From: Fleck <Fleck@Rullz.lv>
To: linux-ide@vger.kernel.org, lkml@vger.kernel.org
Subject: eSata problem
Date: Sun, 08 Mar 2015 01:21:34 +0200 [thread overview]
Message-ID: <54FB87FE.3050109@Rullz.lv> (raw)
Hello, I have got the following eSata 4-bay device:
http://www.mediasonic.ca/product.php?id=1357292050
Motherboard Asus M5A97 EVO R2.0 with eSata controler: 04:00.0 SATA
controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
As you can see, the 4-bay device needs Port Multiplier, in Windows 7
everything works fine (just saying, hardware is OK), all 4 disk drives
are detected, but in linux not a single drive is detected! Here is dmesg
output after powering 4-bay device off and on again:
[ 1438.120315] ata11: exception Emask 0x10 SAct 0x0 SErr 0x10002 action
0xe frozen
[ 1438.120323] ata11: irq_stat 0x00400000, PHY RDY changed
[ 1438.120329] ata11: SError: { RecovComm PHYRdyChg }
[ 1438.120340] ata11: hard resetting link
[ 1438.842876] ata11: SATA link down (SStatus 0 SControl 300)
[ 1438.842896] ata11: EH complete
[ 1449.670083] ata11: exception Emask 0x10 SAct 0x0 SErr 0x4040000
action 0xe frozen
[ 1449.670091] ata11: irq_stat 0x00000040, connection status changed
[ 1449.670097] ata11: SError: { CommWake DevExch }
[ 1449.670107] ata11: hard resetting link
[ 1455.601866] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1460.599233] ata11.00: qc timeout (cmd 0xec)
[ 1460.599247] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1460.599255] ata11: hard resetting link
[ 1461.090989] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1471.085591] ata11.00: qc timeout (cmd 0xec)
[ 1471.085605] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1471.085636] ata11: limiting SATA link speed to 1.5 Gbps
[ 1471.085642] ata11: hard resetting link
[ 1471.577336] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1501.561182] ata11.00: qc timeout (cmd 0xec)
[ 1501.561196] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 1501.561204] ata11: hard resetting link
[ 1502.052960] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1502.052980] ata11: EH complete
Any ideas, how can I get this device working in linux?
BTW got this mail in #kernel channel @ freenode! :)
Thanks, best regards - Fleck
reply other threads:[~2015-03-07 23:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54FB87FE.3050109@Rullz.lv \
--to=fleck@rullz.lv \
--cc=linux-ide@vger.kernel.org \
--cc=lkml@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.