Re: [Xenomai] Xenomai/cobalt: low_init(): binding failed: Function not implemented error issued when trting to run latency app on xeno 3.x-rc3

[Philippe Gerum <rpm@xenomai.org>]

On 03/03/2015 06:03 PM, Philippe Gerum wrote:
> On 03/03/2015 05:38 PM, Helder Daniel wrote:
>>
>> On 3 March 2015 at 15:44, Philippe Gerum <rpm@xenomai.org
>> <mailto:rpm@xenomai.org>> wrote:
>>
>>     On 03/03/2015 04:40 PM, Helder Daniel wrote:
>>     > I did not set --prefix.
>>     > I assumed the default value will be applied: /usr/xenomai
>>
>>     This is the case, unless something goes wrong while configuring. Can you
>>     check the value reported in the config log when running the configure
>>     script?
>>
>>
>>
>> this is the last 20 lines of config.log. Exit status is 0.
>> SO it appear that configuring was done properly.
> 
> No, this does not prove that all settings were sane. $prefix is clearly
> not right in this case, since CONFIG_XENO_PREFIX basically mirrors it.
> 
>> but: #define CONFIG_XENO_PREFIX "NONE"
>> maybe that's the problem?
> 
> Yes, it is for sure the problem. CONFIG_XENO_PREFIX is set to the
> $prefix value from the autoconf script. Please attach the file
> config.log which was generated by the configure script.
> 

In addition, please send the output of /usr/xenomai/sbin/version -a.

-- 
Philippe.