dtsi"
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> -#include <dt-bindings/reset-controller/stih415-resets.h>
> +#include <dt-bindings/reset/stih415-resets.h>
> / {
>
> L2: cache-controller {
> diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
> index fad9073..03924a4 100644
> --- a/arch/arm/boot/dts/stih416.dtsi
> +++ b/arch/arm/boot/dts/stih416.dtsi
> @@ -12,7 +12,7 @@
>
> #include <dt-bindings/phy/phy-miphy365x.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> -#include <dt-bindings/reset-controller/stih416-resets.h>
> +#include <dt-bindings/reset/stih416-resets.h>
> / {
> L2: cache-controller {
> compatible = "arm,pl310-cache";
> diff --git a/drivers/reset/sti/reset-stih407.c b/drivers/reset/sti/reset-stih407.c
> index d83db5d7..f7a6cb0 100644
> --- a/drivers/reset/sti/reset-stih407.c
> +++ b/drivers/reset/sti/reset-stih407.c
> @@ -11,7 +11,7 @@
> #include <linux/of.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> -#include <dt-bindings/reset-controller/stih407-resets.h>
> +#include <dt-bindings/reset/stih407-resets.h>
> #include "reset-syscfg.h"
>
> /* STiH407 Peripheral powerdown definitions. */
> diff --git a/drivers/reset/sti/reset-stih415.c b/drivers/reset/sti/reset-stih415.c
> index 8dad603..f7b49d5 100644
> --- a/drivers/reset/sti/reset-stih415.c
> +++ b/drivers/reset/sti/reset-stih415.c
> @@ -13,7 +13,7 @@
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
>
> -#include <dt-bindings/reset-controller/stih415-resets.h>
> +#include <dt-bindings/reset/stih415-resets.h>
>
> #include "reset-syscfg.h"
>
> diff --git a/drivers/reset/sti/reset-stih416.c b/drivers/reset/sti/reset-stih416.c
> index 79aed70..d65a82e 100644
> --- a/drivers/reset/sti/reset-stih416.c
> +++ b/drivers/reset/sti/reset-stih416.c
> @@ -13,7 +13,7 @@
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
>
> -#include <dt-bindings/reset-controller/stih416-resets.h>
> +#include <dt-bindings/reset/stih416-resets.h>
>
> #include "reset-syscfg.h"
>
> diff --git a/include/dt-bindings/reset-controller/stih407-resets.h b/include/dt-bindings/reset-controller/stih407-resets.h
> deleted file mode 100644
> index 02d4328..0000000
> --- a/include/dt-bindings/reset-controller/stih407-resets.h
> +++ /dev/null
> @@ -1,61 +0,0 @@
> -/*
> - * This header provides constants for the reset controller
> - * based peripheral powerdown requests on the STMicroelectronics
> - * STiH407 SoC.
> - */
> -#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH407
> -#define _DT_BINDINGS_RESET_CONTROLLER_STIH407
> -
> -/* Powerdown requests control 0 */
> -#define STIH407_EMISS_POWERDOWN 0
> -#define STIH407_NAND_POWERDOWN 1
> -
> -/* Synp GMAC PowerDown */
> -#define STIH407_ETH1_POWERDOWN 2
> -
> -/* Powerdown requests control 1 */
> -#define STIH407_USB3_POWERDOWN 3
> -#define STIH407_USB2_PORT1_POWERDOWN 4
> -#define STIH407_USB2_PORT0_POWERDOWN 5
> -#define STIH407_PCIE1_POWERDOWN 6
> -#define STIH407_PCIE0_POWERDOWN 7
> -#define STIH407_SATA1_POWERDOWN 8
> -#define STIH407_SATA0_POWERDOWN 9
> -
> -/* Reset defines */
> -#define STIH407_ETH1_SOFTRESET 0
> -#define STIH407_MMC1_SOFTRESET 1
> -#define STIH407_PICOPHY_SOFTRESET 2
> -#define STIH407_IRB_SOFTRESET 3
> -#define STIH407_PCIE0_SOFTRESET 4
> -#define STIH407_PCIE1_SOFTRESET 5
> -#define STIH407_SATA0_SOFTRESET 6
> -#define STIH407_SATA1_SOFTRESET 7
> -#define STIH407_MIPHY0_SOFTRESET 8
> -#define STIH407_MIPHY1_SOFTRESET 9
> -#define STIH407_MIPHY2_SOFTRESET 10
> -#define STIH407_SATA0_PWR_SOFTRESET 11
