Re: [Xenomai] Xenomai/cobalt: low_init(): binding failed: Function not implemented error issued when trting to run latency app on xeno 3.x-rc3

[Philippe Gerum <rpm@xenomai.org>]

On 03/03/2015 05:38 PM, Helder Daniel wrote:
> 
> On 3 March 2015 at 15:44, Philippe Gerum <rpm@xenomai.org
> <mailto:rpm@xenomai.org>> wrote:
> 
>     On 03/03/2015 04:40 PM, Helder Daniel wrote:
>     > I did not set --prefix.
>     > I assumed the default value will be applied: /usr/xenomai
> 
>     This is the case, unless something goes wrong while configuring. Can you
>     check the value reported in the config log when running the configure
>     script?
> 
> 
> 
> this is the last 20 lines of config.log. Exit status is 0.
> SO it appear that configuring was done properly.

No, this does not prove that all settings were sane. $prefix is clearly
not right in this case, since CONFIG_XENO_PREFIX basically mirrors it.

> but: #define CONFIG_XENO_PREFIX "NONE"
> maybe that's the problem?

Yes, it is for sure the problem. CONFIG_XENO_PREFIX is set to the
$prefix value from the autoconf script. Please attach the file
config.log which was generated by the configure script.

-- 
Philippe.