Re: [PATCH v1 1/3] ixgbe: Use the rte_le_to_cpu_xx()/rte_cpu_to_le_xx() when reading/setting HW ring descriptor fields

[Vlad Zolotarov <vladz-RmZWMc9puTNJc61us3aD9laTQe2KTcn/@public.gmane.org>]

On 03/09/15 18:35, Ananyev, Konstantin wrote:
>
>> -----Original Message-----
>> From: Vlad Zolotarov [mailto:vladz-RmZWMc9puTNJc61us3aD9laTQe2KTcn/@public.gmane.org]
>> Sent: Monday, March 09, 2015 12:43 PM
>> To: Ananyev, Konstantin; dev-VfR2kkLFssw@public.gmane.org
>> Subject: Re: [dpdk-dev] [PATCH v1 1/3] ixgbe: Use the rte_le_to_cpu_xx()/rte_cpu_to_le_xx() when reading/setting HW ring
>> descriptor fields
>>
>>
>>
>> On 03/09/15 12:29, Ananyev, Konstantin wrote:
>>> Hi Vlad,
>>>
>>>> -----Original Message-----
>>>> From: dev [mailto:dev-bounces-VfR2kkLFssw@public.gmane.org] On Behalf Of Vlad Zolotarov
>>>> Sent: Monday, March 09, 2015 10:13 AM
>>>> To: dev-VfR2kkLFssw@public.gmane.org
>>>> Subject: [dpdk-dev] [PATCH v1 1/3] ixgbe: Use the rte_le_to_cpu_xx()/rte_cpu_to_le_xx() when reading/setting HW ring
>> descriptor
>>>> fields
>>>>
>>>> Fixed the above in ixgbe_rx_alloc_bufs() and in ixgbe_recv_scattered_pkts().
>>>>
>>>> Signed-off-by: Vlad Zolotarov <vladz-RmZWMc9puTNJc61us3aD9laTQe2KTcn/@public.gmane.org>
>>>> ---
>>>>    lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 13 +++++++------
>>>>    1 file changed, 7 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>>>> index 9ecf3e5..b033e04 100644
>>>> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>>>> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
>>>> @@ -1028,7 +1028,7 @@ ixgbe_rx_alloc_bufs(struct igb_rx_queue *rxq)
>>>>    	struct igb_rx_entry *rxep;
>>>>    	struct rte_mbuf *mb;
>>>>    	uint16_t alloc_idx;
>>>> -	uint64_t dma_addr;
>>>> +	__le64 dma_addr;
>>> Wonder Why you changed from uint64_t to __le64 here?
>>> Effectively __le64 is the same a uint64_t,
>> I'm afraid the above it's not completely correct. See below.
>>
>>> and I think it is better to use always the same type across all PMD code for consistency.
>> Pls., note that "dma_addr" is only used (see below)...
>>
>>> Konstantin
>>>
>>>
>>>>    	int diag, i;
>>>>
>>>>    	/* allocate buffers in bulk directly into the S/W ring */
>>>> @@ -1051,7 +1051,7 @@ ixgbe_rx_alloc_bufs(struct igb_rx_queue *rxq)
>>>>    		mb->port = rxq->port_id;
>>>>
>>>>    		/* populate the descriptors */
>>>> -		dma_addr = (uint64_t)mb->buf_physaddr + RTE_PKTMBUF_HEADROOM;
>>>> +		dma_addr = rte_cpu_to_le_64(RTE_MBUF_DATA_DMA_ADDR_DEFAULT(mb));
>>>>    		rxdp[i].read.hdr_addr = dma_addr;
>>>>    		rxdp[i].read.pkt_addr = dma_addr;
>> here. ;) And the type of both hdr_addr and pkt_addr is __le64.
>> I don't exactly understand what do u mean by "use the same type across
>> all PMD code for consistency" - there are a lot of types used in the PMD
>> code and __le64 is one of them... ;)
>>
>> Now more seriously, let's recall what is the semantics of the __leXX
>> types - they represent the integer in the "little endian" format. Here,
>> NIC expects the physical address in a little endian format, thus the
>> descriptor is defined the way it is defined - using __le64. The same
>> relates to dma_addr local variable in this patch - it contains the
>> physical (more correctly "DMA-able") address of the Rx buffer in the
>> form NIC expects it to be written in the descriptor.
>>
>> So, why to use __leXX anyway? - Debugging the (invalid) endianess is a
>> real headache. Therefore there are a few static code analysis tools like
>> "sparse" that allow to detect such inconsistencies (see here
>> http://en.wikipedia.org/wiki/Sparse) and __leXX is a helper to allow
>> tools like sparse to detect such problems.
> I meant that for librte_pmd_ixgbe these types are equivalent:
> lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h:
> #ifndef __le64
> #define __le64  u64
> #endif
>
> lib/librte_pmd_ixgbe/ixgbe/ixgbe_osdep.h:
> typedef uint64_t       u64;
>
> So why not to use just uint64_t as the rest if librt_pmd_ixgbe/ixgbe_*.[c,h]?

I'm sorry but it seems to me that I have already mentioned that it 
wasn't the first time __leXX is used in the ixgbe_*.[ch]. All structs 
describing the descriptors of HW rings in ixgbe_type.h use them, so I'm 
just continuing what has already been done.

>
> Have to admit, didn't know about the sparse and that ability.
> Seems like useful one.
> Though, as I understand, to make any use of it with DPDK,
> we'll have to use sparse specific attributes:
> In one of our files define __le64 as '__attribute__((bitwise)) uint64_t'
> or something similar, right?

Right.

> Otherwise there is no much point in using all these '__leXX' types,
> except probably to show an intention, correct?

Not exactly. If u use these types everywhere where it's needed it's only 
6 lines to patch (__le16,32,64 + __be16,32,64) to make sparse work. And 
if u don't - there are thousands of lines to check somehow.

thanks,
vlad
> Konstantin
>
>> In addition after spending some time writing patches for Linux netdev
>> list u develop a strong habit for such stuff - Dave and others are very
>> strict about such things... ;)
>>
>> So, is it the same as uint64_t? I guess now it's clear why it is now... ;)
>>
>>>>    	}
>>>> @@ -1559,13 +1559,14 @@ ixgbe_recv_scattered_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
>>>>    		first_seg->ol_flags = pkt_flags;
>>>>
>>>>    		if (likely(pkt_flags & PKT_RX_RSS_HASH))
>>>> -			first_seg->hash.rss = rxd.wb.lower.hi_dword.rss;
>>>> +			first_seg->hash.rss =
>>>> +				    rte_le_to_cpu_32(rxd.wb.lower.hi_dword.rss);
>>>>    		else if (pkt_flags & PKT_RX_FDIR) {
>>>>    			first_seg->hash.fdir.hash =
>>>> -				(uint16_t)((rxd.wb.lower.hi_dword.csum_ip.csum)
>>>> -					   & IXGBE_ATR_HASH_MASK);
>>>> +			    rte_le_to_cpu_16(rxd.wb.lower.hi_dword.csum_ip.csum)
>>>> +					   & IXGBE_ATR_HASH_MASK;
>>>>    			first_seg->hash.fdir.id =
>>>> -				rxd.wb.lower.hi_dword.csum_ip.ip_id;
>>>> +			  rte_le_to_cpu_16(rxd.wb.lower.hi_dword.csum_ip.ip_id);
>>>>    		}
>>>>
>>>>    		/* Prefetch data of first segment, if configured to do so. */
>>>> --
>>>> 2.1.0