> -#define STIH407_SATA1_PWR_SOFTRESET 12
> -#define STIH407_DELTA_SOFTRESET 13
> -#define STIH407_BLITTER_SOFTRESET 14
> -#define STIH407_HDTVOUT_SOFTRESET 15
> -#define STIH407_HDQVDP_SOFTRESET 16
> -#define STIH407_VDP_AUX_SOFTRESET 17
> -#define STIH407_COMPO_SOFTRESET 18
> -#define STIH407_HDMI_TX_PHY_SOFTRESET 19
> -#define STIH407_JPEG_DEC_SOFTRESET 20
> -#define STIH407_VP8_DEC_SOFTRESET 21
> -#define STIH407_GPU_SOFTRESET 22
> -#define STIH407_HVA_SOFTRESET 23
> -#define STIH407_ERAM_HVA_SOFTRESET 24
> -#define STIH407_LPM_SOFTRESET 25
> -#define STIH407_KEYSCAN_SOFTRESET 26
> -#define STIH407_USB2_PORT0_SOFTRESET 27
> -#define STIH407_USB2_PORT1_SOFTRESET 28
> -
> -/* Picophy reset defines */
> -#define STIH407_PICOPHY0_RESET 0
> -#define STIH407_PICOPHY1_RESET 1
> -#define STIH407_PICOPHY2_RESET 2
> -
> -#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH407 */
> diff --git a/include/dt-bindings/reset-controller/stih415-resets.h b/include/dt-bindings/reset-controller/stih415-resets.h
> deleted file mode 100644
> index c2329fe..0000000
> --- a/include/dt-bindings/reset-controller/stih415-resets.h
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -/*
> - * This header provides constants for the reset controller
> - * based peripheral powerdown requests on the STMicroelectronics
> - * STiH415 SoC.
> - */
> -#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH415
> -#define _DT_BINDINGS_RESET_CONTROLLER_STIH415
> -
> -#define STIH415_EMISS_POWERDOWN 0
> -#define STIH415_NAND_POWERDOWN 1
> -#define STIH415_KEYSCAN_POWERDOWN 2
> -#define STIH415_USB0_POWERDOWN 3
> -#define STIH415_USB1_POWERDOWN 4
> -#define STIH415_USB2_POWERDOWN 5
> -#define STIH415_SATA0_POWERDOWN 6
> -#define STIH415_SATA1_POWERDOWN 7
> -#define STIH415_PCIE_POWERDOWN 8
> -
> -#define STIH415_ETH0_SOFTRESET 0
> -#define STIH415_ETH1_SOFTRESET 1
> -#define STIH415_IRB_SOFTRESET 2
> -#define STIH415_USB0_SOFTRESET 3
> -#define STIH415_USB1_SOFTRESET 4
> -#define STIH415_USB2_SOFTRESET 5
> -#define STIH415_KEYSCAN_SOFTRESET 6
> -
> -#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */
> diff --git a/include/dt-bindings/reset-controller/stih416-resets.h b/include/dt-bindings/reset-controller/stih416-resets.h
> deleted file mode 100644
> index fcf9af1..0000000
> --- a/include/dt-bindings/reset-controller/stih416-resets.h
> +++ /dev/null
> @@ -1,51 +0,0 @@
> -/*
> - * This header provides constants for the reset controller
> - * based peripheral powerdown requests on the STMicroelectronics
> - * STiH416 SoC.
> - */
> -#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH416
> -#define _DT_BINDINGS_RESET_CONTROLLER_STIH416
> -
> -#define STIH416_EMISS_POWERDOWN 0
> -#define STIH416_NAND_POWERDOWN 1
> -#define STIH416_KEYSCAN_POWERDOWN 2
> -#define STIH416_USB0_POWERDOWN 3
> -#define STIH416_USB1_POWERDOWN 4
> -#define STIH416_USB2_POWERDOWN 5
> -#define STIH416_USB3_POWERDOWN 6
> -#define STIH416_SATA0_POWERDOWN 7
> -#define STIH416_SATA1_POWERDOWN 8
> -#define STIH416_PCIE0_POWERDOWN 9
> -#define STIH416_PCIE1_POWERDOWN 10
> -
> -#define STIH416_ETH0_SOFTRESET 0
> -#define STIH416_ETH1_SOFTRESET 1
> -#define STIH416_IRB_SOFTRESET 2
> -#define STIH416_USB0_SOFTRESET 3
> -#define STIH416_USB1_SOFTRESET 4
> -#define STIH416_USB2_SOFTRESET 5
> -#define STIH416_USB3_SOFTRESET 6
> -#define STIH416_SATA0_SOFTRESET 7
> -#define STIH416_SATA1_SOFTRESET 8
> -#define STIH416_PCIE0_SOFTRESET 9
> -#define STIH416_PCIE1_SOFTRESET 10
> -#define STIH416_AUD_DAC_SOFTRESET 11
