From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jay Foster Date: Tue, 24 Feb 2015 16:26:44 +0000 Subject: Re: [lm-sensors] ITE 8620E Support Message-Id: <54ECA644.4010805@roadrunner.com> List-Id: References: <543DD4BE.9000308@roadrunner.com> In-Reply-To: <543DD4BE.9000308@roadrunner.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org On 2/24/2015 4:11 AM, Jean Delvare wrote: > Hi Jay, > > On Tue, 14 Oct 2014 18:58:22 -0700, Jay Foster wrote: >> I have a new Gigabyte Z97X-UD5H motherboard that has the ITE 8620E >> chip. I see on the wiki/Devices site that there is no driver for it. >> The notes state that you can try loading the it87 module with the >> force_id=3D0x8728 option. I can confirm that this did succeed and senso= rs >> reports voltages and fan speeds. I don't know if fan speed control work= s. > Thanks for the report. Can you please share the actual output of > "sensors" with us? > I have also included a copy of my /etc/sensors.d/gigabyte.conf file to=20 apply labels to the fans I have hooked up. The items commented out are=20 guesses. /etc/sensors.d/gigabyte.conf: # libsensors configuration file # for Gigabyte Z97X-UD5H MB # ----------------------------- # # The it87.ko driver does not support the ITE 8620E chip. The it87.ko # driver is force loaded with the force_id=3D0x8728 option. This is why # both the it8728-* and it6820-* chips are listed here. # chip "it8728-*" "it8620-*" # Fans label fan1 "CPU fan" set fan1_min 700 label fan5 "Sys1 fan" set fan5_min 200 # label fan4 "Sys2 fan" # set fan4_min 200 # label fan3 "Sys3 fan" # set fan3_min 200 # label fan2 "Sys4 fan" # set fan2_min 200 ### temperatures # label temp1 "System temp" # tops at 33 degrees C # set temp1_min 10 # set temp1_max 60 # ignore temp2 # shows always 25 degrees C # set temp2_min 0 # set temp2_max 60 # label temp3 "CPU temp" # set temp3_min 10 # set temp3_max 85 sensors output: acpitz-virtual-0 Adapter: Virtual device temp1: +27.8=B0C (crit =3D +105.0=B0C) temp2: +29.8=B0C (crit =3D +105.0=B0C) it8728-isa-0a30 Adapter: ISA adapter in0: +0.04 V (min =3D +0.00 V, max =3D +3.06 V) in1: +2.04 V (min =3D +0.00 V, max =3D +3.06 V) in2: +2.02 V (min =3D +0.00 V, max =3D +3.06 V) in3: +2.02 V (min =3D +0.00 V, max =3D +3.06 V) in4: +0.01 V (min =3D +0.00 V, max =3D +3.06 V) in5: +1.76 V (min =3D +0.00 V, max =3D +3.06 V) in6: +1.50 V (min =3D +0.00 V, max =3D +3.06 V) 3VSB: +3.38 V (min =3D +0.00 V, max =3D +6.12 V) Vbat: +3.02 V CPU fan: 2368 RPM (min =3D 700 RPM) fan2: 0 RPM (min =3D 0 RPM) fan3: 0 RPM (min =3D 0 RPM) fan4: 0 RPM (min =3D 0 RPM) Sys1 fan: 543 RPM (min =3D 200 RPM) temp1: +30.0=B0C (low =3D +127.0=B0C, high =3D +127.0=B0C) sensor= =3D=20 thermistor temp2: +35.0=B0C (low =3D +127.0=B0C, high =3D +127.0=B0C) sensor= =3D=20 thermistor temp3: +21.0=B0C (low =3D +127.0=B0C, high =3D +127.0=B0C) sensor= =3D=20 Intel PECI intrusion0: ALARM coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +30.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) Core 0: +30.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) Core 1: +29.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) Core 2: +25.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) Core 3: +28.0=B0C (high =3D +80.0=B0C, crit =3D +100.0=B0C) _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors