From: J William Piggott <elseifthen@gmx.com>
To: Karel Zak <kzak@redhat.com>
Cc: util-linux@vger.kernel.org
Subject: [PATCH 5/5] hwclock: man-page errata
Date: Fri, 13 Mar 2015 15:26:18 -0400 [thread overview]
Message-ID: <550339DA.1060408@gmx.com> (raw)
In-Reply-To: <5503364E.6010302@gmx.com>
The information I wrote regarding clock crystals was not
only incomplete, it was wrong. The characteristics of
quartz crystals is beyond the scope of this man-page. It
was misguided to attempt to include it. This commit
removes said information.
Signed-off-by: J William Piggott <elseifthen@gmx.com>
---
sys-utils/hwclock.8.in | 22 ----------------------
1 file changed, 22 deletions(-)
diff --git a/sys-utils/hwclock.8.in b/sys-utils/hwclock.8.in
index 8cf86a3..79c7907 100644
--- a/sys-utils/hwclock.8.in
+++ b/sys-utils/hwclock.8.in
@@ -938,28 +938,6 @@ Clock is corrected properly at startup. To check this, first make sure
that the System Time is correct before shutdown and then use
.BR \%sntp ", or " \%date\ \-Ins
and a precision timepiece, immediately after startup.
-.PP
-Both clocks typically use a quartz crystal oscillator. Crystals are
-used for reference oscillators in electronics because by most measures
-they produce a very clean and stable sine wave. Their greatest
-shortcoming is that they have a Positive Temperature Coefficient;
-meaning that their frequency increases as the temperature increases and
-vise versa. Therefore, both the Hardware and System Clock's drift rate
-changes with intrinsic and extrinsic machine temperatures. These
-characteristics will vary by machine depending upon its design.
-.PP
-Drift correction strategies are many, but as a general guide the goal
-would be to find a longterm average. A year long average to take into
-account seasonal ambient temperature shifts may be a good target period.
-So perhaps the date-time advances a bit in the summer and declines a bit
-in the winter, but at the end of a year it balances to zero.
-.PP
-If this is beginning to sound futile, it is not. Left on its own a
-machine can lose 3 seconds per day or more. Accumulated drift over a
-year may easily exceed half an hour. Using carefully crafted drift
-corrections can make a significant improvement in a machine's ability to
-keep reasonably good date-time.
-.
.SS LOCAL vs UTC
Keeping the Hardware Clock in a local timescale causes inconsistent
daylight saving time results:
next prev parent reply other threads:[~2015-03-13 19:26 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-13 19:11 [PATCH 1/5] hwclock: add TZDIR J William Piggott
2015-03-13 19:15 ` [PATCH 2/5] hwclock: Improve FILES section J William Piggott
2015-03-13 19:18 ` [PATCH 3/5] hwclock: remove depreciated ntpdate J William Piggott
2015-03-15 15:26 ` Benno Schulenberg
2015-03-16 0:19 ` Isaac Dunham
2015-03-16 10:33 ` Karel Zak
2015-03-17 3:37 ` J William Piggott
2015-03-17 9:29 ` Karel Zak
2015-03-17 21:10 ` J William Piggott
2015-03-13 19:22 ` [PATCH 4/5] hwclock: add '11 minute mode' information J William Piggott
2015-03-15 15:47 ` Benno Schulenberg
2015-03-17 9:57 ` Karel Zak
2015-03-18 1:16 ` J William Piggott
2015-03-18 9:43 ` Karel Zak
2015-03-13 19:26 ` J William Piggott [this message]
2015-03-15 15:51 ` [PATCH 5/5] hwclock: man-page errata Benno Schulenberg
2015-03-15 15:20 ` [PATCH 1/5] hwclock: add TZDIR Benno Schulenberg
2015-03-16 10:30 ` Karel Zak
2015-03-17 9:58 ` Karel Zak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=550339DA.1060408@gmx.com \
--to=elseifthen@gmx.com \
--cc=kzak@redhat.com \
--cc=util-linux@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.