> -#define STIH416_HDTVOUT_SOFTRESET 12
> -#define STIH416_VTAC_M_RX_SOFTRESET 13
> -#define STIH416_VTAC_A_RX_SOFTRESET 14
> -#define STIH416_SYNC_HD_SOFTRESET 15
> -#define STIH416_SYNC_SD_SOFTRESET 16
> -#define STIH416_BLITTER_SOFTRESET 17
> -#define STIH416_GPU_SOFTRESET 18
> -#define STIH416_VTAC_M_TX_SOFTRESET 19
> -#define STIH416_VTAC_A_TX_SOFTRESET 20
> -#define STIH416_VTG_AUX_SOFTRESET 21
> -#define STIH416_JPEG_DEC_SOFTRESET 22
> -#define STIH416_HVA_SOFTRESET 23
> -#define STIH416_COMPO_M_SOFTRESET 24
> -#define STIH416_COMPO_A_SOFTRESET 25
> -#define STIH416_VP8_DEC_SOFTRESET 26
> -#define STIH416_VTG_MAIN_SOFTRESET 27
> -#define STIH416_KEYSCAN_SOFTRESET 28
> -
> -#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH416 */
> diff --git a/include/dt-bindings/reset/stih407-resets.h b/include/dt-bindings/reset/stih407-resets.h
> new file mode 100644
> index 0000000..02d4328
> --- /dev/null
> +++ b/include/dt-bindings/reset/stih407-resets.h
> @@ -0,0 +1,61 @@
> +/*
> + * This header provides constants for the reset controller
> + * based peripheral powerdown requests on the STMicroelectronics
> + * STiH407 SoC.
> + */
> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH407
> +#define _DT_BINDINGS_RESET_CONTROLLER_STIH407
> +
> +/* Powerdown requests control 0 */
> +#define STIH407_EMISS_POWERDOWN 0
> +#define STIH407_NAND_POWERDOWN 1
> +
> +/* Synp GMAC PowerDown */
> +#define STIH407_ETH1_POWERDOWN 2
> +
> +/* Powerdown requests control 1 */
> +#define STIH407_USB3_POWERDOWN 3
> +#define STIH407_USB2_PORT1_POWERDOWN 4
> +#define STIH407_USB2_PORT0_POWERDOWN 5
> +#define STIH407_PCIE1_POWERDOWN 6
> +#define STIH407_PCIE0_POWERDOWN 7
> +#define STIH407_SATA1_POWERDOWN 8
> +#define STIH407_SATA0_POWERDOWN 9
> +
> +/* Reset defines */
> +#define STIH407_ETH1_SOFTRESET 0
> +#define STIH407_MMC1_SOFTRESET 1
> +#define STIH407_PICOPHY_SOFTRESET 2
> +#define STIH407_IRB_SOFTRESET 3
> +#define STIH407_PCIE0_SOFTRESET 4
> +#define STIH407_PCIE1_SOFTRESET 5
> +#define STIH407_SATA0_SOFTRESET 6
> +#define STIH407_SATA1_SOFTRESET 7
> +#define STIH407_MIPHY0_SOFTRESET 8
> +#define STIH407_MIPHY1_SOFTRESET 9
> +#define STIH407_MIPHY2_SOFTRESET 10
> +#define STIH407_SATA0_PWR_SOFTRESET 11
> +#define STIH407_SATA1_PWR_SOFTRESET 12
> +#define STIH407_DELTA_SOFTRESET 13
> +#define STIH407_BLITTER_SOFTRESET 14
> +#define STIH407_HDTVOUT_SOFTRESET 15
> +#define STIH407_HDQVDP_SOFTRESET 16
> +#define STIH407_VDP_AUX_SOFTRESET 17
> +#define STIH407_COMPO_SOFTRESET 18
> +#define STIH407_HDMI_TX_PHY_SOFTRESET 19
> +#define STIH407_JPEG_DEC_SOFTRESET 20
> +#define STIH407_VP8_DEC_SOFTRESET 21
> +#define STIH407_GPU_SOFTRESET 22
> +#define STIH407_HVA_SOFTRESET 23
> +#define STIH407_ERAM_HVA_SOFTRESET 24
> +#define STIH407_LPM_SOFTRESET 25
> +#define STIH407_KEYSCAN_SOFTRESET 26
> +#define STIH407_USB2_PORT0_SOFTRESET 27
> +#define STIH407_USB2_PORT1_SOFTRESET 28
> +
> +/* Picophy reset defines */
> +#define STIH407_PICOPHY0_RESET 0
> +#define STIH407_PICOPHY1_RESET 1
> +#define STIH407_PICOPHY2_RESET 2
> +
> +#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH407 */
> diff --git a/include/dt-bindings/reset/stih415-resets.h b/include/dt-bindings/reset/stih415-resets.h
> new file mode 100644
> index 0000000..c2329fe
> --- /dev/null
> +++ b/include/dt-bindings/reset/stih415-resets.h
> @@ -0,0 +1,27 @@
> +/*
> + * This header provides constants for the reset controller
> + * based peripheral powerdown requests on the STMicroelectronics
> + * STiH415 SoC.
