* [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support
@ 2015-02-25 12:55 Fabio Estevam
2015-02-25 12:55 ` [U-Boot] [PATCH 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options Fabio Estevam
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Fabio Estevam @ 2015-02-25 12:55 UTC (permalink / raw)
To: u-boot
With UMS support we are able to flash the eMMC from U-boot, which is very
convenient.
Add UMS support to make the eMMC flashing process easier.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
board/warp/warp.c | 6 ++++++
include/configs/warp.h | 26 ++++++++++++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/board/warp/warp.c b/board/warp/warp.c
index 3b275c2..21ac5e7 100644
--- a/board/warp/warp.c
+++ b/board/warp/warp.c
@@ -21,6 +21,7 @@
#include <watchdog.h>
#include <fsl_esdhc.h>
#include <mmc.h>
+#include <usb.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -82,6 +83,11 @@ int board_mmc_init(bd_t *bis)
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
}
+int board_usb_phy_mode(int port)
+{
+ return USB_INIT_DEVICE;
+}
+
int board_early_init_f(void)
{
setup_iomux_uart();
diff --git a/include/configs/warp.h b/include/configs/warp.h
index 82036e4..cfc2323 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -120,6 +120,32 @@
#define CONFIG_CMD_CACHE
#endif
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */
+#endif
+
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+
+#define CONFIG_G_DNL_VENDOR_NUM 0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER "FSL"
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options
2015-02-25 12:55 [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support Fabio Estevam
@ 2015-02-25 12:55 ` Fabio Estevam
2015-02-25 16:27 ` Otavio Salvador
2015-02-25 16:28 ` [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support Otavio Salvador
2015-02-27 8:37 ` Stefano Babic
2 siblings, 1 reply; 7+ messages in thread
From: Fabio Estevam @ 2015-02-25 12:55 UTC (permalink / raw)
To: u-boot
Add EXT2/EXT4 and BOUNCE_BUFFER support.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
include/configs/warp.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/configs/warp.h b/include/configs/warp.h
index cfc2323..8379cec 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -46,6 +46,10 @@
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
--
1.9.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support
2015-02-25 12:55 [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support Fabio Estevam
2015-02-25 12:55 ` [U-Boot] [PATCH 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options Fabio Estevam
@ 2015-02-25 16:28 ` Otavio Salvador
2015-02-27 8:37 ` Stefano Babic
2 siblings, 0 replies; 7+ messages in thread
From: Otavio Salvador @ 2015-02-25 16:28 UTC (permalink / raw)
To: u-boot
On Wed, Feb 25, 2015 at 9:55 AM, Fabio Estevam
<fabio.estevam@freescale.com> wrote:
> With UMS support we are able to flash the eMMC from U-boot, which is very
> convenient.
>
> Add UMS support to make the eMMC flashing process easier.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 7+ messages in thread
* [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support
2015-02-25 12:55 [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support Fabio Estevam
2015-02-25 12:55 ` [U-Boot] [PATCH 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options Fabio Estevam
2015-02-25 16:28 ` [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support Otavio Salvador
@ 2015-02-27 8:37 ` Stefano Babic
2015-02-27 9:04 ` Stefano Babic
2 siblings, 1 reply; 7+ messages in thread
From: Stefano Babic @ 2015-02-27 8:37 UTC (permalink / raw)
To: u-boot
Hi Fabio,
On 25/02/2015 13:55, Fabio Estevam wrote:
> With UMS support we are able to flash the eMMC from U-boot, which is very
> convenient.
>
> Add UMS support to make the eMMC flashing process easier.
>
Maybe you want to say USB and not UMS, is it ?
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> board/warp/warp.c | 6 ++++++
> include/configs/warp.h | 26 ++++++++++++++++++++++++++
> 2 files changed, 32 insertions(+)
>
> diff --git a/board/warp/warp.c b/board/warp/warp.c
> index 3b275c2..21ac5e7 100644
> --- a/board/warp/warp.c
> +++ b/board/warp/warp.c
> @@ -21,6 +21,7 @@
> #include <watchdog.h>
> #include <fsl_esdhc.h>
> #include <mmc.h>
> +#include <usb.h>
>
> DECLARE_GLOBAL_DATA_PTR;
>
> @@ -82,6 +83,11 @@ int board_mmc_init(bd_t *bis)
> return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
> }
>
> +int board_usb_phy_mode(int port)
> +{
> + return USB_INIT_DEVICE;
> +}
> +
> int board_early_init_f(void)
> {
> setup_iomux_uart();
> diff --git a/include/configs/warp.h b/include/configs/warp.h
> index 82036e4..cfc2323 100644
> --- a/include/configs/warp.h
> +++ b/include/configs/warp.h
> @@ -120,6 +120,32 @@
> #define CONFIG_CMD_CACHE
> #endif
>
> +/* USB Configs */
> +#define CONFIG_CMD_USB
> +#ifdef CONFIG_CMD_USB
> +#define CONFIG_USB_EHCI
> +#define CONFIG_USB_EHCI_MX6
> +#define CONFIG_USB_STORAGE
> +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
> +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
> +#define CONFIG_MXC_USB_FLAGS 0
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */
> +#endif
> +
> +#define CONFIG_CI_UDC
> +#define CONFIG_USBD_HS
> +#define CONFIG_USB_GADGET_DUALSPEED
> +
> +#define CONFIG_USB_GADGET
> +#define CONFIG_CMD_USB_MASS_STORAGE
> +#define CONFIG_USB_GADGET_MASS_STORAGE
> +#define CONFIG_USBDOWNLOAD_GADGET
> +#define CONFIG_USB_GADGET_VBUS_DRAW 2
> +
> +#define CONFIG_G_DNL_VENDOR_NUM 0x0525
> +#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
> +#define CONFIG_G_DNL_MANUFACTURER "FSL"
> +
> #define CONFIG_EXTRA_ENV_SETTINGS \
> "script=boot.scr\0" \
> "image=zImage\0" \
>
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support
2015-02-27 8:37 ` Stefano Babic
@ 2015-02-27 9:04 ` Stefano Babic
0 siblings, 0 replies; 7+ messages in thread
From: Stefano Babic @ 2015-02-27 9:04 UTC (permalink / raw)
To: u-boot
On 27/02/2015 09:37, Stefano Babic wrote:
> Hi Fabio,
>
> On 25/02/2015 13:55, Fabio Estevam wrote:
>> With UMS support we are able to flash the eMMC from U-boot, which is very
>> convenient.