> + */
> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH415
> +#define _DT_BINDINGS_RESET_CONTROLLER_STIH415
> +
> +#define STIH415_EMISS_POWERDOWN 0
> +#define STIH415_NAND_POWERDOWN 1
> +#define STIH415_KEYSCAN_POWERDOWN 2
> +#define STIH415_USB0_POWERDOWN 3
> +#define STIH415_USB1_POWERDOWN 4
> +#define STIH415_USB2_POWERDOWN 5
> +#define STIH415_SATA0_POWERDOWN 6
> +#define STIH415_SATA1_POWERDOWN 7
> +#define STIH415_PCIE_POWERDOWN 8
> +
> +#define STIH415_ETH0_SOFTRESET 0
> +#define STIH415_ETH1_SOFTRESET 1
> +#define STIH415_IRB_SOFTRESET 2
> +#define STIH415_USB0_SOFTRESET 3
> +#define STIH415_USB1_SOFTRESET 4
> +#define STIH415_USB2_SOFTRESET 5
> +#define STIH415_KEYSCAN_SOFTRESET 6
> +
> +#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */
> diff --git a/include/dt-bindings/reset/stih416-resets.h b/include/dt-bindings/reset/stih416-resets.h
> new file mode 100644
> index 0000000..fcf9af1
> --- /dev/null
> +++ b/include/dt-bindings/reset/stih416-resets.h
> @@ -0,0 +1,51 @@
> +/*
> + * This header provides constants for the reset controller
> + * based peripheral powerdown requests on the STMicroelectronics
> + * STiH416 SoC.
> + */
> +#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH416
> +#define _DT_BINDINGS_RESET_CONTROLLER_STIH416
> +
> +#define STIH416_EMISS_POWERDOWN 0
> +#define STIH416_NAND_POWERDOWN 1
> +#define STIH416_KEYSCAN_POWERDOWN 2
> +#define STIH416_USB0_POWERDOWN 3
> +#define STIH416_USB1_POWERDOWN 4
> +#define STIH416_USB2_POWERDOWN 5
> +#define STIH416_USB3_POWERDOWN 6
> +#define STIH416_SATA0_POWERDOWN 7
> +#define STIH416_SATA1_POWERDOWN 8
> +#define STIH416_PCIE0_POWERDOWN 9
> +#define STIH416_PCIE1_POWERDOWN 10
> +
> +#define STIH416_ETH0_SOFTRESET 0
> +#define STIH416_ETH1_SOFTRESET 1
> +#define STIH416_IRB_SOFTRESET 2
> +#define STIH416_USB0_SOFTRESET 3
> +#define STIH416_USB1_SOFTRESET 4
> +#define STIH416_USB2_SOFTRESET 5
> +#define STIH416_USB3_SOFTRESET 6
> +#define STIH416_SATA0_SOFTRESET 7
> +#define STIH416_SATA1_SOFTRESET 8
> +#define STIH416_PCIE0_SOFTRESET 9
> +#define STIH416_PCIE1_SOFTRESET 10
> +#define STIH416_AUD_DAC_SOFTRESET 11
> +#define STIH416_HDTVOUT_SOFTRESET 12
> +#define STIH416_VTAC_M_RX_SOFTRESET 13
> +#define STIH416_VTAC_A_RX_SOFTRESET 14
> +#define STIH416_SYNC_HD_SOFTRESET 15
> +#define STIH416_SYNC_SD_SOFTRESET 16
> +#define STIH416_BLITTER_SOFTRESET 17
> +#define STIH416_GPU_SOFTRESET 18
> +#define STIH416_VTAC_M_TX_SOFTRESET 19
> +#define STIH416_VTAC_A_TX_SOFTRESET 20
> +#define STIH416_VTG_AUX_SOFTRESET 21
> +#define STIH416_JPEG_DEC_SOFTRESET 22
> +#define STIH416_HVA_SOFTRESET 23
> +#define STIH416_COMPO_M_SOFTRESET 24
> +#define STIH416_COMPO_A_SOFTRESET 25
> +#define STIH416_VP8_DEC_SOFTRESET 26
> +#define STIH416_VTG_MAIN_SOFTRESET 27
> +#define STIH416_KEYSCAN_SOFTRESET 28
> +
> +#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH416 */
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Thanks
prev parent reply other threads:[~2015-02-23 15:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-17 13:42 [PATCH] ARM: STi: DT: Move reset controller constants into common location Philipp Zabel
2015-02-23 15:46 ` Patrice Chotard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54EB4B70.60908@st.com \
--to=patrice.chotard@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.