>>
>> Add UMS support to make the eMMC flashing process easier.
>>
>
> Maybe you want to say USB and not UMS, is it ?
ok, after a coffe I get now this is User Mass Storage. I should remember
to take always a coffe before reading patches...
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 7+ messages in thread
[parent not found: <mailman.5.1425034801.843.u-boot@lists.denx.de>]
* [U-Boot] U-Boot Digest, Vol 81, Issue 61
[not found] <mailman.5.1425034801.843.u-boot@lists.denx.de>
@ 2015-02-27 12:38 ` Soeren Moch
2015-02-27 12:40 ` [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support Soeren Moch
0 siblings, 1 reply; 7+ messages in thread
From: Soeren Moch @ 2015-02-27 12:38 UTC (permalink / raw)
To: u-boot
> Date: Fri, 27 Feb 2015 10:04:23 +0100
> From: Stefano Babic<sbabic@denx.de>
> To: Stefano Babic<sbabic@denx.de>, Fabio Estevam
> <fabio.estevam@freescale.com>
> Cc:u-boot at lists.denx.de,otavio at ossystems.com.br
> Subject: Re: [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support
> Message-ID:<54F03317.3040709@denx.de>
> Content-Type: text/plain; charset=windows-1252
>
> On 27/02/2015 09:37, Stefano Babic wrote:
>> >Hi Fabio,
>> >
>> >On 25/02/2015 13:55, Fabio Estevam wrote:
>>> >>With UMS support we are able to flash the eMMC from U-boot, which is very
>>> >>convenient.
>>> >>
>>> >>Add UMS support to make the eMMC flashing process easier.
>>> >>
>> >
>> >Maybe you want to say USB and not UMS, is it ?
> ok, after a coffe I get now this is User Mass Storage. I should remember
> to take always a coffe before reading patches...
>
I would say: USB Mass Storage, as the command config option and the USB class is named.
Only the help text for the u-boot ums command says "User Mass Storage", I have no idea where this comes from.
Regards,
Soeren
^ permalink raw reply [flat|nested] 7+ messages in thread* [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support
2015-02-27 12:38 ` [U-Boot] U-Boot Digest, Vol 81, Issue 61 Soeren Moch
@ 2015-02-27 12:40 ` Soeren Moch
0 siblings, 0 replies; 7+ messages in thread
From: Soeren Moch @ 2015-02-27 12:40 UTC (permalink / raw)
To: u-boot
[sorry, this was the wrong subject text]
>>> >Hi Fabio,
>>> >
>>> >On 25/02/2015 13:55, Fabio Estevam wrote:
>>>> >>With UMS support we are able to flash the eMMC from U-boot, which is very
>>>> >>convenient.
>>>> >>
>>>> >>Add UMS support to make the eMMC flashing process easier.
>>>> >>
>>> >
>>> >Maybe you want to say USB and not UMS, is it ?
>> ok, after a coffe I get now this is User Mass Storage. I should remember
>> to take always a coffe before reading patches...
>>
> I would say: USB Mass Storage, as the command config option and the USB class is named.
> Only the help text for the u-boot ums command says "User Mass Storage", I have no idea where this comes from.
>
> Regards,
> Soeren
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-02-27 12:40 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-25 12:55 [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support Fabio Estevam
2015-02-25 12:55 ` [U-Boot] [PATCH 2/2] warp: Select BOUNCE_BUFFER and CMD_EXT options Fabio Estevam
2015-02-25 16:27 ` Otavio Salvador
2015-02-25 16:28 ` [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support Otavio Salvador
2015-02-27 8:37 ` Stefano Babic
2015-02-27 9:04 ` Stefano Babic
[not found] <mailman.5.1425034801.843.u-boot@lists.denx.de>
2015-02-27 12:38 ` [U-Boot] U-Boot Digest, Vol 81, Issue 61 Soeren Moch
2015-02-27 12:40 ` [U-Boot] [PATCH 1/2] warp: Add User Mass Storage support Soeren Moch
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.